PIC Microcontroller | ADC Interfacing

Feb 28, 2019Download as pptx, pdf1 like3,509 views

International Institute of Information Technology (I²IT)

Analog to Digital Converter (ADC) is a device that converts an analog quantity (continuous voltage) to discrete digital values. The PIC microcontroller can be used in various electronic devices like alarm systems, electronic gadgets and computer control systems.

1
PIC Microcontroller
Prof. Ashvini Kulkarni
Assistant Professor
Department of Electronics & Telecommunication
Hope Foundation’s
International Institute of Information Technology, I²IT
www.isquareit.edu.in

 Characteristics of ADC
 PIC 18 ADC features
 PIC 18 ADC control registers
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
2

 Analog signal is converted into a digital data that
can be processed using a digital computer.
 Types of ADC:
 Slope and double-slope type
 Flash type
 Successive approximation
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
3

 Characteristics of ADC[2]:
1. Resolution:
 ADC has n- bit resolution(where n=8,10,12,16,24
bits)
 Higher the resolution smaller the step size
 If ADC has 8 bit resolution means 2^8= 256(No. of
steps)
 Applied voltage is Vref=5v then 5/256=19.53 mv
(step size)
2. Conversion time:
 The time it takes for the converting analog input to
digital output Vref:It is input voltage used for the
reference voltage
 Vref/no. of steps(Vref is responsible for step size)
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
4

 Characteristics of ADC:
3. Digital data output:
 8 bit ADC, we have 8bit digital data output of D0
–D7
 Dout=Vin/step size[2]
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
5

 Features of ADC
1) The ADC in PIC18F4550 is a successive
approximation ADC with a resolution of 10 bits.
2) It has 10 input channels.
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
6

Configuring Registers
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in7
The PIC18 Microcontroller
- The A/D converter has the following
registers[1]:
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
• A/D Control Register 2 (ADCON2)
• A/D Result High Register (ADRESH)
• A/D Result Low Register (ADRESL)

Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
8
Figure No. 1: Block diagram of ADC in PIC18f4550[1]

 Each port pin associated with the A/D
converter can be configured as an
analog input or as a digital I/O.
 When the A/D conversion is complete,
the result is loaded into the
ADRESH:ADRESL registers,
 the GO/DONE bit (ADCON0 register) is
cleared and A/D Interrupt Flag bit,
ADIF, is set.
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
9

 The analog reference voltage is
software selectable to either the
device’s positive and negative supply
voltage (VDD and VSS) or the voltage
level on the RA3/AN3/VREF+ and
RA2/AN2/VREF-/CVREF pins.
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
10

1. Configure the A/D module: Configure analog pins,
voltage reference and digital I/O (ADCON1)
 Select A/D input channel (ADCON0)
 Select A/D acquisition time (ADCON2)
 Select A/D conversion clock (ADCON2)
 Turn on A/D module (ADCON0)
2. Configure A/D interrupt (if desired):
 Clear ADIF bit
 Set ADIE bit
 Set GIE bit
3. Wait the required acquisition time (if required).
 Start conversion
 Set GO/DONE=1 bit in (ADCON0 register)
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
11

5. Wait for A/D conversion to complete, by either:
 Polling for the GO/DONE bit to be cleared OR Waiting
for the A/D interrupt
6. Read A/D Result registers (ADRESH:ADRESL);
 clear bit ADIF, if interrupt bit is set.
7. For next conversion, go to step 1 or step 2, as
required.
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
12

[1] Microchip datasheet of PIC18F2455/2550/4455/4550
[2] Muhamad Ali Mazidi,Rolind D Mckinly,”PIC
microcontroller and embedded systems”Pearson
publication.
Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057
Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - info@isquareit.edu.in
13

For further information please contact
Ashvini Kulkarni
Department of Electronics & Telecommunication
Hope Foundation’s International Institute of
Information Technology, I²IT
Hinjawadi, Pune – 411 057
Phone - +91 20 22933441
www.isquareit.edu.in | ashvinik@isquareit.edu.in
| info@isquareit.edu.in
14

This document provides an overview of analog to digital converters (ADCs) and describes how to interface the ADC0804 and ADC0808/0809 chips with an 8051 microcontroller. It discusses the basic functions and pinouts of the ADC0804 chip, how to convert analog voltages to digital values using its reference pin, and the steps to read output data. It also covers the channel selection, reference voltage, and programming steps for the 8-channel ADC0808/0809 chip. Timing diagrams are included to illustrate the read and write processes.

PIC 16F877A by PARTHIBAN. S.parthi_arjun

Serial Communication in 8051Sudhanshu Janwadkar

LPC 2148 ARM MICROCONTROLLERsravannunna24

Interfacing with peripherals: analog to digital converters and digital to ana...NimeshSingh27

Microcontroller 8051 and its interfacingAnkur Mahajan

The document discusses microcontrollers and interfacing. It begins with definitions of microprocessors and microcontrollers, comparing their differences. It then focuses on the 8051 microcontroller, describing its features, block diagram, manufacturers, and addressing modes. The document outlines how to write programs for the 8051 and discusses real-world interfacing examples like LCDs, ADCs, relays, motors. It concludes with applications of the 8051 and contact information.

8051 Microcontroller pptRahul Kumar

The document discusses the 8051 microcontroller, including its architecture, pin configuration, memory organization, timers, interrupts, and interfacing capabilities. It describes the 8051's features like on-chip RAM, ROM, timers and low power consumption which make it suitable for control applications. The document outlines the differences between microprocessors and microcontrollers, and covers various interfacing examples like switches, LEDs, 7-segment displays, LCDs, ADCs and relay interfacing. It concludes with common applications of the 8051 such as in automobiles, industrial processing, robotics and consumer electronics.

