Software Engineering - Chapter 4 - Requirements engineering

Chapter 4 – Requirements Engineering
Software Engineering
Mutah University
Faculty of IT, Department of Software Engineering
Dr. Ra’Fat A. AL-msie’deen
https://sites.google.com/site/ralmsideen/
rafatalmsiedeen@mutah.edu.jo
Chapter 4 Requirements Engineering 130/10/2014

Text Book:
 This material is based on chapter 4 of “Software
Engineering (l0th Edition)” by Ian Sommerville. Addison
Wesley, 2015, ISBN-10: 0137035152.
 https://iansommerville.com/software-engineering-book/
Chapter 1 Introduction 30/10/2014 2

Objectives
 The objective of this chapter is to introduce software requirements
and to explain the processes involved in discovering and
documenting these requirements. When you have read the chapter,
you will:
 understand the concepts of user and system requirements and
why these requirements should be written in different ways;
 understand the differences between functional and non-
functional software requirements;
 understand the main requirements engineering activities of
elicitation, analysis, and validation, and the relationships
between these activities;
 understand why requirements management is necessary and
how it supports other requirements engineering activities.
30/10/2014 Chapter 4 Requirements Engineering 3

Topics covered
 Functional and non-functional requirements
 Requirements engineering processes
 Requirements elicitation
 Requirements specification
 Requirements validation
 Requirements change

Requirements engineering
 The process of establishing the services that a customer
requires from a system and the constraints under which
it operates and is developed.
 The system requirements are the descriptions of the
system services and constraints that are generated
during the requirements engineering process.

What is a requirement?
 It may range from a high-level abstract statement of a
service or of a system constraint to a detailed
mathematical functional specification.
 This is inevitable as requirements may serve a dual
function
 May be the basis for a bid for a contract - therefore must be open
to interpretation;
 May be the basis for the contract itself - therefore must be
defined in detail;
 Both these statements may be called requirements.

Requirements abstraction (Davis)
Chapter 4 Requirements Engineering 7
“If a company wishes to let a contract for a large software development
project, it must define its needs in a sufficiently abstract way that a
solution is not pre-defined. The requirements must be written so that
several contractors can bid for the contract, offering, perhaps, different
ways of meeting the client organization’s needs. Once a contract has
been awarded, the contractor must write a system definition for the
client in more detail so that the client understands and can validate what
the software will do. Both of these documents may be called the
requirements document for the system.”
30/10/2014

Types of requirement
 User requirements
 Statements in natural language plus diagrams of the services the
system provides and its operational constraints. Written for
customers.
 System requirements
 A structured document setting out detailed descriptions of the
system’s functions, services and operational constraints. Defines
what should be implemented so may be part of a contract
between client and contractor.

User and system requirements

Readers of different types of requirements
specification
Readers of different types of requirements specification

System stakeholders
 Any person or organization who is affected by the
system in some way and so who has a legitimate interest
 Stakeholder types
 End users
 System managers
 System owners
 External stakeholders

Stakeholders in the Mentcare system
 Patients whose information is recorded in the system.
 Doctors who are responsible for assessing and treating
patients.
 Nurses who coordinate the consultations with doctors
and administer some treatments.
 Medical receptionists who manage patients’
appointments.
 IT staff who are responsible for installing and
maintaining the system.
Mentcare: A patient information system for mental health care

Stakeholders in the Mentcare system
 A medical ethics manager who must ensure that the
system meets current ethical guidelines for patient care.
 Health care managers who obtain management
information from the system.
 Medical records staff who are responsible for ensuring
that system information can be maintained and
preserved, and that record keeping procedures have
been properly implemented.

Agile methods and requirements
 Many agile methods argue that producing detailed
system requirements is a waste of time as requirements
change so quickly.
 The requirements document is therefore always out of
date.
 Agile methods usually use incremental requirements
engineering and may express requirements as ‘user
stories’ (discussed in Chapter 3).
 This is practical for business systems but problematic for
systems that require pre-delivery analysis (e.g. critical
systems) or systems developed by several teams.

