Saniguard active---Durable,nonleaching antimicrobial for all surfaces
5 likes1,465 views
Saniguard-active is an EPA registered antimicrobial technology that inhibits the growth of harmful microorganisms, providing a long-lasting protective finish on various surfaces. Unlike traditional antimicrobials, it forms a molecular bond that disrupts the cell membranes of bacteria and fungi without losing effectiveness over time, thus preventing the rise of resistant strains. It is beneficial in cleanroom environments by significantly reducing microbial contamination and associated health risks, making it a cost-effective solution for maintaining hygiene and preventing damage in various settings.
![The following list outlines the bacteria, virus,
fungi, algae, molds, and yeasts
Saniguard-Active has been shown to be active
against and helps eliminate.
Gram Positive Bacteria
Bacillus sp. (vegetative cell) [5, 6, 11]
Clostridium difficule 25
Corynebacterium diptheriae 1, 13
Listeria monocytogenes 24, 25
Micrococcus lutea 5, 6, 11
Micrococcus sp. 2, 5, 15
Mycobacterium tuberculosis 14
Mycobacterium smegmatis 14
Propionibacterium acnes 5
Staphylococcus aureus 2, 3, 5, 6, 10, 11, 13, 24,
15, 21
Staphylococcus aureus (MRSA) 25
Staphylococcus epidermidis 2, 5, 6, 7, 11, 13, 14,
15
Streptococcus faecalis 2, 5, 6, 7, 11, 13, 14
Streptococcus mutans 5, 6, 7, 11
Streptococcus pneumonia 1
Streptococcus pyogenes 5, 6, 7, 11
SANIGUARD-Active Active Against:](https://image.slidesharecdn.com/saniguard-active-140403050826-phpapp02/85/Saniguard-active-Durable-nonleaching-antimicrobial-for-all-surfaces-36-320.jpg)
Saniguard active---Durable,nonleaching antimicrobial for all surfaces
- 2. Antimicrobial, Disinfectant, Biocide, Sterilant, Biostatic and Odor Eliminator It is patented and EPA registered to inhibit the growth of fungi and bacteria. Is based on advanced silane chemistry : the organo silane technology is proven to be very effective, following 30 years of development. Traditional antimicrobials provide short-term kill of microorganisms. Unlike disinfectants, sanitizers and bleaches, the water based Saniguard-Active forms a molecular bond to surface. The molecule disrupts the cell membranes of harmful fungi and bacteria, inhibiting, reducing and providing long-term, residual kill. It can produce a durable, non-migrating antimicrobial finish to a wide range of textiles. SANIGUARD-Active can form an invisible and durable micro-biostatic coating on a broad range of hard surfaces. The physical, rather than chemical, mode of action of SANIGUARD- Active does not affect normal skin flora, does not lose strength with use and does not promote adaptative organisms (super bugs)
- 3. Micro-oganisms susceptible to Saniguard-Active Antimicrobial Agent Bacteria (gram positive) Streptococcus aureus Streptococcus faecalis Bacillus subtilis Algae Cyanophyta (blue-green)oscillatoria Cyanophyta (blue-green) anabaena Chrysophyta (brown) Chlorophyta (green) Selenastrum gracile Chlorophyta (green)Protococcus Bacteria (gram negative) Samonella typhosa Samonella chloeraesius Escherichia coli Mycobacterium tuberculosis Pseudomonas aeruginosa Aerobacter aerogenes Fungi Aspergillus niger Aspergillus terreus Chaetonium globosum Aspergillus flarres Aspergillus verrucaria Pencillum funiculosm Pullularia pullulans Cephaldascus fragans Trichoderm sp. Madison P-42 Trichophyton interdigital Yeast Saccharomyces cerevisiae Candida albicans
- 4. Antimicrobial strategies in cleanroom environments with “Saniguard-Active” The cleanroom and cleanroom-garment industries are challenged by the presence of microorganisms and the negative effects they cause. Deterioration, defacement and odors are dramatic effects that can occur as a result of the microbial contamination of woven, nonwoven, composite fabrics, and building surfaces. These cleanroom elements act as “harbors” and transfer routes, offering ideal environments for medically significant microorganisms and those that cause problems in process equipment and products. The ability to make textiles and environmental surfaces resistant to microbial contamination has advantages in many applications and market segments. Cleanroom managers must possess a reaction plan for avoidance and control of airborne, human, and surface-sourced microbial contaminants. Strategies for control of microbes must include garments, beddings, linens, wipes, surgical fabrics, and other textiles used in cleanroom operations, construction materials and operating systems.