DAC Interfacing with 8051.pdfSrikrishna Thota

This document discusses interfacing a digital-to-analog converter (DAC) with an 8051 microcontroller. It explains that a DAC is used to convert digital pulses from the 8051 into analog signals that can be read by systems requiring analog inputs. Specifically, it describes using an 8-bit DAC 0808 chip to convert digital data from the 8051 into a corresponding analog output voltage. It also provides 8051 assembly code examples to generate triangular and square wave outputs using a DAC interfaced with an 8051 port.

Interfacing adcPRADEEP

The document discusses interfacing an analog to digital converter (ADC) chip, specifically the 0804 and 0808 chips, with a microcontroller. It explains that the ADC converts an analog voltage to an 8-bit digital value representing voltages from 0 to 255. It provides the initialization and timing steps to start a conversion by writing to the chip and read the digital output by reading from the chip once conversion is complete.

Interfacing Stepper motor with 8051Pantech ProLabs India Pvt Ltd

The document discusses interfacing a stepper motor with an 8051 microcontroller. A stepper motor can divide a full rotation into discrete steps through energizing coils in different sequences. The stepper motor can be interfaced with an 8051 using an L293D motor driver connected to ports P1.0, P1.2, P1.3, and P1.4 of the 8051. Both full-step and half-step sequences are described for energizing the coils to precisely control the motor's position without feedback. Assembly and C code examples are provided to demonstrate clockwise and counterclockwise rotation of the stepper motor connected to the 8051.

8051 microcontroller featuresTech_MX

The document discusses the 8051 microcontroller, its features, and applications. It provides details on the 8051's architecture including its CPU, memory blocks, I/O ports, timers/counters, and serial communication capabilities. It describes the 8051's registers including TMOD and TCON for timer control. The document also covers the 8051's memory mapping and provides many examples of how 8051 microcontrollers are used in applications like cell phones, appliances, industrial systems, and more.

Keypad Interfacing with 8051 MicrocontrollerSudhanshu Janwadkar

Introduction to ARM LPC2148Veera Kumar

This document provides an introduction to pins, ports, and configuring pins on the ARM LPC2148 microcontroller. It discusses pin configuration, the different ports on the LPC2148, and how to configure pins as inputs, outputs, or alternate functions using the various IO registers. It also provides an example program for blinking an LED connected to pin P1.16 to demonstrate basic pin configuration and output. The document concludes with an assignment to draw the LED blinking circuit and modify the program to blink LEDs on pins P0.16 through P0.23.

Introduction to arm processorRAMPRAKASHT1

Analog to Digital converter in ARMAarav Soni

PIC MicrocontrollersAbdullah Saghir Ahmad

Unit III ARM Interface and ARM Programming Dr. Pankaj Zope

DAC and sensor interfacing with PICSasidharan Srinivasan

This document discusses interfacing digital-to-analog converters (DACs) and sensors with PIC microcontrollers. It introduces DACs and common DAC types like R-2R ladder and weighted resistor DACs. It then discusses interfacing a DAC0808 converter to a PIC microcontroller and sensing light intensity with an LDR light sensor. Finally, it describes interfacing the LM75 temperature sensor to a PIC, including the sensor's register structure and digital output representation of temperature readings.

Interfacing LCD with 8051 MicrocontrollerPantech ProLabs India Pvt Ltd

An LCD display is specifically designed to interface with microcontrollers and not standard ICs. It can display letters, symbols, and user-defined characters. Interfacing an LCD with an 8051 microcontroller involves understanding the LCD's pins and commands, and using C or assembly code to control write and read operations to the LCD. More details on interfacing LCDs with 8051 microcontrollers can be found on the listed websites.

8051 block diagramDominicHendry

Microcontrollers are small computers that integrate RAM, ROM, I/O ports and other components onto a single chip. They are used in applications where cost, power and space are critical. The document compares microprocessors and microcontrollers, noting that microcontrollers have all components on one chip while microprocessors have separate chips. It then describes the typical internal blocks of a microcontroller, including the CPU, memory, I/O ports, timers and serial ports. Block diagrams show the connections between these internal components.

Microcontroller 8096Mannar Hussein

The document provides an overview of the Intel 8096 microcontroller. It discusses that the 8096 is a 16-bit microcontroller belonging to the MCS-96 family, capable of high-speed calculations. It then details the 8096's specifications, including its 16-bit CPU architecture, 6 addressing modes, 64KB address space, and 256-byte register file. The document also outlines the 8096's memory architecture, which separates instruction and data pathways, as well as its I/O ports, timers, serial port, and 100 instruction set. Finally, it briefly mentions other Intel microcontroller versions such as the 8048, 8051, 80186, and 80386 EX.

8251 USARTShivamSood22

The document discusses asynchronous and synchronous serial communication using the 8251A USART chip. It describes the basics of serial communication including synchronous vs asynchronous transmission. It provides details on the components and functioning of the 8251A USART chip, including its transmitter, receiver, control logic and modem control sections. The chip allows for full-duplex serial communication and can operate in both synchronous and asynchronous modes. It converts parallel data from the microprocessor to serial data for transmission and vice versa on reception.