Functional and non-functional requirements

Functional and non-functional requirements
 Functional requirements
 Statements of services the system should provide, how the
system should react to particular inputs and how the system
should behave in particular situations.
 May state what the system should not do.
 Non-functional requirements
 Constraints on the services or functions offered by the system
such as timing constraints, constraints on the development
process, standards, etc.
 Often apply to the system as a whole rather than individual
features or services.
 Domain requirements
 Constraints on the system from the domain of operation

Functional requirements
 Describe functionality or system services.
 Depend on the type of software, expected users and the
type of system where the software is used.
 Functional user requirements may be high-level
statements of what the system should do.
 Functional system requirements should describe the
system services in detail.

Mentcare system: functional requirements
 A user shall be able to search the appointments lists for
all clinics.
 The system shall generate each day, for each clinic, a
list of patients who are expected to attend appointments
that day.
 Each staff member using the system shall be uniquely
identified by his or her 8-digit employee number.

Requirements imprecision
 Problems arise when functional requirements are not
precisely stated.
 Ambiguous requirements may be interpreted in different
ways by developers and users.
 Consider the term ‘search’ in requirement 1
 User intention – search for a patient name across all
appointments in all clinics;
 Developer interpretation – search for a patient name in an
individual clinic. User chooses clinic then search.

Requirements completeness and consistency
 In principle, requirements should be both complete and
consistent.
 Complete
 They should include descriptions of all facilities required.
 Consistent
 There should be no conflicts or contradictions in the descriptions
of the system facilities.
 In practice, because of system and environmental
complexity, it is impossible to produce a complete and
consistent requirements document.

Non-functional requirements
 These define system properties and constraints e.g.
reliability, response time and storage requirements.
Constraints are I/O device capability, system
representations, etc.
 Process requirements may also be specified mandating
a particular IDE, programming language or development
method.
 Non-functional requirements may be more critical than
functional requirements. If these are not met, the system
may be useless.

Types of nonfunctional requirement
Types of non-functional requirements

Non-functional requirements implementation
 Non-functional requirements may affect the overall
architecture of a system rather than the individual
components.
 For example, to ensure that performance requirements are met,
you may have to organize the system to minimize
communications between components.
 A single non-functional requirement, such as a security
requirement, may generate a number of related
functional requirements that define system services that
are required.
 It may also generate requirements that restrict existing
requirements.

Non-functional classifications
 Product requirements
 Requirements which specify that the delivered product must
behave in a particular way e.g. execution speed, reliability, etc.
 Organisational requirements
 Requirements which are a consequence of organisational
policies and procedures e.g. process standards used,
implementation requirements, etc.
 External requirements
 Requirements which arise from factors which are external to the
system and its development process e.g. interoperability
requirements, legislative requirements, etc.

Examples of nonfunctional requirements in the
Mentcare system
Product requirement
The Mentcare system shall be available to all clinics during normal
working hours (Mon–Fri, 08:30–17.30). Downtime within normal
working hours shall not exceed five seconds in any one day.
Organizational requirement
Users of the Mentcare system shall authenticate themselves using
their health authority identity card.
External requirement
The system shall implement patient privacy provisions as set out in
HStan-03-2006-priv.
30/10/2014
Examples of possible non-functional requirements for the Mentcare system

Goals and requirements
 Non-functional requirements may be very difficult to state
precisely and imprecise requirements may be difficult to
verify.
 Goal
 A general intention of the user such as ease of use.
 Verifiable non-functional requirement
 A statement using some measure that can be objectively tested.
 Goals are helpful to developers as they convey the
intentions of the system users.