- 5. The term antimicrobial refers to a broad range of technologies that provide products and buildings with varying degrees of protection against microorganisms. This control reduces or eliminates the problems that microbes can cause, such as deterioration, staining, odor, product cross-contamination, and health concerns. Antimicrobials are very different in their chemical nature, mode of action, impact on people and the environment, in-plant-handling characteristics, durability on various substrates, costs, and how they interact with good and bad microorganisms. Antimicrobial strategies for bad organisms must include ensuring that non target organisms are not affected or that adaptation of microorganisms is not encouraged. Antimicrobials primarily function in two ways. The conventional leaching type of antimicrobial leaves the treated surface and chemically enters or reacts with the microorganism, acting as a poison. The unconventional bound antimicrobial stays affixed to the treated surface and, on a molecular scale, physically stabs and electrocutes the microorganism on contact to kill it. Like an arrow shot from a bow or bullet shot from a gun, leaching antimicrobials are often effective, but are depleted in the process of working, wasted in random misses, or are compromised by other chemicals. Antimicrobial strategies in cleanroom environments with “Saniguard-Active”
- 6. Mould, mildew, bacteria, fungi, yeasts. Visible and invisible, beneficial and deadly - but always present. The Saniguard-Active provides safe, effective solutions to microbial contamination in the indoor environment. Enviroperfect can assess and solve existing problems (even after flooding and other catastrophic events) or can effectively prevent problems from happening. The key is the unique Saniguard-Active Antimicrobial technology. In contrast to the conventional weapons you use in the unending battle with microbial contamination (sanitizers, disinfectants, bleach and biocides), it is odourless, effective, durable and professionally applied. Microorganisms, their body parts, metabolic products, and reproductive parts, cause multiple problems to building materials and furnishings. They are human irritants, sensitizers, toxic -response agents, causers of disease, and simple discomforting agents. Clearly, microorganisms are the most potent pollutants in the indoor environment, on our clothes, and on our furnishings. The medical impact of microorganisms on an individual depends on genetic heritage, general health, and the physical and mental stress factors in the person's life. Work or other psychological pressures, diet, weather patterns, and environmental pollutants, contribute to the severity of human reactions. For people with a predisposition for respiratory problems - the infirm, elderly, babies, people recuperating from illness, and those being treated with Antimicrobial strategies in cleanroom environments with “Saniguard-Active”
- 7. Dramatically reduce mould, mildew and bacteria levels on treated surfaces and in the indoor environment and keep low levels up to 2 years. Significantly reduce the need to replace water damaged carpeting, ceiling tiles, furnishings and building materials. Control growth of microbial contamination in areas which have been exposed to flooding or high moisture conditions. Control the odours, damage and deterioration typically caused by microbial growth. Lessen the risk of airborne and surface microbial contamination spreading throughout a building and triggering serious human health responses. Save you thousands of dollars in restoration costs after catastrophic events such as hurricanes, flooding or building failures.
- 8. If you exclude the problem buildings which have specific chemical problems like asbestos, radon, exhaust fumes, or infiltration of some toxic material and illness like Legionnaires' Disease, the human symptoms are remarkably consistent - headaches, sore eyes, congestion, sinus problems, sore throat, drowsiness. These symptoms are not identifiable to any single pollutant - either chemical or microbial. The logical conclusion is that the bulk of building problems result from human reaction to the total contaminated load in the building. Just as the human immune system provides resistance to disease only until it is overwhelmed by the combined bacterial and fungal insult level, it resists reaction to airborne contaminants only until it is overwhelmed by the total contaminant level
- 9. If the total contaminant level is significantly lowered, the so-called "sick building symptoms" tend to disappear. The rate of disappearance depends on the individual sensitivities of the inhabitants. This phenomenon is clearly seen when we compare a building treated with the Saniguard-Active vs. a building with the HVAC system modified to greatly increase the amount of "fresh air". The difference is that the saniguard-Active Solution removes the sources of contamination and lasts for a very long time, but the HVAC solution does nothing to eliminate the sources - consequently the problems are likely to return as microbial contamination continues to bloom. AND there is no comparison in the costs of the two solutions!
