Shashi DATABASE FUNCTIONAL DEPENDENCY QUESTION
Download as PPTX, PDF0 likes441 views
A student named Shashi Kumar Suman with roll number 16072 from section A gave a presentation on functional dependency in databases. The presentation covered the topic of functional dependency, which is a key concept in database design and normalization. It explained how functional dependencies constrain how values in one set of columns in a table determine values in another set of columns in that same table.
1 of 5
Downloaded 10 times
Ad
Recommended
Functional dependencies and normalization
Functional dependencies and normalizationdaxesh chauhan Functional dependencies play a key role in database design and normalization. A functional dependency (FD) is a constraint that one attribute determines another. FDs have various definitions but generally mean that given the value of one attribute (left side), the value of another attribute (right side) is determined. Armstrong's axioms are used to derive implied FDs from a set of FDs. The closure of an attribute set or set of FDs finds all attributes/FDs logically implied. Normalization aims to eliminate anomalies and is assessed using normal forms like 1NF, 2NF, 3NF, BCNF which impose additional constraints on table designs.
Functional dependency
Functional dependencyTamajit Chakraborty The document defines functional dependencies and describes how they constrain relationships between attributes in a database relation. A functional dependency X → Y means the Y attribute is functionally determined by the X attribute(s). The closure of a set of functional dependencies includes all dependencies that can be logically derived. Normalization aims to eliminate anomalies by decomposing relations based on their functional dependencies until a desired normal form is reached.
Normlaization
NormlaizationSamir Sabry The document discusses database normalization through three forms:
1) First normal form (1NF) involves eliminating repeating groups and defining primary keys so that each attribute depends on the full primary key.
2) Second normal form (2NF) builds on 1NF and removes partial dependencies by splitting tables where attributes depend on only part of a composite primary key.
3) Third normal form (3NF) builds on 2NF and removes transitive dependencies by splitting tables where a non-key attribute depends on another non-key attribute rather than the primary key. The goal is to isolate each functional dependency and minimize data anomalies.
Normalization in Database
Normalization in DatabaseRoshni Singh Normalization is the process of organizing data in a database. This includes creating tables and establishing relationships between those tables according to rules designed both to protect the data and to make the database more flexible by eliminating redundancy and inconsistent dependency.
Database Dependency with NetVisn
Database Dependency with NetVisnEnvisn NetVisn clearly identifies which objects will be impacted due to a database table/column changes and it does this across your entire Cognos environment. Impact can be viewed at a summary and detail level at the same time.
1 fn dependency
1 fn dependencyMr Patrick NIYISHAKA This document discusses functional dependencies in database relations. It defines functional dependency as a relationship where the value of one attribute (the dependent attribute) is determined by the value of another attribute or set of attributes (the determinant attributes). It provides examples of functional dependencies, such as child being functionally dependent on mother, but not vice versa. The document also includes an example employee database relation showing the primary key of empno and functional dependencies between attributes.
Normalization
Normalizationvinayakanegundi 1) Normalization is the process of organizing data to minimize redundancy and dependency.
2) The main normal forms are 1NF, 2NF, 3NF, and BCNF, with each form addressing a more specific type of dependency or anomaly.
3) Normalization involves analyzing relations based on their functional dependencies and primary keys, then decomposing relations to eliminate certain types of dependencies and anomalies.
Theory of dependencies in relational database
Theory of dependencies in relational databaseJyoti Ranjan Pattnaik The document discusses database design and normalization. It defines functional dependencies and covers Armstrong's axioms and the concept of normal forms including 1NF, 2NF, 3NF, BCNF, 4NF and 5NF. The document also discusses anomalies, decomposition, de-normalization, multi-valued dependencies and join dependencies. The goal of normalization is to minimize data anomalies while ensuring data integrity.