Usability requirements
 The system should be easy to use by medical staff and
should be organized in such a way that user errors are
minimized. (Goal)
 Medical staff shall be able to use all the system functions
after four hours of training. After this training, the
average number of errors made by experienced users
shall not exceed two per hour of system use. (Testable
non-functional requirement)

Metrics for specifying nonfunctional
requirements
Property Measure
Speed Processed transactions/second
User/event response time
Screen refresh time
Size Mbytes
Number of ROM chips
Ease of use Training time
Number of help frames
Reliability Mean time to failure
Probability of unavailability
Rate of failure occurrence
Availability
Robustness Time to restart after failure
Percentage of events causing failure
Probability of data corruption on failure
Portability Percentage of target dependent statements
Number of target systems
30/10/2014

Requirements engineering processes

Requirements engineering processes
 The processes used for RE vary widely depending on
the application domain, the people involved and the
organisation developing the requirements.
 However, there are a number of generic activities
common to all processes
 Requirements elicitation;
 Requirements analysis;
 Requirements validation;
 Requirements management.
 In practice, RE is an iterative activity in which these
processes are interleaved.

A spiral view of the requirements engineering
process
 Figure x shows this
interleaving.
 The activities are
organized as an
iterative process
around a spiral.
 The output of the RE
process is a system
requirements
document.
Figure x A spiral view of the requirements
engineering process

Requirements elicitation

Requirements elicitation and analysis
 Sometimes called requirements elicitation or
requirements discovery.
 Involves technical staff working with customers to find
out about the application domain, the services that the
system should provide and the system’s operational
constraints.
 May involve end-users, managers, engineers involved in
maintenance, domain experts, trade unions, etc. These
are called stakeholders.

 Software engineers work with a range of system
stakeholders to find out about the application domain,
the services that the system should provide, the required
system performance, hardware constraints, other
systems, etc.
 Stages include:
 Requirements discovery,
 Requirements classification and organization,
 Requirements prioritization and negotiation,
 Requirements specification.

Problems of requirements elicitation
 Stakeholders don’t know what they really want.
 Stakeholders express requirements in their own terms.
 Different stakeholders may have conflicting
requirements.
 Organisational and political factors may influence the
system requirements.
 The requirements change during the analysis process.
New stakeholders may emerge and the business
environment may change.

The requirements elicitation and analysis
process

Process activities
 Requirements discovery
 Interacting with stakeholders to discover their requirements.
Domain requirements are also discovered at this stage.
 Requirements classification and organisation
 Groups related requirements and organises them into coherent
clusters.
 Prioritisation and negotiation
 Prioritising requirements and resolving requirements conflicts.
 Requirements specification
 Requirements are documented and input into the next round of
the spiral.

Requirements discovery
 The process of gathering information about the required
and existing systems and distilling the user and system
requirements from this information.
 Interaction is with system stakeholders from managers to
external regulators.
 Systems normally have a range of stakeholders.

Interviewing
 Formal or informal interviews with stakeholders are part
of most RE processes.
 Types of interview
 Closed interviews based on pre-determined list of questions
 Open interviews where various issues are explored with
stakeholders.
 Effective interviewing
 Be open-minded, avoid pre-conceived ideas about the
requirements and are willing to listen to stakeholders.
 Prompt the interviewee to get discussions going using a
springboard question, a requirements proposal, or by working
together on a prototype system.

Interviews in practice
 Normally a mix of closed and open-ended interviewing.
 Interviews are good for getting an overall understanding
of what stakeholders do and how they might interact with
the system.
 Interviewers need to be open-minded without pre-
conceived ideas of what the system should do.
 You need to prompt the use to talk about the system by
suggesting requirements rather than simply asking them
what they want.

Problems with interviews
 Application specialists may use language to describe
their work that isn’t easy for the requirements engineer to
understand.
 Interviews are not good for understanding domain
requirements
 Requirements engineers cannot understand specific domain
terminology;
 Some domain knowledge is so familiar that people find it hard to
articulate or think that it isn’t worth articulating.

Ethnography
 A social scientist spends a considerable time observing
and analysing how people actually work.
 People do not have to explain or articulate their work.
 Social and organisational factors of importance may be
observed.
 Ethnographic studies have shown that work is usually
richer and more complex than suggested by simple
system models.
A branch of anthropology dealing with the
scientific description of individual cultures.