- 10. The active ingredient in the Saniguard-Active forms a colorless, odorless, positively charged polymer that molecularly bonds to the treated surface. You could think of it as a layer of electrically charged swords. When a microorganism comes in contact with the treated surface, the C-18 molecular sword punctures the cell membrane and the electrical charge shocks the cell. Since nothing is transferred to the now dead cell, the antimicrobial doesn't lose strength and the sword is ready for the next cell to contact it. Since Saniguard-Active chemically bonds to the application surfaces, it cannot diffuse or migrate once it has been professionally applied and has dried. It is uniquely different from most other antimicrobials in that it is only effective against single-celled organisms. Since it doesn't dissipate, it minimizes or eliminates the potential for micro-organisms to adapt or build up a tolerance and become resistant. It acts by rupturing the cell membrane - not by poisoning. Almost all other antimicrobials, sanitizers and disinfectants are designed to diffuse and be absorbed. Once absorbed, they act by poisoning or causing fatal mutations. As they diffuse, they lose strength and adaptation can and does occur. The durability of Saniguard-Active has been extensively tested. Treated surfaces will remain antimicrobially active for at least one year and up to three with follow-up service (we even guarantee that it will). Effectiveness in controlling airborne microbial pollution depends on the extent of the surfaces treated, the effectiveness of cleaning prior to treatment and the amount of growth which has occurred inside of materials before treatment. In fact, the Saniguard- Active treatment will normally last the life of the surface treated for surfaces not subject to wear.
- 11. Although no material is truly "non-toxic", Saniguard-Active Antimicrobial has a long and extraordinary record of safe use and application. It has been used in thousands of buildings - offices, schools, hospitals, nursing homes, industrial sites, labs, homes, etc. and has been registered for and regularly applied to carpeting, hosiery, undergarments, hospital gowns, surgical drapes, mattress covers and many other items. The Saniguard-Active is a precise application process custom designed to your building to achieve a complete surface treatment of contaminated materials or potential growth areas. The antimicrobial is normally spray applied in a dilute water solution. Since it only acts on contact with organisms, it is essential that a complete treatment be made. After flooding or other catastrophic situations, the program should be implemented as soon as cleaning has been completed and the drying process has begun. It is not necessary to have the area completely dry for effective treatment. Building areas close to flooded or water damaged sections should be treated immediately to deter the growth of fungi, bacteria and organisms which are encouraged by high humidity and which can cause serious human health problems.
- 12. The chemical bonding causes the treated surfaces themselves to become antimicrobially active --- not just surfaces from which an antimicrobial leaches or volatilizes. On direct contact with a microorganism, the technology works by disrupting (or rupturing) the cell membrane. This interrupts the normal life process and destroys the cell. The interruption is caused by two forces --- the long chain chemical component and the positively charged nitrogen component. The first can be compared to a "sword", the second to "electrocution". Like a "sword", the strength of Saniguard Active Antimicrobial is not used up or diminished when it acts. It can be used over and over again. Conventional antimicrobials are absorbed and are more like "bullets". With each use, some of the ammunition store is used up and effectiveness diminishes.
- 13. The unique bonding and killing capacity of Saniguard-Active, with its one-two punch, allows it to effectively control bacteria, fungi (mold, mildew and yeast), algae and other one celled organisms, as well as some viruses. Because it acts only on the membrane and does not lose strength over time, it doesn't create the conditions which allow microorganisms to adapt to its presence or develop resistance. As conventional antimicrobials gradually lose strength, new, resistant microorganisms can develop.
- 14. SANIGUARD-Active : Mode of action Part I : The first part of the molecule is the silane base. This silane base is the antimicrobial anchor. The antimicrobial is anchored by covalent bonds which are formed gradually through hydrolysis reactions that bond the antimicrobial permanently to almost any surfaces and allow for crosslinking and polymerisation with other molecules. Part II : The second part of the molecule is the centrally located positively charged nitrogen. It plays an important role in the active nature of the antimicrobial. Some membranes of microbes are negatively charged; when in close proximity, the microbes are drawn into the active surface of the antimicrobial and Part III : The third segment is the edge that leads to blow in the offending microbes. This long molecular chain acts like a sword that punctures the cell membranes of all microbes coming in contact with it.
- 15. When a microorganism comes in contact with the treated surface, the C-18 molecular sword punctures the cell membrane and the electrical charge shocks the cell. As the microbe is further drawn into the antimicrobial, it is electrocuted Since nothing is transferred to the now dead cell, the antimicrobial doesn’t lose strength and the sword is ready for the next cell to contact it. The active layer remains intact, efficacious and ready for the next cell that approaches.
- 16. Summary When the antimicrobial is bonded to the surface of an object, it is ready for defense. As the microbes come into contact with the “antimicrobial” surface, they are first punctured by the long molecular chain. The “positive-negative” attraction in between the positively charged nitrogen and the negative cell membrane draw the microorganism even further down on the sword. This modified cell can end the life of a microbe but the end point is the contact between the negative and the positive charges : the cell membrane is electrocuted and blown apart delivering inescapable kill In addition, since this process transfers nothing from the antimicrobial to the cell, the antimicrobial stands ready for the next “wave” and can continue to work at full strength and definitely.