Ism normalization pine valley 2012
Ism normalization pine valley 2012Akshit R Shah The document discusses database normalization concepts including first normal form (1NF), second normal form (2NF), and third normal form (3NF). 1NF requires removing duplicate columns, 2NF removes redundant data by separating subsets of data that apply to multiple rows into new tables, and 3NF removes columns that are not dependent on the primary key. The document also provides examples of normalization exercises and applying normalization rules to sample data.
Ch7
Ch7Subhankar Chowdhury The document summarizes key aspects of relational database design including:
1) Features of good relational design such as atomic domains and normal forms.
2) The use of functional dependencies to test relations, specify constraints, and imply new dependencies.
3) Boyce-Codd normal form which determines if a relation is properly normalized based on its functional dependencies.
Normalization
NormalizationGoogle Student Ambassador The document discusses normalization of database relations. It begins by defining first normal form (1NF) which requires that each cell contain a single value. To achieve 1NF, repeating groups are removed by either entering the repeated values in empty cells or creating a new relation. The document then covers second normal form (2NF) which requires attributes are fully dependent on the primary key. Finally, it discusses third normal form (3NF) which removes transitive dependencies by placing attributes in new relations.
functional dependencies with example
functional dependencies with exampleSiddhi Viradiya The document discusses different normal forms for organizing data in a database, including 1NF, 2NF, 3NF, and BCNF. 1NF requires attributes to be atomic and no repeating groups. 2NF removes partial dependencies by requiring non-prime attributes to depend on the whole primary key. 3NF removes non-key attributes that are not dependent on the primary key. BCNF is stronger than 3NF and requires all determinants to be candidate keys. Examples are provided to illustrate how relations can be decomposed to satisfy 3NF and BCNF.
Functional dependencies and normalization for relational databases
Functional dependencies and normalization for relational databasesJafar Nesargi This document discusses guidelines for designing relational databases. It covers four informal measures of quality: semantics of attributes, reducing redundancy, reducing null values, and avoiding spurious tuples. The guidelines are: 1) design relations so their meaning is clear, 2) avoid anomalies like insertion, deletion and modification anomalies, 3) minimize null values in attributes, and 4) design relations to join without generating spurious tuples. The document uses examples to illustrate these concepts and their importance for database design.
Normalization in DBMS
Normalization in DBMSPrateek Parimal Normalization is a process used to organize data in a database. It involves breaking tables into smaller, more manageable pieces to reduce data redundancy and improve data integrity. There are several normal forms including 1NF, 2NF, 3NF, BCNF, 4NF and 5NF. The document provides examples of tables and how they can be decomposed into different normal forms to eliminate anomalies and redundancy through the creation of additional tables and establishing primary keys.
B trees in Data Structure
B trees in Data StructureAnuj Modi B-Trees are tree data structures used to store data on disk storage. They allow for efficient retrieval of data compared to binary trees when using disk storage due to reduced height. B-Trees group data into nodes that can have multiple children, reducing the height needed compared to binary trees. Keys are inserted by adding to leaf nodes or splitting nodes and promoting middle keys. Deletion involves removing from leaf nodes, borrowing/promoting keys, or joining nodes.
Normalization
NormalizationSalman Memon The document discusses database normalization. It begins with a brief history of normalization, introduced by Edgar Codd in 1970. It then defines database normalization as removing redundant data to improve storage efficiency, data integrity, and scalability. The document provides examples to illustrate the concepts of first, second, and third normal forms. It shows how a book database can be normalized by separating data into separate tables for authors, subjects, and books and defining relationships between the tables using primary and foreign keys. This normalization process addresses issues like redundant data, data integrity, and scalability.
Lecture 04 normalization 
Lecture 04 normalization emailharmeet The document discusses normalization of database tables. It covers normal forms including 1NF, 2NF, 3NF, BCNF and 4NF. The process of normalization reduces data redundancies and helps eliminate data anomalies. Normalization is done concurrently with entity-relationship modeling to produce an effective database design. In some cases, denormalization may be needed to generate information more efficiently.