Scope of ethnography
 Requirements that are derived from the way that people
actually work rather than the way I which process
definitions suggest that they ought to work.
 Requirements that are derived from cooperation and
awareness of other people’s activities.
 Awareness of what other people are doing leads to changes in
the ways in which we do things.
 Ethnography is effective for understanding existing
processes but cannot identify new features that should
be added to a system.
Ethnography is particularly
effective for discovering two
types of requirements:

Focused ethnography
 Developed in a project studying the air traffic control
process
 Combines ethnography with prototyping
 Prototype development results in unanswered questions
which focus the ethnographic analysis.
 The problem with ethnography is that it studies existing
practices which may have some historical basis which is
no longer relevant.

Ethnography and prototyping for requirements
analysis

Stories and scenarios
 Scenarios and user stories are real-life examples of how
a system can be used.
 Stories and scenarios are a description of how a system
may be used for a particular task.
 Because they are based on a practical situation,
stakeholders can relate to them and can comment on
their situation with respect to the story.

Photo sharing in the classroom (iLearn)
 Jack is a primary school teacher in Ullapool (a village in northern Scotland). He has
decided that a class project should be focused around the fishing industry in the area,
looking at the history, development and economic impact of fishing. As part of this,
pupils are asked to gather and share reminiscences from relatives, use newspaper
archives and collect old photographs related to fishing and fishing communities in the
area. Pupils use an iLearn wiki to gather together fishing stories and SCRAN (a
history resources site) to access newspaper archives and photographs. However,
Jack also needs a photo sharing site as he wants pupils to take and comment on
each others’ photos and to upload scans of old photographs that they may have in
their families.
Jack sends an email to a primary school teachers group, which he is a member of to
see if anyone can recommend an appropriate system. Two teachers reply and both
suggest that he uses KidsTakePics, a photo sharing site that allows teachers to check
and moderate content. As KidsTakePics is not integrated with the iLearn
authentication service, he sets up a teacher and a class account. He uses the iLearn
setup service to add KidsTakePics to the services seen by the pupils in his class so
that when they log in, they can immediately use the system to upload photos from
their mobile devices and class computers.
“A user story for the iLearn system”

Scenarios
 A structured form of user story
 Scenarios should include
 A description of the starting situation;
 A description of the normal flow of events;
 A description of what can go wrong;
 Information about other concurrent activities;
 A description of the state when the scenario finishes.

Uploading photos (iLearn)
 Initial assumption: A user or a group of users have one or more digital photographs
to be uploaded to the picture sharing site. These are saved on either a tablet or
laptop computer. They have successfully logged on to KidsTakePics.
 Normal: The user chooses upload photos and they are prompted to select the
photos to be uploaded on their computer and to select the project name under which
the photos will be stored. They should also be given the option of inputting keywords
that should be associated with each uploaded photo. Uploaded photos are named by
creating a conjunction of the user name with the filename of the photo on the local
computer.
 On completion of the upload, the system automatically sends an email to the project
moderator asking them to check new content and generates an on-screen message
to the user that this has been done.
“Scenario for uploading photos in KidsTakePics”

Uploading photos
 What can go wrong:
 No moderator is associated with the selected project. An email is automatically
generated to the school administrator asking them to nominate a project moderator.
Users should be informed that there could be a delay in making their photos visible.
 Photos with the same name have already been uploaded by the same user. The user
should be asked if they wish to re-upload the photos with the same name, rename
the photos or cancel the upload. If they chose to re-upload the photos, the originals
are overwritten. If they chose to rename the photos, a new name is automatically
generated by adding a number to the existing file name.
 Other activities: The moderator may be logged on to the system and may approve
photos as they are uploaded.
 System state on completion: User is logged on. The selected photos have been
uploaded and assigned a status ‘awaiting moderation’. Photos are visible to the
moderator and to the user who uploaded them.

Requirements specification

Requirements specification
 The process of writing down the user and system
requirements in a requirements document.
 User requirements have to be understandable by end-
users and customers who do not have a technical
background.
 System requirements are more detailed requirements
and may include more technical information.
 The requirements may be part of a contract for the
system development
 It is therefore important that these are as complete as possible.