- 17. Applied in a single stage of the wet finish process, the attachment of SANIGUARD- Active to surfaces involves two means. First and the most important is a very rapid process, which coats the substrate (fabric, fiber, etc), with the cationic species (physics sorption) one molecule deep. This is an ion exchange process by which the cation of the silane quaternary ammonium compound replaces protons from water or chemicals on the surface. The second mechanism is unique to materials such as silane quaternary ammonium compounds. In this case, the silanol allows for covalent bonding to receptive surfaces to occur (chemisorptions). This bonding is then made even more durable by the silanol functionality, which enables them to homopolymerize. After they have coated the surface in this manner, they become virtually irremovable, even on surfaces with which they cannot react covalently.
- 18. 3. Treated surface We have 2 reactions: 1. The product forms a molecular BOND to any fabric 2. Product forms a film : crosslinking of the product 1. Molecule used in SANIGUARD-Active 2. Surface view
- 19. For Soft Furnishing: The Saniguard-Active is applied in aqueous solution and can be inserted into almost any wet process during manufacturing at the mill. They can also be applied to finished goods. The antimicrobial is easily integrated into most jet, pad, and batch processes. The antimicrobial is cationic so it mixes well with other cationic and nonionic finishes (most softeners) and performs well in the same bath. For Hard surfaces: It can be treated on any hard surfaces by either fogging, wipe down, soaking or paint rolling on the target substrate. How is the treatment applied?
- 20. Conventional products penetrate living cells and kill by way of poisoning the organism or disrupting a vital life process. They are designed to act quickly and dissipate quickly. Most commercial antimicrobials used for treating surfaces do an adequate job of killing bacteria and fungi, although most have a limited range of effectiveness. The Saniguard-Active technology takes a totally unique approach. It provides an effective initial microbial kill when applied, but, unlike the conventional methods, it also provides long- term control of growth on treated surfaces, often for the life of that surface. The surface itself is modified to make it antimicrobially active. Almost all other treatments (antimicrobials, fungicides, insecticides, disinfectants, sanitizers, etc.) act by volatilising into the air or dissolving in a liquid. Then the active ingredient is dissipated rapidly or over a period of time - but all have a relatively short effective life. Once inside the organism, the material acts either by poisoning the organism or by promoting lethal mutation. Since saniguard-Active does not dissipate, the organism does not absorb it. Instead it acts by rupturing the cell wall of the organism - when the organism comes into DIRECT contact with the antimicrobial. In theory, saniguard-Active becomes a permanent part of any application surface and will continue to be fully effective permanently. In effect, it alters the application surface to make it permanently antimicrobial.
- 21. Classification Application Textiles Socks, underwear, dress-shirt, working uniform, formal dress Bedding & Night clothes (filling of a quilt, quilt cover, sheet, pajamas, blanket) Gloves, hat, handkerchief. Household goods Kitchen goods (towel, dish cloth, chopping board, water purifier, sponge) Bath room & toilet goods (bathtub, washbowl, bath mat, toothbrush, toilet fixtures, toilet seat cover) Glove (Kitchen, garden, agriculture & fishing, industry, skiing, golf), Toilet seat cover & mat Footwear Shoes, Slippers, shoe insole. Interior goods Carpet, curtain, upholstery. bedsheets Home electric appliances Vacuum cleaner, air cleaner, washing machine, telephone, air conditioner, headphones, floppy disk. Others Stationary : (Ball-point pen, file-cover, folder, a desk; a chair; a table, a bookcase; a hutch; shelves; an offce divider panel; file, cabinet; a fax machine; a telephone; a computer; a keyboard; a monitor; a computer mouse; a book; a lamp; a binderstapler; an offce stamp; and a desk pad.). Cards (telephone card, cash card).Watch-strap, belt. Hospitals Bedsheets, surgical nonwoven fabrics, wet wipes, filters(Filtration media like AC), hospital floorings, walls, operation theatre, ICU units, Mattress Pad, building
- 22. Uses Common Surfaces - Chairs, desks, counter tops, door handles, common contact surfaces, bathroom surfaces, toilets, sinks, and kitchen surfaces. Building Materials and Components - Wooden building materials, engineered lumber, plywood, flake board, oriented strand board, particle board, fibreboard, sheathing, decking or planking, wall board, vinyl siding, plastic siding, wood siding, concrete and concrete products, cinder blocks, brick, stone, ceiling tiles, architectural metal, louvers, vents, coping. Roofing Materials - Wood shingles, composite shingles, asphalt shingles, roofing granules, tiles, membranes, underlayment, wood shakes, felt, stone, concrete, asphalt coating, synthetic coating. Insulation Materials - Cellulose insulation, fibreglass insulation, panel insulation, rigid foam, expanded foam, moisture and wind fabric barriers. General Use Materials - Vinyl, plastic, wood, laminate, concrete, tile, stone, wallboard, gypsum board, plaster, EIFS wall systems, fibreglass, synthetic stucco, cinder block, brick, siding, wall paper and wall coverings, carpet, underlayment, mats. Fabric Materials - Acetates, acrylics, cotton, fibreglass, nylon, lycra, polyester, polyethylene, polyolefin’s, polypro
