S&L Digital Signage - Case Study - Virgin Pier Perth Airport
2 likes•436 views
S&L Digital Signage worked closely with key stakeholders to deliver signage for the new Virgin Pier T1 terminal at Perth Airport on time and on brand for its opening in late 2015. This included installing a large LED digital display, suspended signage throughout the terminal, and directional signs meeting regulatory requirements. S&L's ability to mobilize a qualified team for airport access and complete tasks around other construction enabled them to support the dynamic project schedule and deliver high quality signage solutions. The terminal and its signage were praised for setting a new standard in aviation design.
S&L Digital Signage - Case Study - Virgin Pier Perth Airport
- 1. Virgin Pier S&L Digital SignageS&L Digital Signage C A S E S T U D Y
- 2. S&L Digital SignageS&L Digital Signage C A S E S T U D Y Our role in the signage transformation at Perth Airport's new Virgin Pier T1 was hailed as a run (a) way success (!) following the launch of the new terminal in late 2015. During the final stages of the Woods Bagot designed terminal build, our team worked around the clock with key stakeholders PAPL and APN to ensure that statutory and wayfinding signage was delivered on brand, and on time, ready for passengers with flights nd to catch on 22 November 2015. Working around other trades, sometimes well into the midnight hours, our teams of up to 10 staff updated, amended, repositioned and added new signage to the terminal which has been lorded as setting a new benchmark in global aviation design. An impressive landmark project for our client, APN Outdoor, involved the design, manufacture and supply of a new LED Digital in the main entrance of the terminal. Located 9 metres above floor level and almost 7 metres wide, it is hard to miss as it displays eye catching advertising content.
- 3. S&L Digital SignageS&L Digital Signage C A S E S T U D Y Our works programme involved the Amid a lot of fanfare the Boeing 737-8FE following signage tasks across all at the Perth Terminal 1 preview event on restricted areas of the terminal: 13 November 2015 the aircraft taxied in to a water canon salute from local fire • LED digital advertising video wall; crews and coloured lighting. • Suspended signage throughout the terminal; • Curved lightbox advertising media signage in the baggage reclaim areas; • Portal signage in the secure zones; • Double sided, floor mounted, illuminated directional signage; • Aerobridge signage airside; • Statutory signage to meet fire regulations; • Travelator signage; • Replacement vision safety strips in all areas of the terminal; • Wayfinding map signage on information kiosks. Key to our success on this project was our ability to mobilise a strong, multi-faceted team with the relevant security checks and inductions for Perth Airport. This allowed us to support the range of tasks and out of hours requirements required on this project from within our Signs & Lines team. Secondary to this was the ability of our organisation to respond to the dynamic nature of the terminal development, incorporating flexible planning whilst still delivering a quality product. There is no doubting that the terminal (and its signage) is impressive.
- 4. S&L Digital SignageS&L Digital Signage C A S E S T U D Y To discuss your own digital signage strategy please don’t hesitate to get in touch. Tel: 08 9274 5151 Email: [email protected] www.digitalsignagewa.com.au S&L Digital Signage, 5 Meliador Way, Midvale, Perth WA 6056