Stepper motor-interfacingLecturer

This document discusses interfacing and controlling a stepper motor using microcontrollers like the 8085 and 8051. It describes the basic structure of a stepper motor and explains that it rotates in fixed steps in response to electrical pulses. An interface is needed because stepper motors require more current than microcontrollers can provide. The document proposes using a ULN2003 motor driver IC to interface the stepper motor safely. It provides example assembly language code to send the necessary hexadecimal codes to rotate the stepper motor clockwise or counterclockwise using ports on the 8051 and 8255 I/O chips connected to an 8085 microcontroller.

ARM ProcessorsMathivanan Natarajan

8051 Microcontroller NotesDr.YNM

The document provides an introduction to microcontrollers, specifically focusing on the Intel 8051 microcontroller. It defines microcontrollers and distinguishes them from microprocessors by noting that microcontrollers contain peripherals like RAM, ROM, I/O ports and timers on a single chip, while microprocessors require external circuitry. It then describes the architecture and features of the Intel 8051 microcontroller, including its 4KB program memory, 128 bytes of data memory, 32 general purpose registers, two timers, interrupts and I/O ports. Development tools for microcontrollers like editors, assemblers, compilers and debuggers/simulators are also discussed.

INTRODUCTION TO MICROCONTROLLERAnkita Jaiswal

This document provides an introduction and overview of microcontrollers. It begins by defining a microcontroller as a single-chip computer containing a CPU, RAM, ROM, I/O ports, and other peripherals. It then discusses the 8051 microcontroller in more detail, outlining its addressing modes, block diagram, operation, features, applications, and advantages over microprocessors. Finally, it provides a pin description and diagram of the 8051 microcontroller.

8051 io interfaceAbhinav Shubham

This document discusses interfacing devices like LEDs, LCDs, and keyboards to an 8051 microcontroller. It begins by explaining what input/output interfacing is and the differences that exist between CPUs and peripheral devices. It then reviews the pin configuration of the 8051 and the specific devices that will be interfaced: LEDs, an LCD, and a keyboard. Wiring diagrams and code examples are provided for interfacing each device. Key concepts like scanning keyboard rows and columns, sending commands and data to an LCD, and checking an LCD's busy flag are explained.

Timing diagram 8085 microprocessorVelalar College of Engineering and Technology

The document discusses the timing diagram of the 8085 microprocessor. It explains that a timing diagram is a graphical representation of the execution time of each instruction. It then describes the different machine cycles of the 8085 including the opcode fetch cycle, memory read cycle, memory write cycle, I/O read cycle, I/O write cycle, and interrupt acknowledge cycle. It provides details on the T-states within each machine cycle and examples of timing diagrams for different instructions like STA, IN, OUT, MVI, INR and ADD. Finally, it lists several references used to collect information on the 8085 timing diagram.

Pic ppt 13104022(4th_year)Daman Singh

The document discusses interfacing analog to digital converters (ADCs), digital to analog converters (DACs), and sensors with PIC18F microcontrollers. It describes the basics of AD conversion including transducers. It then discusses characteristics, registers, and programming of the PIC18F ADC. It also covers DAC concepts and interfacing a DAC0888. Finally, it discusses temperature sensors and interfacing LM34 and LM35 sensors to measure temperature.

Módulo adc 18f4550David Narváez

The document describes the analog-to-digital converter (A/D) module for PIC18F2455/2550/4455/4550 microcontrollers. The module allows conversion of an analog input signal to a 10-bit digital number. It has 10 or 13 analog input channels depending on the device, and is controlled using three registers - ADCON0, ADCON1, and ADCON2. The ADRESH and ADRESL registers together contain the 10-bit digital output of the A/D conversion.

More Related Content

What's hot (20)

Interfacing adcPRADEEP

Interfacing Stepper motor with 8051Pantech ProLabs India Pvt Ltd

8051 microcontroller featuresTech_MX

Keypad Interfacing with 8051 MicrocontrollerSudhanshu Janwadkar

Introduction to ARM LPC2148Veera Kumar

Introduction to arm processorRAMPRAKASHT1

Analog to Digital converter in ARMAarav Soni

PIC MicrocontrollersAbdullah Saghir Ahmad

Unit III ARM Interface and ARM Programming Dr. Pankaj Zope

DAC and sensor interfacing with PICSasidharan Srinivasan

Interfacing LCD with 8051 MicrocontrollerPantech ProLabs India Pvt Ltd

8051 block diagramDominicHendry

Microcontroller 8096Mannar Hussein

8251 USARTShivamSood22

Stepper motor-interfacingLecturer

ARM ProcessorsMathivanan Natarajan

8051 Microcontroller NotesDr.YNM

INTRODUCTION TO MICROCONTROLLERAnkita Jaiswal

8051 io interfaceAbhinav Shubham

Timing diagram 8085 microprocessorVelalar College of Engineering and Technology

Interfacing adcPRADEEP

Interfacing Stepper motor with 8051Pantech ProLabs India Pvt Ltd

8051 microcontroller featuresTech_MX

Keypad Interfacing with 8051 MicrocontrollerSudhanshu Janwadkar

Introduction to ARM LPC2148Veera Kumar

Introduction to arm processorRAMPRAKASHT1

Analog to Digital converter in ARMAarav Soni

PIC MicrocontrollersAbdullah Saghir Ahmad

Unit III ARM Interface and ARM Programming Dr. Pankaj Zope

DAC and sensor interfacing with PICSasidharan Srinivasan

Interfacing LCD with 8051 MicrocontrollerPantech ProLabs India Pvt Ltd

8051 block diagramDominicHendry

Microcontroller 8096Mannar Hussein

8251 USARTShivamSood22

Stepper motor-interfacingLecturer

ARM ProcessorsMathivanan Natarajan

8051 Microcontroller NotesDr.YNM

INTRODUCTION TO MICROCONTROLLERAnkita Jaiswal

8051 io interfaceAbhinav Shubham

Timing diagram 8085 microprocessorVelalar College of Engineering and Technology

Similar to PIC Microcontroller | ADC Interfacing (20)