- 23. Applications On Textiles , Household goods, Stationeries , other industries etc Textiles: Socks, underwear, dress-shirt, working uniform, formal dress Bedding & Night clothes (filling of a quilt, quilt cover, sheet, pajamas, blanket) Gloves, hat, handkerchief. Furnishing Materials: As components of upholstered furniture, bedding, or carpeting, engineered fabrics have a unique role to play and strengthen their value with antimicrobial treatments. Housekeeping Goods: From wipes, mops, sponges to other cleaning supplies, engineered fabrics have utility and with an antimicrobial finish, serve a more durable and functional life. Garments: Engineered textiles bring strength, cleanability, breathability, insulation properties, barrier properties and antimicrobial treatments as valuable assets to many uses. These properties are all important in the great variety of garments used in medical care operations. Central Storeroom Materials: Bedcovers, linens, wraps, drapes, covers, and other textile or film-like materials can all be made and made better with engineered fabrics. The mix and value of properties of nonwoven, woven, and composite fabrics are a certain opportunity for engineered fabrics with antimicrobial treatments.
- 24. Office: The present invention generally relates to office furnishings such as: a desk; a chair; a table; a bookcase; a hutch; shelves; an office divider panel; a file cabinet; a fax machine; a telephone; a computer; a keyboard; a monitor; a computer mouse; a book; a lamp; a binder; a stapler; an office stamp; and a desk pad, etc. Construction & Concrete industry : Prevents deterioration due to fungi (mold and mildew), bacteria and algae. Prevents stains caused by fungi (mold and mildew), bacteria and algae. Prevents odors caused by fungi (mold and mildew), bacteria and algae. Prevents deposition of dust on the treated surfaces. Is easy to apply and more effective than traditional antimicrobial products. Roofing and envelope materials integrated with the engineered textiles can offer installation and performance properties that make them a preferred choice over any alternatives. Antimicrobial treatments enhance the value of these products. Applications On Textiles , Household goods, Stationeries , other industries etc
- 25. Paints Industry : Saniguard-Active approved to be used in wood , decks painting, latex indoor and outdoor paints and stains; woodstains, architectural paints; lacquer and maintenance coatings; films; laminates and finishes including alkyd, urethane, enamel, epoxy, siloxaline, amino resins, textile coatings, extrusion coatings, architectural coatings and overlays, anti-corrosion coatings fire- resistant coatings, aliphatic coatings, vinylester and polyester coatings, gel coatings, aminoresins, resins used as additive mixes for cement, epoxy laminating resins. Applications On Textiles , Household goods, Stationeries , other industries etc By incorporating SANIGUARD-Active in the Wood for wood furniture will inhibit deterioration and damage cause by these microorganisms for an extended period of time.
- 26. SANIGUARD-Active on FILTER Air filters: Air filters are part of the front-line for dealing with microbial problems in our modern buildings. Upgrading efficiency of air filters by adding a durable, safe and effective antimicrobial treatment can protect the air filter from abnormal fungal growth and improve the air quality of our buildings. With the proper choice of an antimicrobial agent applied to air filtration media, you can prohibit the growth of microbes on filter surfaces, reduce the number of microbial cells in the air stream, and reduce microbes in the indoor environment. Microbiological pollutants, as sources of irritants, sensitizers, discomforting products, toxicants and as disease causing agents, have enormous consequences on human productivity, comfort, health, and general well being. This fact clearly links microbes to the cause, effect, and remedy equation needed for establishing and maintaining indoor environmental quality. Air purification systems. Automobiles. Re-circulating air handling systems. Vacuum cleaner filters. Aquariums. Provides an invisible durable microbiostatic coating on most substrates from a water-based system. Inhibits the growth of odor causing bacteria. Prevents the growth of mold/mildew and algae. Is compatible with many processes and conditions, including pH from 3 to 10. Attacks malodors at their source to prevent decay. Can be incorporated into the manufacture of a wide variety of materials, providing extended life and usefulness to many products.