Ways of writing a system requirements
specification
Notation Description
Natural language The requirements are written using numbered sentences in natural language.
Each sentence should express one requirement.
Structured natural
language
The requirements are written in natural language on a standard form or
template. Each field provides information about an aspect of the
requirement.
Design description
languages
This approach uses a language like a programming language, but with more
abstract features to specify the requirements by defining an operational
model of the system. This approach is now rarely used although it can be
useful for interface specifications.
Graphical notations Graphical models, supplemented by text annotations, are used to define the
functional requirements for the system; UML use case and sequence
diagrams are commonly used.
Mathematical
specifications
These notations are based on mathematical concepts such as finite-state
machines or sets. Although these unambiguous specifications can reduce
the ambiguity in a requirements document, most customers don’t understand
a formal specification. They cannot check that it represents what they want
and are reluctant to accept it as a system contract
30/10/2014
Notations for writing system requirements

Requirements and design
 In principle, requirements should state what the system
should do and the design should describe how it does
this.
 In practice, requirements and design are inseparable
 A system architecture may be designed to structure the
requirements;
 The system may inter-operate with other systems that generate
design requirements;
 The use of a specific architecture to satisfy non-functional
requirements may be a domain requirement.
 This may be the consequence of a regulatory requirement.

Natural language specification
 Requirements are written as natural language sentences
supplemented by diagrams and tables.
 Used for writing requirements because it is expressive,
intuitive and universal. This means that the requirements
can be understood by users and customers.

Guidelines for writing requirements
 Invent a standard format and use it for all requirements.
 Use language in a consistent way. Use shall for
mandatory requirements, should for desirable
requirements *.
 Use text highlighting to identify key parts of the
requirement.
 Avoid the use of computer jargon.
 Include an explanation (rationale) of why a requirement
is necessary.
* Use language consistently to distinguish between mandatory and desirable requirements.
Mandatory requirements are requirements that the system must support and are usually written
using “shall.” Desirable requirements are not essential and are written using “should.”
(bold, italic, or color)
you should avoid the use of jargon,
abbreviations, and acronyms.

Problems with natural language
 Lack of clarity
 Precision is difficult without making the document difficult to
read.
 Requirements confusion
 Functional and non-functional requirements tend to be mixed-up.
 Requirements amalgamation
 Several different requirements may be expressed together.

Example requirements for the insulin pump
software system
3.2 The system shall measure the blood sugar and deliver
insulin, if required, every 10 minutes. (Changes in blood sugar
are relatively slow so more frequent measurement is
unnecessary; less frequent measurement could lead to
unnecessarily high sugar levels.)
3.6 The system shall run a self-test routine every minute with
the conditions to be tested and the associated actions defined
in Table 1. (A self-test routine can discover hardware and
software problems and alert the user to the fact the normal
operation may be impossible.)
30/10/2014

Structured specifications
 An approach to writing requirements where the freedom
of the requirements writer is limited and requirements
are written in a standard way.
 This works well for some types of requirements e.g.
requirements for embedded control system but is
sometimes too rigid for writing business system
requirements.

Form-based specifications
 Definition of the function or entity.
 Description of inputs and where they come from.
 Description of outputs and where they go to.
 Information about the information needed for the
computation and other entities used.
 Description of the action to be taken.
 Pre and post conditions (if appropriate).
 The side effects (if any) of the function.

A structured specification of a requirement for
an insulin pump
The structured specification of a requirement for an insulin
pump …

an insulin pump

an insulin pump …

Tabular specification
 Used to supplement natural language.
 Particularly useful when you have to define a number of
possible alternative courses of action.
 For example, the insulin pump systems bases its
computations on the rate of change of blood sugar level
and the tabular specification explains how to calculate
the insulin requirement for different scenarios.

Tabular specification of computation for an
insulin pump
Condition Action
Sugar level falling (r2 < r1) CompDose = 0
Sugar level stable (r2 = r1) CompDose = 0
Sugar level increasing and rate of
increase decreasing
((r2 – r1) < (r1 – r0))
CompDose = 0
Sugar level increasing and rate of
increase stable or increasing
((r2 – r1) ≥ (r1 – r0))
CompDose =
round ((r2 – r1)/4)
If rounded result = 0 then
CompDose =
MinimumDose
30/10/2014

Use cases
 Use-cases are a kind of scenario that are included in the
UML.
 Use cases identify the actors in an interaction and which
describe the interaction itself.
 A set of use cases should describe all possible
interactions with the system.
 High-level graphical model supplemented by more
detailed tabular description (see Chapter 5).
 UML sequence diagrams may be used to add detail to
use-cases by showing the sequence of event processing
in the system.