Database Normalization 1NF, 2NF, 3NF, BCNF, 4NF, 5NF
Database Normalization 1NF, 2NF, 3NF, BCNF, 4NF, 5NFOum Saokosal The document discusses normalization in database design. Normalization is the process of organizing data to avoid redundancy and dependency. It involves splitting tables and restructuring relationships between tables. The document outlines various normal forms including 1NF, 2NF, 3NF, BCNF, 4NF and 5NF and provides examples to illustrate how to normalize tables to conform to each form.
16. Concurrency Control in DBMS
16. Concurrency Control in DBMSkoolkampus The document discusses various concurrency control techniques for database systems, including lock-based protocols, timestamp-based protocols, and graph-based protocols. Lock-based protocols use locks to control concurrent access to data with different lock modes. Timestamp-based protocols assign timestamps to transactions and manage concurrency to ensure transactions execute in timestamp order. Graph-based protocols impose a partial ordering on data items modeled as a directed acyclic graph.
15. Transactions in DBMS
15. Transactions in DBMSkoolkampus Transactions are units of program execution that access and update database items. A transaction must preserve database consistency. Concurrent transactions are allowed for increased throughput but can result in inconsistent views. Serializability ensures transactions appear to execute serially in some order. Conflict serializability compares transaction instruction orderings while view serializability compares transaction views. Concurrency control protocols enforce serializability without examining schedules after execution.
Dbms slides
Dbms slidesrahulrathore725 This document discusses the key components of a database system including applications, file systems, data views, query processors, users and administrators, data languages, transaction management, and storage managers. It provides examples of common database applications and describes how data is abstracted at the physical, logical, and view levels. It also explains the roles of DDL, DML, transactions, and storage managers in database design and management.
Database design & Normalization (1NF, 2NF, 3NF)
Database design & Normalization (1NF, 2NF, 3NF)Jargalsaikhan Alyeksandr The document discusses database design and relational database management systems. It covers key concepts like normalization, primary keys, foreign keys, and relationships between tables. Normalization is the process of organizing data to eliminate redundancy and ensure data is stored correctly. There are five normal forms with third normal form being sufficient for most applications. Tables are related through primary and foreign keys and different types of relationships can exist between tables like one-to-one, one-to-many, and many-to-many.
The Gaussian Process Modeling Module in UQLab
The Gaussian Process Modeling Module in UQLabJournal of Soft Computing in Civil Engineering We introduce the Gaussian process (GP) modeling module developed within the UQLab software framework. The novel design of the GP-module aims at providing seamless integration of GP modeling into any uncertainty quantification workflow, as well as a standalone surrogate modeling tool. We first briefly present the key mathematical tools on the basis of GP modeling (a.k.a. Kriging), as well as the associated theoretical and computational framework. We then provide an extensive overview of the available features of the software and demonstrate its flexibility and user-friendliness. Finally, we showcase the usage and the performance of the software on several applications borrowed from different fields of engineering. These include a basic surrogate of a well-known analytical benchmark function; a hierarchical Kriging example applied to wind turbine aero-servo-elastic simulations and a more complex geotechnical example that requires a non-stationary, user-defined correlation function. The GP-module, like the rest of the scientific code that is shipped with UQLab, is open source (BSD license).
AI-assisted Software Testing (3-hours tutorial)
AI-assisted Software Testing (3-hours tutorial)Vəhid Gəruslu Invited tutorial at the Istanbul Software Testing Conference (ISTC) 2025 https://iststc.com/
Lidar for Autonomous Driving, LiDAR Mapping for Driverless Cars.pptx
Lidar for Autonomous Driving, LiDAR Mapping for Driverless Cars.pptxRishavKumar530754 LiDAR-Based System for Autonomous Cars
Autonomous Driving with LiDAR Tech
LiDAR Integration in Self-Driving Cars
Self-Driving Vehicles Using LiDAR
LiDAR Mapping for Driverless Cars
Data Structures_Searching and Sorting.pptx
Data Structures_Searching and Sorting.pptxRushaliDeshmukh2 Sorting Order and Stability in Sorting.