Pic ppt 13104022(4th_year)Daman Singh

Módulo adc 18f4550David Narváez

ADC Interfacing with pic Microcontrollertleapshare007

This document discusses analog to digital conversion and interfacing an ADC with a PIC18 microcontroller. It describes the basics of A/D conversion including using transducers to convert non-electric quantities to voltages. It also discusses the characteristics of an ideal ADC and quantization error. The document provides an example of calculating digital codes from analog voltages for a 10-bit ADC. It then describes the registers and conversion process for the A/D converter module in PIC18 microcontrollers.

adcPresentation for microcontrolling process techniqshikhashrivastava27

The principle of levelling is to obtain horizontal line of sight with respect to which vertical distances of the points above or below this line of sight are found. The principle of levelling is to obtain horizontal line of sight with respect to which vertical distances of the points above or below this line of sight are found. The principle of levelling is to obtain horizontal line of sight with respect to which vertical distances of the points above or below this line of sight are found. The principle of levelling is to obtain horizontal line of sight with respect to which vertical distances of the points above or below this line of sight are found.

PIC 16F877 micro controller by Gaurav raikarGauravRaikar3

The document discusses configuring the on-chip analog to digital converter (ADC) on the PIC16F877 microcontroller. It first provides an overview of the PIC microcontroller family and key features of the PIC16F877. It then describes the ADC registers and conversion process, including configuring the ADC module, selecting the input channel, starting the conversion, and reading the result. It includes a diagram of the ADC conversion timing and flowchart of the conversion process. An example code for reading the ADC and printing the result is also provided.

adcanddac hai kya bhayy me know if-01.pptxshivraj3252

Esp with thepic16f877ravi shankar ambati

This document is a textbook on embedded systems programming with the Microchip PIC16F877 microcontroller. It introduces embedded systems and their prevalence. It discusses four levels of embedded systems in terms of size, options, and complexity - from high level systems like air traffic control to low level systems like appliances. The book will cover fundamental and advanced embedded programming techniques that can apply to any microcontroller, as well as an introduction to digital signal processing using the PIC16F877.

Interfacing technique with 8085- ADC[0808]Guhan k

The document describes the ADC0808 analog to digital converter chip. It has an 8-channel multiplexer that selects which analog input signal to convert to digital. The conversion process takes 64 clock cycles to complete. The chip outputs the digital conversion result on 8 pins and has control signal pins for start, clock, output enable and end of conversion notification. It converts analog voltages to 8-bit digital numbers for use by digital devices like microprocessors.

Embedded system (Chapter 2) part AIkhwan_Fakrudin

The document discusses the architecture of PIC18 microcontrollers. It begins by introducing the PIC microcontroller family and noting their popularity. It then explains key aspects of the PIC18 architecture, including that it uses a Harvard architecture with separate memory spaces for instructions and data. The document outlines the main components of the PIC18 architecture, including the CPU, program ROM, data memory, I/O ports, and special function registers. It provides details on the registers used in the PIC18, including the working register WREG, general purpose registers, and special function registers.

ADC and DAC interfacing.pdfVikasMahor3

The document discusses interfacing analog to digital converters with microprocessors using the 8255 PIO. It describes how the 8255 is used to issue start of conversion pulses to the ADC and read the end of conversion and digital output signals. It provides examples of interfacing the ADC0808/0809 chip, which uses successive approximation conversion. Interfacing a digital to analog converter is also covered, with an example of interfacing the AD7523 DAC and generating an output sawtooth waveform.

digitalvoltmeterusing805112b2-170214173216 (1).pdfsatyamsinha37

This document describes the design of a digital voltmeter using an 8051 microcontroller and ADC0804 analog-to-digital converter. It includes the circuit diagram and explanations of the main components. The 8051 microcontroller reads the analog input voltage, converts it to a digital value using the successive approximation ADC0804, and displays the reading on an LCD screen. The document provides details on interfacing the ADC0804 and LCD, as well as the pin descriptions and timing diagrams for programming and operation. It aims to explain how to build a digital voltmeter circuit using low-cost microcontroller and ADC components.

DIGITAL VOLTMETER USING 8051 MICROCONTROLLERChirag Lakhani

This document describes the design of a digital voltmeter using an 8051 microcontroller. It includes the following key points: - An analog to digital converter (ADC0804) is used to convert an analog input voltage to a digital signal that can be read by the microcontroller. - The 8051 microcontroller then processes the digital signal from the ADC and displays the voltage reading on a liquid crystal display (LCD). - The circuit diagram shows how the ADC, microcontroller, and LCD are interconnected. Key components include ports for input/output, a crystal oscillator, and voltage regulators. - The document provides details on the pin configurations and functions of the 8051 microcontroller and ADC0804

Analog to digital converter (ACD)Luckysaw

An analog to digital converter (ADC) allows digital circuits to interface with the real world by converting analog signals, like sound from a microphone, into digital data. ADCs work by sampling the analog signal at discrete time intervals and then quantizing the signal amplitude into discrete levels represented by a binary code. The sampling rate must be at least twice the highest frequency component of the analog signal per the Nyquist criterion. The resolution of an ADC, defined as the smallest voltage increment it can detect, is determined by the number of bits in its output. Common applications of ADCs include data acquisition, control systems, sensors, audio/video devices, and more.