Use cases for the Mentcare system

The software requirements document
 The software requirements document is the official
statement of what is required of the system developers.
 Should include both a definition of user requirements
and a specification of the system requirements.
 It is NOT a design document. As far as possible, it
should set of WHAT the system should do rather than
HOW it should do it.

Users of a requirements document
7030/10/2014

Requirements document variability
 Information in requirements document depends on type
of system and the approach to development used.
 Systems developed incrementally will, typically, have
less detail in the requirements document.
 Requirements documents standards have been
designed e.g. IEEE standard. These are mostly
applicable to the requirements for large systems
engineering projects.

The structure of a requirements document
Chapter Description
Preface This should define the expected readership of the document and describe
its version history, including a rationale for the creation of a new version
and a summary of the changes made in each version.
Introduction This should describe the need for the system. It should briefly describe the
system’s functions and explain how it will work with other systems. It
should also describe how the system fits into the overall business or
strategic objectives of the organization commissioning the software.
Glossary This should define the technical terms used in the document. You should
not make assumptions about the experience or expertise of the reader.
User requirements
definition
Here, you describe the services provided for the user. The nonfunctional
system requirements should also be described in this section. This
description may use natural language, diagrams, or other notations that are
understandable to customers. Product and process standards that must be
followed should be specified.
System architecture This chapter should present a high-level overview of the anticipated system
architecture, showing the distribution of functions across system modules.
Architectural components that are reused should be highlighted.
30/10/2014

The structure of a requirements document
Chapter Description
System
requirements
specification
This should describe the functional and nonfunctional requirements in more detail.
If necessary, further detail may also be added to the nonfunctional requirements.
Interfaces to other systems may be defined.
System models This might include graphical system models showing the relationships between
the system components and the system and its environment. Examples of
possible models are object models, data-flow models, or semantic data models.
System evolution This should describe the fundamental assumptions on which the system is based,
and any anticipated changes due to hardware evolution, changing user needs,
and so on. This section is useful for system designers as it may help them avoid
design decisions that would constrain likely future changes to the system.
Appendices These should provide detailed, specific information that is related to the
application being developed; for example, hardware and database descriptions.
Hardware requirements define the minimal and optimal configurations for the
system. Database requirements define the logical organization of the data used
by the system and the relationships between data.
Index Several indexes to the document may be included. As well as a normal alphabetic
index, there may be an index of diagrams, an index of functions, and so on.

Requirements validation

Requirements validation
 Concerned with demonstrating that the requirements
define the system that the customer really wants.
 Requirements error costs are high so validation is very
important
 Fixing a requirements error after delivery may cost up to 100
times the cost of fixing an implementation error.

Requirements checking
 Validity. Does the system provide the functions which
best support the customer’s needs?
 Consistency. Are there any requirements conflicts?
 Completeness. Are all functions required by the
customer included?
 Realism. Can the requirements be implemented given
available budget and technology
 Verifiability. Can the requirements be checked?

Requirements validation techniques
 Requirements reviews
 Systematic manual analysis of the requirements.
 Prototyping
 Using an executable model of the system to check requirements.
Covered in Chapter 2.
 Test-case generation
 Developing tests for requirements to check testability.

Requirements reviews
 Regular reviews should be held while the requirements
definition is being formulated.
 Both client and contractor staff should be involved in
reviews.
 Reviews may be formal (with completed documents) or
informal. Good communications between developers,
customers and users can resolve problems at an early
stage.

Review checks
 Verifiability
 Is the requirement realistically testable?
 Comprehensibility
 Is the requirement properly understood?
 Traceability
 Is the origin of the requirement clearly stated?
 Adaptability
 Can the requirement be changed without a large impact on other
requirements?