Concept of Internal and External Sorting.
Bubble Sort,
Insertion Sort,
Selection Sort,
Quick Sort and
Merge Sort,
Radix Sort, and
Shell Sort,
External Sorting, Time complexity analysis of Sorting Algorithms.
ADVXAI IN MALWARE ANALYSIS FRAMEWORK: BALANCING EXPLAINABILITY WITH SECURITY
ADVXAI IN MALWARE ANALYSIS FRAMEWORK: BALANCING EXPLAINABILITY WITH SECURITYijscai With the increased use of Artificial Intelligence (AI) in malware analysis there is also an increased need to
understand the decisions models make when identifying malicious artifacts. Explainable AI (XAI) becomes
the answer to interpreting the decision-making process that AI malware analysis models use to determine
malicious benign samples to gain trust that in a production environment, the system is able to catch
malware. With any cyber innovation brings a new set of challenges and literature soon came out about XAI
as a new attack vector. Adversarial XAI (AdvXAI) is a relatively new concept but with AI applications in
many sectors, it is crucial to quickly respond to the attack surface that it creates. This paper seeks to
conceptualize a theoretical framework focused on addressing AdvXAI in malware analysis in an effort to
balance explainability with security. Following this framework, designing a machine with an AI malware
detection and analysis model will ensure that it can effectively analyze malware, explain how it came to its
decision, and be built securely to avoid adversarial attacks and manipulations. The framework focuses on
choosing malware datasets to train the model, choosing the AI model, choosing an XAI technique,
implementing AdvXAI defensive measures, and continually evaluating the model. This framework will
significantly contribute to automated malware detection and XAI efforts allowing for secure systems that
are resilient to adversarial attacks.
Ad
More Related Content
Viewers also liked (15)
Theory of dependencies in relational database
Theory of dependencies in relational databaseJyoti Ranjan Pattnaik The document discusses database design and normalization. It defines functional dependencies and covers Armstrong's axioms and the concept of normal forms including 1NF, 2NF, 3NF, BCNF, 4NF and 5NF. The document also discusses anomalies, decomposition, de-normalization, multi-valued dependencies and join dependencies. The goal of normalization is to minimize data anomalies while ensuring data integrity.
Ism normalization pine valley 2012
Ism normalization pine valley 2012Akshit R Shah The document discusses database normalization concepts including first normal form (1NF), second normal form (2NF), and third normal form (3NF). 1NF requires removing duplicate columns, 2NF removes redundant data by separating subsets of data that apply to multiple rows into new tables, and 3NF removes columns that are not dependent on the primary key. The document also provides examples of normalization exercises and applying normalization rules to sample data.
Ch7
Ch7Subhankar Chowdhury The document summarizes key aspects of relational database design including:
1) Features of good relational design such as atomic domains and normal forms.
2) The use of functional dependencies to test relations, specify constraints, and imply new dependencies.
3) Boyce-Codd normal form which determines if a relation is properly normalized based on its functional dependencies.
Normalization
NormalizationGoogle Student Ambassador The document discusses normalization of database relations. It begins by defining first normal form (1NF) which requires that each cell contain a single value. To achieve 1NF, repeating groups are removed by either entering the repeated values in empty cells or creating a new relation. The document then covers second normal form (2NF) which requires attributes are fully dependent on the primary key. Finally, it discusses third normal form (3NF) which removes transitive dependencies by placing attributes in new relations.
functional dependencies with example
functional dependencies with exampleSiddhi Viradiya The document discusses different normal forms for organizing data in a database, including 1NF, 2NF, 3NF, and BCNF. 1NF requires attributes to be atomic and no repeating groups. 2NF removes partial dependencies by requiring non-prime attributes to depend on the whole primary key. 3NF removes non-key attributes that are not dependent on the primary key. BCNF is stronger than 3NF and requires all determinants to be candidate keys. Examples are provided to illustrate how relations can be decomposed to satisfy 3NF and BCNF.
