Sap new gl configuration

SAP New GL Configuration Page 2 of 282 www.sapficoconsultant.com
© 2007 sapficoconsultant.com All rights reserved. No part of thismaterial
should be reproduced or transmitted in any form, or by any means, electronic
or mechanical including photocopying, recording or by any information
storage retrieval system without permission in writing from
www.sapficoconsultant.com
“SAP” is a trademark of SAP AG, Neurottstrasse 16, 69190 Walldorf,
Germany.
SAP AG is not the publisher of thismaterial and is not responsible for it under
any aspect.
Warning and Disclaimer
This productis sold as is, without warranty of any kind, either express or implied.
While every precaution has been taken in the preparation of thismaterial,
www.sapficoconsultant.com assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the
information or instructions contained herein. It is further stated that the publisher
is not responsible for any damage or loss to your data or your equipment that
results directly or indirectly from your use of this product.

TABLE OF CONTENTS
INTRODUCTION.........................................................................................................5
1 Creating company code.....................................................................................7
2 Ledgers (New).................................................................................................. 12
2.1.1 Ledger.................................................................................................. 12
2.1.1.1 Define Ledgers for General Ledger Accounting..................... 12
2.1.1.2 Define Currencies of Leading Ledger...................................... 16
2.1.1.3 Define and Activate Non-Leading Ledgers............................. 19
2.1.1.4 Assign Scenarios and Customer Fields to Ledgers .............. 22
2.1.1.5 Define Ledger Group.................................................................. 27
2.1.1.6 Activate New General Ledger Accounting.............................. 30
2.1.1.7 Maintain Fiscal Year Variant..................................................... 32
2.1.1.8 Assign Company Code to a Fiscal Year Variant.................... 33
2.1.1.9 Define Posting period Variant ................................................... 35
2.1.1.10 Assign Posting period Variant to Company code................. 36
2.1.1.11 Open and Close Posting Periods ............................................ 38
2.1.2 Parallel Accounting ............................................................................ 41
2.1.2.1 Define Accounting Principles .................................................... 41
2.1.2.2 Assign Accounting Principle to Ledger Groups...................... 42
2.1.3 Real-Time Integration of Controlling with Financial Accounting. 42
2.1.3.1 Define Variants for Real-Time Integration............................... 42
2.1.3.2 Assign Variants for Real-Time Integration to Company Codes
....................................................................................................... 43
2.1.3.3 Define Account Determination for Real-Time Integration..... 44
3 Global Parameters for Company Code......................................................... 48
3.1.1 Enter Global Parameters................................................................... 48
4 Document.......................................................................................................... 50
4.1 Documents in Entry View ......................................................................... 50
4.1.1 Define Document Number Ranges for Entry View (FBN1)......... 50
4.1.2 Copy document number ranges to fiscal year (OBH2) ................ 53
4.1.3 Define Document Types for Entry View.......................................... 55
4.2 Documents in General Ledger View ....................................................... 61
4.2.1 Define Document Number Ranges for General Ledger View
(FAGL_DOCNR)............................................................................................... 61
4.2.2 Define Document Types for Entry View in a Ledger..................... 66
4.2.3 Define Document Types for General Ledger View ....................... 69
5 Define Field Status Variants ........................................................................... 73
6 Assign Company Code to Field Status Variants ......................................... 76
7 Define Tolerance Groups for Employees..................................................... 77
8 Assign Users to Tolerance Groups ............................................................... 81
9 Define Company............................................................................................... 83
10 Assign company code to company............................................................ 84
11 Create Chart of accounts ............................................................................ 85
12 Assign Company code to Chart of accounts............................................ 87
13 Define Account Group................................................................................. 88
14 Define Retained Earnings Account ........................................................... 90
15 Create GL account in Chart of accounts and company code ............... 92
16 Delete G/L Account (OBR2).....................................................................105
17 Delete Chart of Accounts (OBY8)............................................................107