8051 interfacingKanchanPatil34

8051interfacing 190425062221Indranil Hatai

analog to digital converter and dac finalDrVikasMahor

The document discusses interfacing analog to digital converters with microprocessors using an 8255 chip as an I/O port. It describes how the 8255 is used to issue start and end of conversion signals to the ADC and read the digital output. It provides examples of interfacing common ADC chips like the 0808/0809, which use successive approximation conversion. Interfacing a digital to analog converter like the AD7523 is also covered, including a program to generate a sawtooth waveform using an 8086 CPU and 8255 port.

Tools for Practical Attacks on Analog-to-Digital ConversionAlexander Bolshev

This document discusses practical attacks on analog-to-digital converters (ADCs). It begins with an anecdote about compromising a programmable logic controller (PLC) and bypassing monitoring systems. It then covers different types of ADCs and their vulnerabilities. Examples are provided of proof-of-concept attacks injecting arbitrary waveform signals and altering the digital representation of analog signals. Various hardware is demonstrated for evaluating ADCs, including signal generators, function generators, and data acquisition systems. Mitigation techniques are proposed, such as implementing appropriate anti-aliasing filters and randomizing sampling frequencies.

AVR_Course_Day6 external hardware interrupts and analogue to digital converterMohamed Ali

The document discusses external hardware interrupts and analog to digital converters (ADCs) for AVR microcontrollers. It covers: 1. External interrupt registers and programming, describing how to enable/disable interrupts using SREG and EIMSK registers. 2. ADC features of AVRs, including its 10-bit resolution, registers like ADMUX for selecting channels and references, and ADCSRA for control. 3. Programming ADC using polling or interrupts in C, with examples provided. ADC polling requires waiting for conversion to complete by checking ADIF, while interrupts use ADIE.

lab_ADC.pdfboukomra

This document describes a lab experiment using an analog temperature sensor connected to a PIC18F microcontroller. The objectives are to describe the analog-to-digital converter (ADC) section of the PIC18F, connect an LM35 temperature sensor, and program the PIC18F to read the sensor values using its ADC. Students will write code to take an ADC reading from the temperature sensor on channel 7, display the 10-bit value on 8 LEDs, and turn off the LEDs when a button is pressed. The document provides background on ADCs and guidance on connecting the sensor and programming the ADC to read temperature values in Celsius.

FALLSEM2024-25_BEEE309L_TH_VL2024250101214_2024-10-05_Reference-Material-I.pptxRahultater4

Pic ppt 13104022(4th_year)Daman Singh

Módulo adc 18f4550David Narváez

ADC Interfacing with pic Microcontrollertleapshare007

adcPresentation for microcontrolling process techniqshikhashrivastava27

PIC 16F877 micro controller by Gaurav raikarGauravRaikar3

adcanddac hai kya bhayy me know if-01.pptxshivraj3252

Esp with thepic16f877ravi shankar ambati

Interfacing technique with 8085- ADC[0808]Guhan k

Embedded system (Chapter 2) part AIkhwan_Fakrudin

ADC and DAC interfacing.pdfVikasMahor3

digitalvoltmeterusing805112b2-170214173216 (1).pdfsatyamsinha37

DIGITAL VOLTMETER USING 8051 MICROCONTROLLERChirag Lakhani

Analog to digital converter (ACD)Luckysaw

8051 interfacingKanchanPatil34

8051interfacing 190425062221Indranil Hatai

analog to digital converter and dac finalDrVikasMahor

Tools for Practical Attacks on Analog-to-Digital ConversionAlexander Bolshev

AVR_Course_Day6 external hardware interrupts and analogue to digital converterMohamed Ali

lab_ADC.pdfboukomra

FALLSEM2024-25_BEEE309L_TH_VL2024250101214_2024-10-05_Reference-Material-I.pptxRahultater4

More from International Institute of Information Technology (I²IT) (20)

Minimization of DFAInternational Institute of Information Technology (I²IT)

Understanding Natural Language ProcessingInternational Institute of Information Technology (I²IT)

What Is Smart Computing?International Institute of Information Technology (I²IT)

Smart computing involves connecting devices like appliances, phones, and infrastructure to the internet and each other. This allows them to become aware of their environment and each other's status, enabling new functionalities. For example, a smart fridge can sense when supplies are low and automatically place an order. Key aspects of smart computing include awareness, analysis of data, evaluating alternatives, taking appropriate actions, and ensuring accountability of the system. While smart computing provides benefits, it also raises issues regarding data privacy, security, and standardization that must be addressed.

Professional Ethics & Etiquette: What Are They & How Do I Get Them?International Institute of Information Technology (I²IT)

Writing Skills: Importance of Writing SkillsInternational Institute of Information Technology (I²IT)

Professional Communication | Introducing Oneself International Institute of Information Technology (I²IT)

Servlet: A Server-side TechnologyInternational Institute of Information Technology (I²IT)

What Is Jenkins? Features and How It WorksInternational Institute of Information Technology (I²IT)

This document discusses Jenkins, an open source automation server that can be used to automate tasks related to building, testing, and deploying software. It describes how Jenkins can be installed via native packages, Docker, or by running its Java files. The document also explains what a Jenkins pipeline is and provides examples of declarative and scripted pipeline syntax to define build, test, and deploy stages. Finally, it discusses concepts like nodes, stages, and steps that are used in continuous development with Jenkins.