Functional dependencies and normalization for relational databases
Functional dependencies and normalization for relational databasesJafar Nesargi This document discusses guidelines for designing relational databases. It covers four informal measures of quality: semantics of attributes, reducing redundancy, reducing null values, and avoiding spurious tuples. The guidelines are: 1) design relations so their meaning is clear, 2) avoid anomalies like insertion, deletion and modification anomalies, 3) minimize null values in attributes, and 4) design relations to join without generating spurious tuples. The document uses examples to illustrate these concepts and their importance for database design.
Normalization in DBMS
Normalization in DBMSPrateek Parimal Normalization is a process used to organize data in a database. It involves breaking tables into smaller, more manageable pieces to reduce data redundancy and improve data integrity. There are several normal forms including 1NF, 2NF, 3NF, BCNF, 4NF and 5NF. The document provides examples of tables and how they can be decomposed into different normal forms to eliminate anomalies and redundancy through the creation of additional tables and establishing primary keys.
B trees in Data Structure
B trees in Data StructureAnuj Modi B-Trees are tree data structures used to store data on disk storage. They allow for efficient retrieval of data compared to binary trees when using disk storage due to reduced height. B-Trees group data into nodes that can have multiple children, reducing the height needed compared to binary trees. Keys are inserted by adding to leaf nodes or splitting nodes and promoting middle keys. Deletion involves removing from leaf nodes, borrowing/promoting keys, or joining nodes.
Normalization
NormalizationSalman Memon The document discusses database normalization. It begins with a brief history of normalization, introduced by Edgar Codd in 1970. It then defines database normalization as removing redundant data to improve storage efficiency, data integrity, and scalability. The document provides examples to illustrate the concepts of first, second, and third normal forms. It shows how a book database can be normalized by separating data into separate tables for authors, subjects, and books and defining relationships between the tables using primary and foreign keys. This normalization process addresses issues like redundant data, data integrity, and scalability.
Lecture 04 normalization
Lecture 04 normalization emailharmeet The document discusses normalization of database tables. It covers normal forms including 1NF, 2NF, 3NF, BCNF and 4NF. The process of normalization reduces data redundancies and helps eliminate data anomalies. Normalization is done concurrently with entity-relationship modeling to produce an effective database design. In some cases, denormalization may be needed to generate information more efficiently.
Database Normalization 1NF, 2NF, 3NF, BCNF, 4NF, 5NF
Database Normalization 1NF, 2NF, 3NF, BCNF, 4NF, 5NFOum Saokosal The document discusses normalization in database design. Normalization is the process of organizing data to avoid redundancy and dependency. It involves splitting tables and restructuring relationships between tables. The document outlines various normal forms including 1NF, 2NF, 3NF, BCNF, 4NF and 5NF and provides examples to illustrate how to normalize tables to conform to each form.
16. Concurrency Control in DBMS
16. Concurrency Control in DBMSkoolkampus The document discusses various concurrency control techniques for database systems, including lock-based protocols, timestamp-based protocols, and graph-based protocols. Lock-based protocols use locks to control concurrent access to data with different lock modes. Timestamp-based protocols assign timestamps to transactions and manage concurrency to ensure transactions execute in timestamp order. Graph-based protocols impose a partial ordering on data items modeled as a directed acyclic graph.
15. Transactions in DBMS
15. Transactions in DBMSkoolkampus Transactions are units of program execution that access and update database items. A transaction must preserve database consistency. Concurrent transactions are allowed for increased throughput but can result in inconsistent views. Serializability ensures transactions appear to execute serially in some order. Conflict serializability compares transaction instruction orderings while view serializability compares transaction views. Concurrency control protocols enforce serializability without examining schedules after execution.