18 Create Additional sort keys (OBY8)........................................................109
19 Document splitting......................................................................................111
19.1.1 Classify G/L Accounts for Document Splitting .........................114
19.1.2 Classify Document Types for Document Splitting...................118
19.1.3 Define Zero-Balance Clearing Account.....................................122
19.1.4 Define Document Splitting Characteristics for General Ledger
Accounting.......................................................................................................125
19.1.5 Edit Constants for Nonassigned Processes .............................127
19.1.6 Activate Document Splitting........................................................129
20 Define Segment..........................................................................................131
21 Define Profit Center...................................................................................133
22 Assign Default Profit Center to Accounts...............................................140
23 Define Translation Ratios for CurrencyTranslation..............................142
24 Enter Exchange Rates...............................................................................145
25 Define Worklist for Exchange Rate Entry...............................................146
26 Assign Exchange Rate to the Worklist....................................................147
27 DEFINING VALIDATION & SUBSTITUTION ........................................148
27.1 Define Validations for Posting............................................................148
27.2 Define Substitution in Accounting Documents (OBBH) .................162
28 TAX SETTINGS SALES / PURCHASE CONFIGURATION ...............172
28.1 Check Calculation Procedure.............................................................172
28.2 Assign Country to Calculation Procedure ........................................176
28.3 Define Tax Codes for Sales and Purchases (FTXP)......................177
28.4 Assign Company Code to Document Date for Tax Determination
191
28.5 Specify Base Amount..........................................................................192
28.6 Define Tax Accounts (OB40) .............................................................193
28.7 Assign Tax Codes for Non-Taxable Transactions ..........................197
29 Configuration for GL Automatic clearing: -.............................................198
29.1 Automatic Clearing...............................................................................198
29.2 Define Tolerance Groups for G/L Accounts.....................................199
29.3 Assigning accounts for GL Clearing Differences ............................201
30 Configuration for Foreign currency Valuation ........................................202
30.1 Define Valuation methods...................................................................202
30.2 Define Valuation Areas .......................................................................208
30.3 Check Assignment of Accounting Principle to Ledger Group.......209
30.4 Assign Valuation Areas and Accounting Principles........................210
30.5 Prepare Automatic Postings for Foreign Currency Valuation.......212
31 Configuration for regrouping postings.....................................................220
31.1 Define Adjustment Accounts for GR/IR clearing .............................220
32 Allocation .....................................................................................................224
32.1 Define Field Usage for Distribution ...................................................224
32.2 Define Field Usage for Assessment..................................................227
33 Creating Balance sheet and Profit and Loss account..........................229
33.1 Define Financial Statement Version (FSV) ......................................229
34 FI Integration with other modules ............................................................250
34.1 Integration with Materials Management ...........................................250
34.2 Integration with Sales and Distribution .............................................274
35 Deactivate Update of Classic General Ledger (GLT0).........................281
36 Set Company Code to Productive ...........................................................282

INTRODUCTION
This material is applicable for SAP ECC 5and ECC 6 version.
SAP has introduced a new concept called as SAP New GL structure.
Let us understand this concept of SAP New GL structure and its use.
Typically in SAP you can depict parallel accounting. Which means you can
carry out valuations and closing operations for a company code according to
local accounting principle and a second accounting principle (parallel) i.e. the
group accounting principle.
Till version 4.7 you could carry out the parallel accounting only by using
additional accounts.
Certain GL accounts are common between 2 the accounting areas.
Certain GL accounts applicable only for local reporting
Certain GL accounts applicable only for group reporting.
This kind of a set up requires 2 retained earnings accounts.
The disadvantage of this set ups is lot of GL accounts are required and
sometimes reconciliations become difficult.
To do away with the above approach SAP has now introduced the SAP New
GL structure. In this approach parallel accounting is depicted using an
additional ledger.
The data for one accounting principle is stored in the general ledger. This
ledger is known as the Leading ledger or Leading valuation view.
For each additional (parallel) accounting principle, you create an additional
ledger
The advantages of this approach are:-
1) You do not have to create any additional G/L accounts
2) You manage a separate ledger for each accounting principle
3) You can use the standard reporting functions to create a financial
statement
4) You can have different fiscal year variants attached to each of the
additional ledger.
5) You can make manual postings to any of the additional ledgers.