Cloud ComputingInternational Institute of Information Technology (I²IT)

Cloud computing enables ubiquitous and on-demand access to shared pools of configurable computing resources. It is composed of essential characteristics like rapid provisioning and release of resources with minimal management effort. There are three main service models - Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service (SaaS). The document also discusses the different types of cloud including public, private, and hybrid clouds. Using cloud computing provides advantages to enterprises like setting up a virtual office and saving costs compared to purchasing their own systems and equipment.

Hypothesis-TestingInternational Institute of Information Technology (I²IT)

Data Science, Big Data, Data AnalyticsInternational Institute of Information Technology (I²IT)

Types of Artificial Intelligence International Institute of Information Technology (I²IT)

The document discusses the different types of artificial intelligence. It describes memory-less AI, limited memory AI, theory of mind AI, and self-consciousness AI based on how closely they can simulate human intelligence. It also outlines narrow or weak AI, general or strong AI, and super AI based on the scope of tasks they can perform. Memory-less AI can respond to predefined inputs without learning, while limited memory AI can learn from experiences. Current research is focused on developing general AI that can mimic human intelligence and theory of mind AI that understands emotions and beliefs.

Difference Between AI(Artificial Intelligence), ML(Machine Learning), DL (Dee...International Institute of Information Technology (I²IT)

Sentiment Analysis in Machine LearningInternational Institute of Information Technology (I²IT)

What Is Cloud Computing?International Institute of Information Technology (I²IT)

Introduction To Design PatternInternational Institute of Information Technology (I²IT)

Importance of Theory of ComputationsInternational Institute of Information Technology (I²IT)

Java as Object Oriented Programming LanguageInternational Institute of Information Technology (I²IT)

What Is High Performance-Computing?International Institute of Information Technology (I²IT)

Data Visualization - How to connect Microsoft Forms to Power BIInternational Institute of Information Technology (I²IT)

Minimization of DFAInternational Institute of Information Technology (I²IT)

Understanding Natural Language ProcessingInternational Institute of Information Technology (I²IT)

What Is Smart Computing?International Institute of Information Technology (I²IT)

Professional Ethics & Etiquette: What Are They & How Do I Get Them?International Institute of Information Technology (I²IT)

Writing Skills: Importance of Writing SkillsInternational Institute of Information Technology (I²IT)

Professional Communication | Introducing Oneself International Institute of Information Technology (I²IT)

Servlet: A Server-side TechnologyInternational Institute of Information Technology (I²IT)

What Is Jenkins? Features and How It WorksInternational Institute of Information Technology (I²IT)

Cloud ComputingInternational Institute of Information Technology (I²IT)

Hypothesis-TestingInternational Institute of Information Technology (I²IT)

Data Science, Big Data, Data AnalyticsInternational Institute of Information Technology (I²IT)

Types of Artificial Intelligence International Institute of Information Technology (I²IT)

Difference Between AI(Artificial Intelligence), ML(Machine Learning), DL (Dee...International Institute of Information Technology (I²IT)

Sentiment Analysis in Machine LearningInternational Institute of Information Technology (I²IT)

What Is Cloud Computing?International Institute of Information Technology (I²IT)

Introduction To Design PatternInternational Institute of Information Technology (I²IT)

Importance of Theory of ComputationsInternational Institute of Information Technology (I²IT)

Java as Object Oriented Programming LanguageInternational Institute of Information Technology (I²IT)

What Is High Performance-Computing?International Institute of Information Technology (I²IT)

Data Visualization - How to connect Microsoft Forms to Power BIInternational Institute of Information Technology (I²IT)

Recently uploaded (20)

Supplier_PFMEA_Workshop_rev 22_04_27.pptxdariojaen1977

PPT on Grid resilience against Natural disasters.pptxmanesumit66

Video Games and Artificial-Realities.pptxHadiBadri1

Advanced Concrete Technology- Properties of ConcreteBharti Shinde

Air Filter Flat Sheet Media-Catalouge-Final.pdf FILTRATION ENGINEERING & CUNSULTANT

This presentation provides a detailed overview of air filter testing equipment, including its types, working principles, and industrial applications. Learn about key performance indicators such as filtration efficiency, pressure drop, and particulate holding capacity. The slides highlight standard testing methods (e.g., ISO 16890, EN 1822, ASHRAE 52.2), equipment configurations (such as aerosol generators, particle counters, and test ducts), and the role of automation and data logging in modern systems. Ideal for engineers, quality assurance professionals, and researchers involved in HVAC, automotive, cleanroom, or industrial filtration systems.

Department of Environment (DOE) Mix Design with Fly Ash.MdManikurRahman

Concrete Mix Design with Fly Ash by DOE Method. The Department of Environmental (DOE) approach to fly ash-based concrete mix design is covered in this study. The Department of Environment (DOE) method of mix design is a British method originally developed in the UK in the 1970s. It is widely used for concrete mix design, including mixes that incorporate supplementary cementitious materials (SCMs) such as fly ash. When using fly ash in concrete, the DOE method can be adapted to account for its properties and effects on workability, strength, and durability. Here's a step-by-step overview of how the DOE method is applied with fly ash.