Dbms slides
Dbms slidesrahulrathore725 This document discusses the key components of a database system including applications, file systems, data views, query processors, users and administrators, data languages, transaction management, and storage managers. It provides examples of common database applications and describes how data is abstracted at the physical, logical, and view levels. It also explains the roles of DDL, DML, transactions, and storage managers in database design and management.
Database design & Normalization (1NF, 2NF, 3NF)
Database design & Normalization (1NF, 2NF, 3NF)Jargalsaikhan Alyeksandr The document discusses database design and relational database management systems. It covers key concepts like normalization, primary keys, foreign keys, and relationships between tables. Normalization is the process of organizing data to eliminate redundancy and ensure data is stored correctly. There are five normal forms with third normal form being sufficient for most applications. Tables are related through primary and foreign keys and different types of relationships can exist between tables like one-to-one, one-to-many, and many-to-many.
Recently uploaded (20)
The Gaussian Process Modeling Module in UQLab
The Gaussian Process Modeling Module in UQLabJournal of Soft Computing in Civil Engineering We introduce the Gaussian process (GP) modeling module developed within the UQLab software framework. The novel design of the GP-module aims at providing seamless integration of GP modeling into any uncertainty quantification workflow, as well as a standalone surrogate modeling tool. We first briefly present the key mathematical tools on the basis of GP modeling (a.k.a. Kriging), as well as the associated theoretical and computational framework. We then provide an extensive overview of the available features of the software and demonstrate its flexibility and user-friendliness. Finally, we showcase the usage and the performance of the software on several applications borrowed from different fields of engineering. These include a basic surrogate of a well-known analytical benchmark function; a hierarchical Kriging example applied to wind turbine aero-servo-elastic simulations and a more complex geotechnical example that requires a non-stationary, user-defined correlation function. The GP-module, like the rest of the scientific code that is shipped with UQLab, is open source (BSD license).
AI-assisted Software Testing (3-hours tutorial)
AI-assisted Software Testing (3-hours tutorial)Vəhid Gəruslu Invited tutorial at the Istanbul Software Testing Conference (ISTC) 2025 https://iststc.com/
Lidar for Autonomous Driving, LiDAR Mapping for Driverless Cars.pptx
Lidar for Autonomous Driving, LiDAR Mapping for Driverless Cars.pptxRishavKumar530754 LiDAR-Based System for Autonomous Cars
Autonomous Driving with LiDAR Tech
LiDAR Integration in Self-Driving Cars
Self-Driving Vehicles Using LiDAR
LiDAR Mapping for Driverless Cars
Data Structures_Searching and Sorting.pptx
Data Structures_Searching and Sorting.pptxRushaliDeshmukh2 Sorting Order and Stability in Sorting.
Concept of Internal and External Sorting.
Bubble Sort,
Insertion Sort,
Selection Sort,
Quick Sort and
Merge Sort,
Radix Sort, and
Shell Sort,
External Sorting, Time complexity analysis of Sorting Algorithms.
ADVXAI IN MALWARE ANALYSIS FRAMEWORK: BALANCING EXPLAINABILITY WITH SECURITY
ADVXAI IN MALWARE ANALYSIS FRAMEWORK: BALANCING EXPLAINABILITY WITH SECURITYijscai With the increased use of Artificial Intelligence (AI) in malware analysis there is also an increased need to
understand the decisions models make when identifying malicious artifacts. Explainable AI (XAI) becomes
the answer to interpreting the decision-making process that AI malware analysis models use to determine
malicious benign samples to gain trust that in a production environment, the system is able to catch
malware. With any cyber innovation brings a new set of challenges and literature soon came out about XAI
as a new attack vector. Adversarial XAI (AdvXAI) is a relatively new concept but with AI applications in
many sectors, it is crucial to quickly respond to the attack surface that it creates. This paper seeks to
conceptualize a theoretical framework focused on addressing AdvXAI in malware analysis in an effort to
balance explainability with security. Following this framework, designing a machine with an AI malware
detection and analysis model will ensure that it can effectively analyze malware, explain how it came to its
decision, and be built securely to avoid adversarial attacks and manipulations. The framework focuses on
choosing malware datasets to train the model, choosing the AI model, choosing an XAI technique,
implementing AdvXAI defensive measures, and continually evaluating the model. This framework will
significantly contribute to automated malware detection and XAI efforts allowing for secure systems that
are resilient to adversarial attacks.
