Presentation on home automation

PRESENTATIONPRESENTATION
ONON
HOME AUTOMATIONHOME AUTOMATION
USING ANDROID PHONEUSING ANDROID PHONE
OVER BLUETOOTHOVER BLUETOOTH

SUBMITTED
IN PARTIAL FULFILLMENT OF THE
REQUIREMENTS FOR THE AWARD OF THE DEGREE OF
BACHELOR OF TECHNOLOGY
IN
Electronics’ & Communication Engineering.
(Session 2012-2015)
Presented By:
Subhash Kumar Yadav Parveen Kumar
Pankaj Dheer Monika Saini

1. Introduction 1. Introduction
2. Project Modules 2. Project Modules

                        i. Hardware                        i. Hardware
                        ii. Software                        ii. Software

3. Block Diagram  3. Block Diagram
4. Components Required4. Components Required

5.Bluetooth Module  5.Bluetooth Module
CONTENT:

6.Relay6.Relay
7.Microcontroller-89S52.7.Microcontroller-89S52.
8.Remote.8.Remote.
9.Working9.Working
10.Screen Shots.10.Screen Shots.
11.Advantages11.Advantages
12.Applications.12.Applications.
13.Conclusion.13.Conclusion.

INTRODUCTION
There is an increasing demand for smart homes,
where appliances react automatically to changing
environmental conditions and can be easily
controlled through one common device.
This project presents a possible solution whereby
the user controls devices by using their existing
mobile phone ,where control is communicated to
the Microcontroller from a mobile phone through
its Bluetooth interface.

Home automation involves introducing a degree of
computerized or automatic control to certain electrical and
electronics system in a building.
These lighting, temperature control, etc.., this paper
demonstrate a simple home automation system which contains
a remote mobile host controller and several client module
(home appliances).
The client modules communicate with host controllers
through a wireless device such as a Bluetooth enabled mobile
phone, in this case, an android based smart phone.

Parts & Components Required
S.
No Component Name
Nos.
Required
1
HC-05 Bluetooth module
1
2
AT89S52 micro controller
IC 1
3 ULN2003 IC 3
4 5V relay 2
5
Crystal 12MHz or
11.0592MHz
1
6 1K Resistor 1
7
22µf or 10µf electrolyte
capacitor 2
8
30pf or 22pf ceramic
capacitor 2
9 10k resistor network 3
10 7805 IC 2
11 9V battery 2
12
220v to 6v-0-6v step down
transformer 1
13 1N4007 diode 3

Bluetooth Module:Bluetooth Module:
 Hc-06 is a Bluetooth Smart
module targeted for low-power
sensors and accessories.
 It integrates all features
required for a Bluetooth Smart
application.
 It is powered directly from a
standard mobile charger.
 In the lowest power sleep
mode it merely consumes 500
nA and will wake up within a
few hundred microseconds.

Why prefer Bluetooth??
It is preferable to use Bluetooth because nowadays people have their
smart phones with them all the time, since the smart phones have
Bluetooth facility in them, thus it's better to use Bluetooth rather
than using RF remotes or IR remotes. Have you ever seen people
carrying remotes???
Using Bluetooth has many of its own advantages :Using Bluetooth has many of its own advantages :
1.It's secure.1.It's secure.
2.Easy to use.2.Easy to use.
3.It works in short distance range(i.e. upto 10mtrs.)3.It works in short distance range(i.e. upto 10mtrs.)
4.Anyone can find free Bluetooth apps on android and many more.4.Anyone can find free Bluetooth apps on android and many more.

Relay :Relay :
 A relay is an electrically
operated switch.
 Relays are used where it
is necessary to control a
circuit by a low-power
signal.
 Relays protect electrical
circuits from overload or
faults.

MICROCONTROLLER-89S52MICROCONTROLLER-89S52
1.Compatible with MCS®-51 Products
2.8K Bytes of In-System Programmable (ISP) Flash Memory
3.Endurance: 10 k Write/Erase Cycles
4.4.0V to 5.5V Operating Range
5.Fully Static Operation: 0 Hz to 33 MHz
6.Three-level Program Memory Lock
7.256 x 8-bit Internal RAM
8.32 Programmable I/O Lines
9.Three 16-bit Timer/Counters
10.Eight Interrupt Sources
11.Full Duplex UART Serial Channel
12.Low-power Idle and Power-down Modes
13.Interrupt Recovery from Power-down Mode
14.Watchdog Timer
Dual Data Pointer
Power-off Flag
Fast Programming Time
Flexible ISP Programming (Byte and Page Mode)
Green (Pb/Halide-free) Packaging Option
F
E
A
T
U
R
E
S

Android has an
active community
of developers and
enthusiasts who use
the Android Open
Source
Project (AOSP)
source code to
develop and
distribute their own
modified versions
of the operating
system.

Control of electrical appliances through an application of
Automation in our Android Mobile

Presentation on home automation

Advantages :
The main advantage of “Home Automation
through Android Mobile” is that the “Physically
Challenged and Disabled People” .
Replace television, air conditioner etc., remotes for
sleep mode.
Smart Home.

Applications :
1. Home automation – This project can be used
to control various Home Appliances
2. We can control device from a long distance,
thus it gives ease of access.
3. Faster operation and efficient.
4. No need to carry separate remote or any other
controlling unit.

Conclusion :
Home Automation is undeniably a resource
which can make a home environment automated.
People can control their electrical devices via
these Home Automation devices and set up
controlling actions through Mobile.
In future this product may have high potential for
marketing.

Presentation on home automation

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Presentation on home automation (20)

Recently uploaded (20)

Presentation on home automation