Unit 6 Message Digest Message Digest Message DigestChatanBawankar

Salesforce Hackathon Fun Slide for EveryoneImtiazBinMohiuddin

Concept Learning - Find S Algorithm,Candidate Elimination AlgorithmGlobal Academy of Technology

Comprehensive Guide to Distribution Line DesignRadharaman48

The Comprehensive Guide to Distribution Line Design offers an in-depth overview of the key principles and best practices involved in designing electrical distribution lines. It covers essential aspects such as line routing, structural layout, pole placement, and coordination with terrain and infrastructure. The guide also explores the two main types of distribution systems Overhead and Underground distribution lines highlighting their construction methods, design considerations, and areas of application. It provides a clear comparison between overhead and underground systems in terms of installation, maintenance, reliability, safety, and visual impact. Additionally, it discusses various types of cables used in distribution networks, including their classifications based on voltage levels, insulation, and usage in either overhead or underground settings. Emphasizing safety, reliability, regulatory compliance, and environmental factors, this guide serves as a foundational resource for professionals and students looking to understand how distribution networks are designed to efficiently and securely deliver electricity from substations to consumers.

Internship_certificate_by_edunetfoundation.pdfprikshitgautam27

THE RISK ASSESSMENT AND TREATMENT APPROACH IN ORDER TO PROVIDE LAN SECURITY B...ijfcstjournal

Local Area Networks(LAN) at present become an important instrument for organizing of process and information communication in an organization. They provides important purposes such as association of large amount of data, hardware and software resources and expanding of optimum communications. Becase these network do work with valuable information, the problem of security providing is an important issue in organization. So, the stablishment of an information security management system(ISMS) in organization is significant. In this paper, we introduce ISMS and its implementation in LAN scop. The assets of LAN and threats and vulnerabilities of these assets are identified, the risks are evaluated and techniques to reduce them and at result security establishment of the network is expressed.

Software_Engineering_in_6_Hours_lyst1728638742594.pdfVanshMunjal7

1.2 Need of Object-Oriented Programming.pdfVikasNirgude2

Introduction to Machine Vision by CognexRicardoCunha203173

DIGITAL ELECTRONICS: UNIT-III SYNCHRONOUS SEQUENTIAL CIRCUITSSridhar191373

Latches, Flip flops – SR, JK, T, D, Master/Slave FF– operation and excitation tables, Triggering of FF, Analysis and design of clocked sequential circuits – Design - Moore/Mealy models, state minimization, state assignment, circuit implementation – Design of Counters- Ripple Counters, Synchronous Counter, Ring Counters, Shift registers, Universal Shift Register- HDL Models of Sequential Circuits.

Scilab Chemical Engineering application.pptxOmPandey85

This presentation explores the use of Scilab, a powerful open-source alternative to MATLAB, in solving key problems in chemical engineering. Developed during an academic internship, the project demonstrates how Scilab can be effectively applied for simulation, modeling, and optimization of various chemical processes. It covers mass and energy balance calculations for both steady and unsteady-state systems, including the use of differential equations to model dynamic behavior. The report also delves into heat transfer simulations, such as conduction and heat exchanger design, showcasing iterative solutions and energy conservation. In reaction engineering, Scilab is used to model batch reactors and compare performance metrics between plug flow and continuous stirred tank reactors. The presentation further includes fluid flow simulations using advection-diffusion models and the Navier-Stokes equation, helping visualize mixing and flow behavior. For separation processes, it offers distillation sensitivity analysis using Underwood’s and Gilliland’s correlations. Optimization techniques like gradient descent and genetic algorithms are applied to a plant-wide scenario to minimize energy consumption. Designed for students, educators, and engineers, this report highlights Scilab's capabilities as a cost-effective and versatile tool for chemical process modeling and control, making it an excellent resource for those seeking practical, open-source engineering solutions. By integrating real-world examples and detailed Scilab code, this presentation serves as a practical guide for anyone interested in chemical process simulation, computational modeling, and open-source software in engineering. Whether you're working on chemical reactor design, heat exchanger analysis, fluid dynamics, or process optimization, Scilab provides a reliable and flexible platform for performing numerical analysis and system simulations. This resource is particularly valuable for chemical engineering students, academic researchers, and professionals looking to reduce software costs while maintaining computational power. With keywords like chemical engineering simulation, Scilab tutorial, MATLAB alternative, and process optimization, this presentation is a go-to reference for mastering Scilab in the context of chemical process engineering.

Advanced Concrete Technology- Properties of AdmixturesBharti Shinde

[HIFLUX] High Pressure Tube Support Catalog 2025하이플럭스 / HIFLUX Co., Ltd.

Filters for Electromagnetic Compatibility ApplicationsMathias Magdowski

In this lecture, I explain the fundamentals of electromagnetic compatibility (EMC), the basic coupling model and coupling paths via cables, electric fields, magnetic fields and wave fields. We also look at electric vehicles as an example of systems with many conducted EMC problems due to power electronic devices such as rectifiers and inverters with non-linear components such as diodes and fast switching components such as MOSFETs or IGBTs. After a brief review of circuit analysis fundamentals and an experimental investigation of the frequency-dependent impedance of resistors, capacitors and inductors, we look at a simple low-pass filter. The input impedance from both sides as well as the transfer function are measured.