Configuration Scenario:
A Grp of companies (Parent company) is a multinational company with
companies across the world with base in Germany. The company has
decided to implement SAP for its subsidiary GLtd located in India. A Grp of
companies have to use the common chart of accounts. The currency in India
is INR. The Parent company wants the accounts to be prepared based on
Calendar year January to December. The Financial reporting should be in
EURO.
G Ltd has a local reporting requirement under the companies act
G Ltd also has a tax requirement to prepare it Accounts based on accounting
period April to March.
Based on the above requirements we need to configure the following using
the SAP New GL structure:-
Create company code 9101 – G Ltd.
The company code currency– INR
Parallel currencies to be implemented – EURO
Common chart of accounts – YCCA
Ledger 0L (leading valuation view) reporting period – Jan to December for
group reporting
Ledger Y1 (additional ledger) for local reporting under the companies act.
Ledger Y2 (additional ledger) for local tax reporting period (April to March)

1 Creating company code
Company code is the basic organizational unit in FI (Financial accounting) for
which a balance sheet and profit & loss account can be drawn. We create
company code 9101 (G Ltd.) which is located in country India.
For doing the configuration we use the following path on the SAP application
screen:-
SAP Menu à Tools à Customizing à IMG à SPRO - Execute Project à
Configuration for all the modules will be done here. The above path will
not be referred henceforth; we will directly refer to the IMG node.
SAP Customizing Implementation Guide à Enterprise Structure à Definition
à Financial Accounting à Edit, Copy, Delete, Check Company Code
Double click on EditCompany Code
data

By selecting the second option Edit Company Code data you have to
manually configure all the subsequent assignments.
By selecting the first option all the configuration and tables get copied
automatically along with assignments. This option should be selected in case
of rollouts.
In the Copy option you need to click on to copy a company code from an
existing company code. You can copy from existing company code delivered
by SAP.
You can select a four-character alpha-numeric key as the company code key.
This key identifies the company code and must be entered when posting
business transactions or creating company code-specific master data, for
example.
We will cover the FI configuration from scratch and not copying
configuration from an existing company code.

Click on and update the following fields:
The company code should be always kept numeric.
Country: The country where company code is located and the balance sheet
and income statement which will be prepared according to that country law.
Here the company is located in India so, we have selected the country id IN
(INDIA).
Currency: It is the local reporting currency of the country. In this case it is INR
(Indian rupees) since the company is located in India.
Click on Address and update the following fields

Click
Click to save entry.
Thus company code 9101 is created in SAP.

2 Ledgers (New)
2.1.1 Ledger
2.1.1.1 Define Ledgers for General Ledger Accounting
You define the ledgers that you use in General Ledger Accounting. The
ledgers are based on a totals table. SAP recommends using the delivered
standard totals table FAGLFLEXT.
The following types of ledgers are available:
Leading Ledger
The leading ledger is based on the same accounting principle as that of the
consolidated financial statement. It is integrated with all subsidiary ledgers
and is updated in all company codes. You must designate one ledger as the
leading ledger.
In each company code, the leading ledger automatically receives the settings
that apply to that company code: the currencies, the fiscal year variant, and
the variant of the posting periods.
In our scenario the group reporting is handled by the Leading Ledger.
Non-Leading Ledger
The non-leading ledgers are parallel ledgers to the leading ledger. They can
be based for example on local accounting principles
You must activate a non-leading ledger by company code.
For each ledger that you create, a ledger group of the same name is
automatically created.
In our scenario the local reporting is handled by the Non- leading ledger.
IMG à Financial Accounting (New) à Financial Accounting Global Settings
(New) à Ledgers à Ledger à Define Ledgers for General Ledger
Accounting

0L is the Leading Ledger.
Click on
Update the following:-
Click on

Click

2.1.1.2 Define Currencies of Leading Ledger
(New)à Ledgers à Ledgerà Define Currencies of Leading Ledger
Here you specify the currencies to be applied in the leading ledger. You can
make the following settings for each company code
Click on
Click

Now update the following:-
Click on

2.1.1.3 Define and Activate Non-Leading Ledgers
(New)à Ledgers à Ledgerà Define and Activate Non-Leading Ledgers
Here you make the following settings for the non-leading ledgers for each
company code:
• You activate the non-leading ledgers in the company code.
• You can define additional currencies beyond that of the leading ledger.
The first currency of a non-leading ledger is always the currency of the
leading ledger (and hence that of the company code). For the second
and third currencies of a non-leading ledger, you can only use currency
types that you have specified for the leading ledger.
• You can define a fiscal year variant that differs from that of the leading
ledger. If you do not enter a fiscal year variant, the fiscal year variant of
the company code is used automatically.
• You can specify a variant of the posting periods.