ELectronics Boards & Product Testing_Shiju.pdf
ELectronics Boards & Product Testing_Shiju.pdfShiju Jacob This presentation provides a high level insight about DFT analysis and test coverage calculation, finalizing test strategy, and types of tests at different levels of the product.
International Journal of Distributed and Parallel systems (IJDPS)
International Journal of Distributed and Parallel systems (IJDPS)samueljackson3773 The growth of Internet and other web technologies requires the development of new
algorithms and architectures for parallel and distributed computing. International journal of
Distributed and parallel systems is a bimonthly open access peer-reviewed journal aims to
publish high quality scientific papers arising from original research and development from
the international community in the areas of parallel and distributed systems. IJDPS serves
as a platform for engineers and researchers to present new ideas and system technology,
with an interactive and friendly, but strongly professional atmosphere.
π0.5: a Vision-Language-Action Model with Open-World Generalization
π0.5: a Vision-Language-Action Model with Open-World GeneralizationNABLAS株式会社 今回の資料「Transfusion / π0 / π0.5」は、画像・言語・アクションを統合するロボット基盤モデルについて紹介しています。
拡散×自己回帰を融合したTransformerをベースに、π0.5ではオープンワールドでの推論・計画も可能に。
This presentation introduces robot foundation models that integrate vision, language, and action.
Built on a Transformer combining diffusion and autoregression, π0.5 enables reasoning and planning in open-world settings.
some basics electrical and electronics knowledge
some basics electrical and electronics knowledgenguyentrungdo88 This chapter discribe about common electrical divices such as passive component, the internaltional system unit and international system prefixes.
Introduction to FLUID MECHANICS & KINEMATICS
Introduction to FLUID MECHANICS & KINEMATICSnarayanaswamygdas Fluid mechanics is the branch of physics concerned with the mechanics of fluids (liquids, gases, and plasmas) and the forces on them. Originally applied to water (hydromechanics), it found applications in a wide range of disciplines, including mechanical, aerospace, civil, chemical, and biomedical engineering, as well as geophysics, oceanography, meteorology, astrophysics, and biology.
It can be divided into fluid statics, the study of various fluids at rest, and fluid dynamics.
Fluid statics, also known as hydrostatics, is the study of fluids at rest, specifically when there's no relative motion between fluid particles. It focuses on the conditions under which fluids are in stable equilibrium and doesn't involve fluid motion.
Fluid kinematics is the branch of fluid mechanics that focuses on describing and analyzing the motion of fluids, such as liquids and gases, without considering the forces that cause the motion. It deals with the geometrical and temporal aspects of fluid flow, including velocity and acceleration. Fluid dynamics, on the other hand, considers the forces acting on the fluid.
Fluid dynamics is the study of the effect of forces on fluid motion. It is a branch of continuum mechanics, a subject which models matter without using the information that it is made out of atoms; that is, it models matter from a macroscopic viewpoint rather than from microscopic.
Fluid mechanics, especially fluid dynamics, is an active field of research, typically mathematically complex. Many problems are partly or wholly unsolved and are best addressed by numerical methods, typically using computers. A modern discipline, called computational fluid dynamics (CFD), is devoted to this approach. Particle image velocimetry, an experimental method for visualizing and analyzing fluid flow, also takes advantage of the highly visual nature of fluid flow.