- 27. Hospitals continue to struggle to prevent dangerous infections caused by bacteria such as MRSA, and others. Although hospital staff wipes down parts of the hospital rooms with disinfectants, the dangerous bacteria remain present in hospitals. Areas that are sometimes overlooked in a hospital are furnishings within offices, as well as reception and waiting areas. Even offices outside of a hospital or healthcare facility are prone to harbor bacteria and therefore Would benefit from being disinfected. Most common disinfectants, however, only kill bacteria present on an article at the time the disinfectant is applied, and thus such treatment is ineffective in preventing bacteria from subsequently collecting on the article. SANIGUARD-Active in Hospital
- 28. The medical industry is challenged by the presence of microorganisms and the negative effects they cause. Deterioration, defacement and odors are all dramatic effects which occur from the microbial contamination of surfaces as varied as carpeting and medical non-woven fabrics. These surfaces can also act as a microbial "harbor," as most offer ideal environments for the proliferation of microorganisms that are harmful to buildings, textiles and humans. The ability to make surfaces resistant to microbial contamination has advantages in many applications and market segments. This is especially true in medical markets where many products have contributed a degree of aseptic sophistication beyond that required of consumer products. Textiles (wovens, nonwovens, and composite fabrics), soft goods, equipment, and indoor hard surfaces used in a medical environment have unique microbial problems and their control is a complex chemical, physical, and microbiological task. The microbiological integrity of medical textiles and surfaces has been the object of numerous studies ranging from the sterilization of nonwovens to the evaluation of the barrier properties of engineered fabric. Test data generated generally support the fact that these materials contribute positively to the reduction of microorganisms in the medical environment. This contribution has been part of the medical community’s awareness of the benefits of and the actions aimed at improving the hygienic nature of their environment as they take steps towards asepsis. SANIGUARD-Active in Hospital
- 29. Mold spores are always in the air ready to colonize upon a surface and grow in mass numbers. It can grow comfortably in temperatures from 0 to 100 degrees Fahrenheit. In lower temperatures mold can become dormant - but still survive. Sensitivity to mold is a significant cause of allergic diseases. These include allergic asthma, allergic rhinitis, bronchopulmonary mycoses, sinusitis hypersensitivity and pneumonitis. Black Mold can cause serious asthma attacks and studies have linked mold to the tripling asthma rate over the past 20 years. The active ingredient in saniguard-Active forms a colorless, odorless, positively charged polymer, which chemically bonds to the treated surface. When a microorganism comes in contact with the treated surface, the quaternary amine sword punctures the cell membrane and the electrical charge shocks the cell. Because nothing is transferred to the now dead cell, the antimicrobial doesn’t lose strength and the sword is ready for the next cell to contact it. SANIGUARD-Active in Hospital
- 30. A wide array of uses has led such materials into end uses where microbiological problems are no longer simply questions of bio-deterioration. The problems caused by microorganisms in these uses have extended the needs of antimicrobial treatments to controlling organisms that cause unsightly staining, odors, and reduction of organisms such that the fabrics are not considered harbors or transmission substrates for infectious organisms. In order to understand microorganisms and their impact on medical materials, we must understand the uses and abuses of these materials. Just as the end-use is different for each article, the potential for microbial contamination and the ability to control this contamination are very different. Specific fabrics are designed for different end-uses. The Saniguard-Active treatment on woven and nonwoven medical goods, carpeting, textile building materials, and as a broadcast treatment throughout the hospitals has been laboratory and field tested on a wide variety of materials and has proven utility as a broad spectrum antimicrobial. SANIGUARD-Active in Hospital
- 31. Antimicrobial Surface with saniguard-Active: An antimicrobial surface contains an antimicrobial that inhibits or reduces the ability of microorganism to grow on the surface of a material. Such surfaces are becoming more widely investigated for possible use in various settings including clinics, industry, and even the home. he most common and most important use of antimicrobial coatings has been in the healthcare setting for sterilization of medical devices to prevent hospital associated infections. In addition to medical devices, linens and clothing can provide a suitable environment for many bacteria, fungi , and viruses to grow when in contact with the human body which allows for the transmission of infectious disease Viral Inhibitors Viruses are mainly spread from person to person through airborne droplets produced while coughing or sneezing. However, the viruses can also be transmitted when a person touches respiratory droplets settled on an object or surface. It is during this stage that an antiviral surface could play the biggest role in cutting down on the spread of a virus. SANIGUARD-Active in Hospital
- 32. SANIGUARD-Active in Hospital Surgical/Medical Nonwovens: Clinical studies have shown that nonwoven fabrics are superior to woven fabrics in control of postoperative infections. These findings have led to major acceptance of nonwovens in the health care industry. In the U.S.A. a variety of the surgical nonwovens being produced are antimicrobial agents treated to provide an even greater reduction of risk of postoperative infection. Products being marketed include surgical drapes, instrument wraps, Mayo stand covers, and surgical packs. Products with the added antimicrobial treatment are finding excellent acceptance by the medical community. Saniguard-Active antimicrobial agent treated fabrics show that microorganisms, which contact the surface, are rapidly killed. In the surgical arena, contact of the treated nonwoven with body and irrigation fluids is a frequent occurrence. Saniguard-Active treated surface maintains antimicrobial activity against potentially pathogenic microorganisms in the presence of body and irrigation fluids. In the hospital environment concerns relating to adaptation of microorganisms to antimicrobial agents have resulted in routine changes in sanitizer/disinfectant agents by the infection control staff. This is done to reduce the potential for adaptation. Fabrics treated with Saniguard-Active have not shown the potential for adaptation Added performance and value have also been shown on saniguard-Active treated bandages, sponges, surgical masks, and gowns. Benefits of reduced infectious organisms and a more hygienic surface are clearly realized.