Click on
Click on
Click
Now update the following:-

Click on
Take a drop down in the field FV (Fiscal year variant)
You can even assign a different posting period variant to this ledger

Click on
2.1.1.4 Assign Scenarios and Customer Fields to Ledgers
(New)à Ledgers à Ledgerà Assign Scenarios and Customer Fields to
Ledgers
In this IMG activity, you assign the following to your ledgers:
Scenarios
This determines what fields in a ledger are updated when it receives posting
from other application components.
Custom Fields
You can add custom fields (that you have already defined) to the ledger.
Versions
This enables you to make general version settings for the ledger that depend
on the fiscal year. In the versions, you specify whether actual data is
recorded, whether manual planning is allowed, and whether planning
integration with Controlling is activated.

Select
Click

Click

Click
Click on
Click on
Click

Click
Select
Click
Click on
Click on

To assign Profit center update you need to have profit center module active.
Click
Select
Click
Click on
Click on
2.1.1.5 Define Ledger Group
(New)à Ledgers à Ledgerà Define Ledger Group
Here you define ledger groups. A ledger group is a combination of ledgers for
the purpose of applying the functions and processes of general ledger
accounting to the group as a whole.

When posting, for example, you can restrict the update of individual postings
to a ledger group so that the system only posts to the ledgers in that group.
You can combine any number of ledgers in a ledger group. In this way, you
simplify the tasks in the individual functions of General Ledger Accounting.
When a ledger is created, the system automatically generates a ledger group
with the same name. In this way, you can also post data to an individual
ledger or access it when using functions where you can only enter a ledger
group and not ledgers.
You can change the name of the ledger group that was taken from the ledger.
You only have to create those ledger groups in which you want to combine
several ledgers for joint processing in a function.
You do not need to create a ledger group for all ledgers because the
system automatically posts to all ledgers when you do not enter a ledger
group in a function.
Representative Ledger of a Ledger Group
The system uses the representative ledger of a ledger group to determine the
posting period and to check whether the posting period is open. If the posting
period for the representative ledger is open, the system posts in all ledgers of
the group, even if the posting period of the non-representative ledgers is
closed. Each ledger group must have exactly one representative ledger:
If the ledger group has a leading ledger, the leading ledger must always be
identified as the representative ledger.
If the ledger group does not have a leading ledger, you must designate one of
the ledgers as the representative ledger. If the ledger group has only one
ledger, this ledger is then the representative ledger. If the ledger group has
more than one ledger, the system checks during posting whether the
representative ledger was selected correctly. This check is based on the fiscal
year variant of the company code:
We do not want to group the ledgers, therefore we do not do any
configuration here.

Select
Double click

Select Y1
Double click
Similarly you can check Y2
2.1.1.6 Activate New General Ledger Accounting
IMG à Financial Accountingà Financial Accounting Global Settings à
Activate New General Ledger Accounting (FAGL_ACTIVATION)
By activating New General Ledger Accounting, you achieve the following:
1) The functions for new General Ledger Accounting become available.
2) In the SAP Reference IMG, the previous Financial Accounting menu is
replaced by the Financial Accounting (New) menu. Under Financial
Accounting Global Settings (New) and General Ledger (New), you can
make the settings for New General Ledger Accounting.
3) You activate the tables of new General Ledger Accounting so that your
posting data is written to them.
If you already use classic General Ledger Accounting in your production
system, you need to perform the migration of this data before you activate

Sap new gl configuration

Recommended

More Related Content

What's hot (20)

Viewers also liked (14)

Similar to Sap new gl configuration (20)

Sap new gl configuration