Fundamentally, every fluid mechanical system is assumed to obey the basic laws :
Conservation of mass
Conservation of energy
Conservation of momentum
The continuum assumption
For example, the assumption that mass is conserved means that for any fixed control volume (for example, a spherical volume)—enclosed by a control surface—the rate of change of the mass contained in that volume is equal to the rate at which mass is passing through the surface from outside to inside, minus the rate at which mass is passing from inside to outside. This can be expressed as an equation in integral form over the control volume.
The continuum assumption is an idealization of continuum mechanics under which fluids can be treated as continuous, even though, on a microscopic scale, they are composed of molecules. Under the continuum assumption, macroscopic (observed/measurable) properties such as density, pressure, temperature, and bulk velocity are taken to be well-defined at "infinitesimal" volume elements—small in comparison to the characteristic length scale of the system, but large in comparison to molecular length scale
Compiler Design Unit1 PPT Phases of Compiler.pptx
Compiler Design Unit1 PPT Phases of Compiler.pptxRushaliDeshmukh2 Compiler phases
Lexical analysis
Syntax analysis
Semantic analysis
Intermediate (machine-independent) code generation
Intermediate code optimization
Target (machine-dependent) code generation
Target code optimization
DT REPORT by Tech titan GROUP to introduce the subject design Thinking
DT REPORT by Tech titan GROUP to introduce the subject design ThinkingDhruvChotaliya2 This a Report of a Design Thinking
Process Parameter Optimization for Minimizing Springback in Cold Drawing Proc...
Process Parameter Optimization for Minimizing Springback in Cold Drawing Proc...Journal of Soft Computing in Civil Engineering In tube drawing process, a tube is pulled out through a die and a plug to reduce its diameter and thickness as per the requirement. Dimensional accuracy of cold drawn tubes plays a vital role in the further quality of end products and controlling rejection in manufacturing processes of these end products. Springback phenomenon is the elastic strain recovery after removal of forming loads, causes geometrical inaccuracies in drawn tubes. Further, this leads to difficulty in achieving close dimensional tolerances. In the present work springback of EN 8 D tube material is studied for various cold drawing parameters. The process parameters in this work include die semi-angle, land width and drawing speed. The experimentation is done using Taguchi’s L36 orthogonal array, and then optimization is done in data analysis software Minitab 17. The results of ANOVA shows that 15 degrees die semi-angle,5 mm land width and 6 m/min drawing speed yields least springback. Furthermore, optimization algorithms named Particle Swarm Optimization (PSO), Simulated Annealing (SA) and Genetic Algorithm (GA) are applied which shows that 15 degrees die semi-angle, 10 mm land width and 8 m/min drawing speed results in minimal springback with almost 10.5 % improvement. Finally, the results of experimentation are validated with Finite Element Analysis technique using ANSYS.
15th International Conference on Computer Science, Engineering and Applicatio...
15th International Conference on Computer Science, Engineering and Applicatio...IJCSES Journal #computerscience #programming #coding #technology #programmer #python #computer #developer #tech #coder #javascript #java #codinglife #html #code #softwaredeveloper #webdeveloper #software #cybersecurity #linux #computerengineering #webdevelopment #softwareengineer #machinelearning #hacking #engineering #datascience #css #programmers #pythonprogramming
Process Parameter Optimization for Minimizing Springback in Cold Drawing Proc...
Process Parameter Optimization for Minimizing Springback in Cold Drawing Proc...Journal of Soft Computing in Civil Engineering
Ad
Shashi DATABASE FUNCTIONAL DEPENDENCY QUESTION
- 1. DATABASE PRESENTATION FUNCTIONAL DEPENDENCY (question no.:- 14.39) SHASHI KUMAR SUMAN ROLL NO- 16072 SECTION :-”A”
- 2. 14.39
- 3. Answer:-