- 33. Mattress Pad: Microbial odors are associated with mattress pads as a result of the degradation of perspiration, dead skin and organic matter. These problems are persistent because laundering of the mattress pad is done less frequently than the sheeting or other bedding materials. The major organisms associated with mattress pads are the fungal organisms, but bacteria may cause problems under special conditions. Composition of the mattress pads consists of a mixture of woven and nonwoven fabrics. Testing both the nonwoven and woven fabrics is required to ensure performance and wash durability. Saniguard-Active treated Mattress pad can overcome the said problem. SANIGUARD-Active in Hospital
- 34. Gram Negative Bacteria Acinetobacter calcoaceticus 2, 5, 6, 11, 14, 15 Aeromonas hydrophilia 5, 6, 11 Citrobacter deversus 5, 6, 11 Citrobacter freundi 5, 6, 11 Enterobacter aerogenes 5, 6, 7, 11 Enterobacter aglomerans 2, 5, 14, 15 Enterobacter cloacae 5, 6, 7, 11 Enterococcus 10 Escherichia coli 1, 2, 3, 5, 6, 7, 10, 11, 13, 14 Klebsiella oxytoca 5, 6, 11, 14 Klebsiella pneumoniae 3, 5, 6, 7, 9, 10, 11, 13, 14 Klebsiella terriena 19 Legionella pneumophila 1 Morganella morganii 5, 6, 7, 11 Proteus mirabilis 5, 6, 7, 11 Proteus vulgaris 5, 6, 7, 11 Pseudomonas aeruginosa 2, 3, 5, 6, 7, 11, 13, 14 Pseudomonas fluorscens 5, 6, 7, 10, 11 Salmonella cholera suis 5, 6, 7, 11, 14 Salmonella typhi 5, 6, 7, 11, 14 Salmonella typhimunium 1, 5, 6, 7, 11 Serratia liquifaciens 5, 6, 7, 11 Serratia marcescens 5, 6, 7, 11 Xanthomonas campestris 5, 6, 7, 11 SANIGUARD-Active Active Against:
- 35. Viruses Adenovirus Type II & IV 17, 18, 21 Bovine Adenovirus Type I & IV 17, 18, 21 Feline pneumonitis 21 Herpes Simplex Type I 16, 17, 18 Herpes Simplex Type II 21 HIV-1 (AIDS) 21 Influenza A2 (Aichi) 17, 18, 21 Influenza A2 (Asian) 17, 18 Influenza B 17, 18 Mumps 17, 18 Parinfluenza (Sendai) 21 Rous Sarcoma 17, 18 Reovirus Type I 17, 18 Simian Virus 40 17, 18 Vaccinia 17, 18 MS2 19 PRD1 19 SANIGUARD-Active Active Against:
- 36. The following list outlines the bacteria, virus, fungi, algae, molds, and yeasts Saniguard-Active has been shown to be active against and helps eliminate. Gram Positive Bacteria Bacillus sp. (vegetative cell) [5, 6, 11] Clostridium difficule 25 Corynebacterium diptheriae 1, 13 Listeria monocytogenes 24, 25 Micrococcus lutea 5, 6, 11 Micrococcus sp. 2, 5, 15 Mycobacterium tuberculosis 14 Mycobacterium smegmatis 14 Propionibacterium acnes 5 Staphylococcus aureus 2, 3, 5, 6, 10, 11, 13, 24, 15, 21 Staphylococcus aureus (MRSA) 25 Staphylococcus epidermidis 2, 5, 6, 7, 11, 13, 14, 15 Streptococcus faecalis 2, 5, 6, 7, 11, 13, 14 Streptococcus mutans 5, 6, 7, 11 Streptococcus pneumonia 1 Streptococcus pyogenes 5, 6, 7, 11 SANIGUARD-Active Active Against:
- 37. Fungi, Algae, Mold, Yeast, Spores Alterania alternate 8,12 Aphanizomenon sp. 22 Aspergillus flavus 2, 5, 6, 7, 11, 14 Aspergillus niger 2, 5, 6, 7, 8, 11, 12, 13, 14 Aspergillus sydowi 5, 6, 7, 11 Aspergillus terreus 5, 6, 7, 11, 14 Aspergillus versicolor 2, 5, 6, 7, 11 Aspergillus verrucaria 14 Aureobasidium pullans 5, 6, 7, 8, 11, 12 Candida albicans 1, 2, 5, 6, 7, 14 Candida pseudotropocalis 5, 6, 7, 11 Chaetomium globsum 1 Cladosporium cladosporioides 8, 12 Chlorella vulgaris 19 Dreschslera australiensis 8,12 Epidermophyton sp. 9 Gliomastix cerealis 8, 12 Gloeophyllum trabeum 5, 6, 7, 11 Microsporum sp. 9 Microsporum audouinii 21 SANIGUARD-Active Active Against:
- 38. Monilia grisea 8, 12 Oscillatoria 20 Penicillium chrysogenum 5, 6, 7, 11 Pencillium commune 8, 12 Penicillium funiculosum 1, 2, 5, 6, 7, 11, 14 Penicillium pinophilium 5, 6, 7, 11 Penicillium variable 5, 6, 7, 11, 14 Phoma fimeti 8, 12 Pithomyces chartarum 8, 12 Poria placenta 5, 6, 7, 11 Scenedesmus 20 Saccharonyces cerevisiae 5, 6, 7, 11, 13, 14 Scolecobasidium humicola 8, 12 Selenastrum sp. 22 Trichoderma viride 5, 6, 7, 11 Trichophyton interdigitale 2, 14 Trichophyton maidson 14 Trichophyton mentogrophytes 5, 6, 7, 9, 11 Trichophyton sp. 9 Protozoa Parasites Cryptosporidium parvum (oocysts) 19 SANIGUARD-Active Active Against:
- 39. Resistance testing: Antimicrobial resistance was evaluated as per AATCC 100 Antifungal Resistance was evaluated using AATCC 30 Durability study-AATCC 135 Product Conc g/l S Aureus % Reduction E Coli % Reduction Saniguard- Active Initial 10wash 20 wash Initial 10wash 20 wash 20 98 90 68 94 92 65 30 100 91.56 87.32 99 93.5 85.07 40 100 94.23 90.10 99 94.46 88.35 AATCC 100 Test on Cotton fabric with Saniguard-Active by padding: AATCC 100 Test on Cotton fabric with Saniguard-Active by exhaust: Product Conc % owf S Aureus % Reduction E Coli % Reduction Saniguard- Active Initial 10wash 20 wash Initial 10wash 20 wash 0.5 98 92 80.37 98 90 72.72 1.0 100 94 85.45 99 91.87 80.34 2.0 100 95.56 87.32 99 93.5 85.07 3.0 100 96.23 90.10 99 94.46 88.35
- 40. Sample description Rating/Zone of Inhibition Cotton fabric treated-50g/l of Saniguard- Active 0 The percentage of surface growth of Aspergillus Nigar is rated as follows: Rating No growth:0 Trace of Growth(<10%) : 1 Light Growth(10-35%) : 2 Medium Growth(30-60%) : 3 Heavy Growth(60% to complete coverage) : 4 Antifungal resistance with Aspergillus Nigar on cotton by pad application: Visual / Microscopic Assessment report
- 41. Uses LN Chemical antimicrobials products were designed for applications that demand high levels of prevention of Mold & Mildew including: Wood Furniture Industrial Building Homes & Apartments Long-term Care Facilities Hotels & Motels Offices & Conference Centers Supermarkets & Restaurants Food Processing Centers Hospitals & Doctors clinics Government Buildings Laboratories & Research Centers School & other Public Buildings Airports & Transportation Centers Commercial & Private Kitchens Public & Private Washrooms
- 42. OFFICE ADDRESS :- 403, “Antariksh”, Makwana Road, Marol Naka, Andheri (E), Mumbai – 400 059 Tel.- 91- 22- 4221 6789 (30 Lines) 91- 22- 6692 4112 Fax -91-22- 2836 6434 FACTORY ADDRESS :- D- 14 /10, T.T.C. M.I.D.C Industrial area, Turbhe , P.O. K.U.Bazar, Navi Mumbai – 400 705 Tel.-91- 22- 4141 9899 (30 Lines) Fax -91- 22- 4141 9888 Email ID – [email protected] [email protected]