Requirements change

Changing requirements
 The business and technical environment of the system
always changes after installation.
 New hardware may be introduced, it may be necessary to
interface the system with other systems, business priorities may
change (with consequent changes in the system support
required), and new legislation and regulations may be introduced
that the system must necessarily abide by.
 The people who pay for a system and the users of that
system are rarely the same people.
 System customers impose requirements because of
organizational and budgetary constraints. These may conflict
with end-user requirements and, after delivery, new features may
have to be added for user support if the system is to meet its
goals.

Changing requirements
 Large systems usually have a diverse user community,
with many users having different requirements and
priorities that may be conflicting or contradictory.
 The final system requirements are inevitably a compromise
between them and, with experience, it is often discovered that
the balance of support given to different users has to be
changed.

Requirements evolution

Requirements management
 Requirements management is the process of managing
changing requirements during the requirements
engineering process and system development.
 New requirements emerge as a system is being
developed and after it has gone into use.
 You need to keep track of individual requirements and
maintain links between dependent requirements so that
you can assess the impact of requirements changes.
You need to establish a formal process for making
change proposals and linking these to system
requirements.

Requirements management planning
 Establishes the level of requirements management detail
that is required.
 Requirements management decisions:
 Requirements identification - Each requirement must be uniquely
identified so that it can be cross-referenced with other requirements.
 A change management process - This is the set of activities that
assess the impact and cost of changes. I discuss this process in
more detail in the following section.
 Traceability policies - These policies define the relationships between
each requirement and between the requirements and the system
design that should be recorded.
 Tool support - Tools that may be used range from specialist
requirements management systems to spreadsheets and simple
database systems.

Requirements change management
 Deciding if a requirements change should be accepted
 Problem analysis and change specification
• During this stage, the problem or the change proposal is analyzed
to check that it is valid. This analysis is fed back to the change
requestor who may respond with a more specific requirements
change proposal, or decide to withdraw the request.
 Change analysis and costing
• The effect of the proposed change is assessed using traceability
information and general knowledge of the system requirements.
Once this analysis is completed, a decision is made whether or not
to proceed with the requirements change.
 Change implementation
• The requirements document and, where necessary, the system
design and implementation, are modified. Ideally, the document
should be organized so that changes can be easily implemented.

Key points
 Requirements for a software system set out what the
system should do and define constraints on its operation
and implementation.
 Functional requirements are statements of the services
that the system must provide or are descriptions of how
some computations must be carried out.
 Non-functional requirements often constrain the system
being developed and the development process being
used.
 They often relate to the emergent properties of the
system and therefore apply to the system as a whole.

Key points
 The requirements engineering process is an iterative
process that includes requirements elicitation,
specification and validation.
 Requirements elicitation is an iterative process that can
be represented as a spiral of activities – requirements
discovery, requirements classification and organization,
requirements negotiation and requirements
documentation.
 You can use a range of techniques for requirements
elicitation including interviews and ethnography. User
stories and scenarios may be used to facilitate
discussions.

Key points
 Requirements specification is the process of formally
documenting the user and system requirements and
creating a software requirements document.
 The software requirements document is an agreed
statement of the system requirements. It should be
organized so that both system customers and software
developers can use it.

Key points
 Requirements validation is the process of checking the
requirements for validity, consistency, completeness,
realism and verifiability.
 Business, organizational and technical changes
inevitably lead to changes to the requirements for a
software system. Requirements management is the
process of managing and controlling these changes.

Chapter 4 – Requirements Engineering
Software Engineering
Mutah University
Faculty of IT, Department of Software Engineering
Dr. Ra’Fat A. AL-msie’deen
https://sites.google.com/site/ralmsideen/
rafatalmsiedeen@mutah.edu.jo

Software Engineering - Chapter 4 - Requirements engineering

More Related Content

What's hot (20)

Similar to Software Engineering - Chapter 4 - Requirements engineering (20)

More from Ra'Fat Al-Msie'deen (20)

Recently uploaded (20)

Software Engineering - Chapter 4 - Requirements engineering