Supplier_PFMEA_Workshop_rev 22_04_27.pptxdariojaen1977

PPT on Grid resilience against Natural disasters.pptxmanesumit66

Video Games and Artificial-Realities.pptxHadiBadri1

Advanced Concrete Technology- Properties of ConcreteBharti Shinde

Air Filter Flat Sheet Media-Catalouge-Final.pdf FILTRATION ENGINEERING & CUNSULTANT

Department of Environment (DOE) Mix Design with Fly Ash.MdManikurRahman

Unit 6 Message Digest Message Digest Message DigestChatanBawankar

Salesforce Hackathon Fun Slide for EveryoneImtiazBinMohiuddin

Concept Learning - Find S Algorithm,Candidate Elimination AlgorithmGlobal Academy of Technology

Comprehensive Guide to Distribution Line DesignRadharaman48

Internship_certificate_by_edunetfoundation.pdfprikshitgautam27

THE RISK ASSESSMENT AND TREATMENT APPROACH IN ORDER TO PROVIDE LAN SECURITY B...ijfcstjournal

Software_Engineering_in_6_Hours_lyst1728638742594.pdfVanshMunjal7

1.2 Need of Object-Oriented Programming.pdfVikasNirgude2

Introduction to Machine Vision by CognexRicardoCunha203173

DIGITAL ELECTRONICS: UNIT-III SYNCHRONOUS SEQUENTIAL CIRCUITSSridhar191373

Scilab Chemical Engineering application.pptxOmPandey85

Advanced Concrete Technology- Properties of AdmixturesBharti Shinde

[HIFLUX] High Pressure Tube Support Catalog 2025하이플럭스 / HIFLUX Co., Ltd.

Filters for Electromagnetic Compatibility ApplicationsMathias Magdowski

PIC Microcontroller | ADC Interfacing

1. 1 PIC Microcontroller Prof. Ashvini Kulkarni Assistant Professor Department of Electronics & Telecommunication Hope Foundation’s International Institute of Information Technology, I²IT www.isquareit.edu.in

2.  Characteristics of ADC  PIC 18 ADC features  PIC 18 ADC control registers Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 2

3.  Analog signal is converted into a digital data that can be processed using a digital computer.  Types of ADC:  Slope and double-slope type  Flash type  Successive approximation Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 3

4.  Characteristics of ADC[2]: 1. Resolution:  ADC has n- bit resolution(where n=8,10,12,16,24 bits)  Higher the resolution smaller the step size  If ADC has 8 bit resolution means 2^8= 256(No. of steps)  Applied voltage is Vref=5v then 5/256=19.53 mv (step size) 2. Conversion time:  The time it takes for the converting analog input to digital output Vref:It is input voltage used for the reference voltage  Vref/no. of steps(Vref is responsible for step size) Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 4

5.  Characteristics of ADC: 3. Digital data output:  8 bit ADC, we have 8bit digital data output of D0 –D7  Dout=Vin/step size[2] Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 5

6.  Features of ADC 1) The ADC in PIC18F4550 is a successive approximation ADC with a resolution of 10 bits. 2) It has 10 input channels. Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 6

7. Configuring Registers Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] The PIC18 Microcontroller - The A/D converter has the following registers[1]: • A/D Control Register 0 (ADCON0) • A/D Control Register 1 (ADCON1) • A/D Control Register 2 (ADCON2) • A/D Result High Register (ADRESH) • A/D Result Low Register (ADRESL)

8. Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 8 Figure No. 1: Block diagram of ADC in PIC18f4550[1]

9.  Each port pin associated with the A/D converter can be configured as an analog input or as a digital I/O.  When the A/D conversion is complete, the result is loaded into the ADRESH:ADRESL registers,  the GO/DONE bit (ADCON0 register) is cleared and A/D Interrupt Flag bit, ADIF, is set. Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 9

10.  The analog reference voltage is software selectable to either the device’s positive and negative supply voltage (VDD and VSS) or the voltage level on the RA3/AN3/VREF+ and RA2/AN2/VREF-/CVREF pins. Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 10

11. 1. Configure the A/D module: Configure analog pins, voltage reference and digital I/O (ADCON1)  Select A/D input channel (ADCON0)  Select A/D acquisition time (ADCON2)  Select A/D conversion clock (ADCON2)  Turn on A/D module (ADCON0) 2. Configure A/D interrupt (if desired):  Clear ADIF bit  Set ADIE bit  Set GIE bit 3. Wait the required acquisition time (if required).  Start conversion  Set GO/DONE=1 bit in (ADCON0 register) Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 11

12. 5. Wait for A/D conversion to complete, by either:  Polling for the GO/DONE bit to be cleared OR Waiting for the A/D interrupt 6. Read A/D Result registers (ADRESH:ADRESL);  clear bit ADIF, if interrupt bit is set. 7. For next conversion, go to step 1 or step 2, as required. Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 12

13. [1] Microchip datasheet of PIC18F2455/2550/4455/4550 [2] Muhamad Ali Mazidi,Rolind D Mckinly,”PIC microcontroller and embedded systems”Pearson publication. Hope Foundation’s International Institute of Information Technology, I²IT, P-14 Rajiv Gandhi Infotech Park, Hinjawadi, Pune - 411 057 Tel - +91 20 22933441 / 2 / 3 | Website - www.isquareit.edu.in ; Email - [email protected] 13

14. For further information please contact Ashvini Kulkarni Department of Electronics & Telecommunication Hope Foundation’s International Institute of Information Technology, I²IT Hinjawadi, Pune – 411 057 Phone - +91 20 22933441 www.isquareit.edu.in | [email protected] | [email protected] 14

PIC Microcontroller | ADC Interfacing

Recommended

More Related Content

What's hot (20)

Similar to PIC Microcontroller | ADC Interfacing (20)

More from International Institute of Information Technology (I²IT) (20)

Recently uploaded (20)

PIC Microcontroller | ADC Interfacing