The Cancer Full Presets

Spooky2
The Cancer Full Presets
Our Users & Team

Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Spooky2 has new full presets for the Plasma Plus, Contact Plus 2, and
Contact Plus 4 methods of the Cancer Protocol. Here's a brief overview of
the changes from the Cancer Protocol Jun 5 2016.
The multitasking of Generator 1 in the Plasma Plus and Contact Plus 2
protocols is optional. You can multitask Generator 1 if you are willing to swap
cables, but this is not necessary. In general, where Generator 1 was cable
swapped to run the Remote, those sets have been migrated to Generator 2.

 Plasma Plus, Phase 1, Generator 2
 Plasma Plus, Phase 1a (stuff between Phase 1 and Phase 2), Generator 2
 Contact Plus 4, all of Phase 1, Phase 2 Generators 2-4
 Contact Plus 2, all of Phase 1
What's the Same

Plasma Plus, Phase 1, Generator 1 - the preset only has the Spooky Central
Sets. If the user wants to utilize Generator 1 when the plasma is not running,
they can simply load the "Cancer Phase 1 Generator 2 (Spooky Central)"
preset for Generator 1, and skip to the appropriate location.
The same is true for Plasma Plus, Phase 1a, Generator 1.
What's Different

Plasma Plus, Phase 2, Generator 1 - the preset does not include the
biofeedback scan or targeted cancer sets, these are provided by the user
and the user builds their own preset for these.
Plasma Plus, Phase 2, Generator 2 - all the Remote sets that were on
Generator 1 is now incorporated into Generator 2.

Contact Plus 4, no preset is provided for Phase 2 Generator 1. The user is to
provide these preset via the biofeedback and targeted cancer sets.
Contact Plus 2 Phase 2 Generator 1, only contains the non biofeedback non
targeted sets.
Contact Plus 2 Phase 2 Generator 2 contains the Remote sets that were
originally on Generator 1.

The Preset List
Here are the preset names:
Contact2-01 Gen1 (R) - BY
Plasma2-01 Gen1 (P) - BY

Cancer Protocol with Plasma Plus
Plasma Plus Step 1

In Step 1, on Generator 1, for the first 15 days, run Plasma2-01 Gen1 (P) - BY,
but jump to the frequency set for that day given in the table above. After a 3
hour treatment, Spooky beeps for 3 minutes signaling the end of the treatment.
If you want to take further advantage of your generator after the Plasma
treatment ends, you can disconnect the plasma, and connect the remote to
generator 1, and then load Plasma2-01 Gen2 (R) - BY, and skip to frequency
set that corresponds to the day of the treatment.

Plasma Plus Step 2

In Step 2, on Generator 1, for the next 3 days, run Plasma2-02 Gen1 (P) - BY,
but jump to the frequency set for that day given in the table above. After a 3
hour treatment, Spooky beeps for 3 minutes signaling the end of the treatment.
If you want to take further advantage of your generator after the Plasma
treatment ends, you can disconnect the plasma, and connect the remote to
generator 1, and then load Plasma2-02 Gen2 (R) - BY, and skip to frequency
set that corresponds to the day of the treatment.

Plasma Plus Step 3

The following pertains to Generator 1. On days 1-6, the first treatment of the
day is My Scan. On days 2,4,6, the second treatment is My Target. On days
1-7, the subsequent treatments are listed in the table above. When running
a treatment from the preset, skip to the treatment listed in the table above.
After the 3 hour treatment is over, Spooky beeps to let you know the
treatment is over.

Contact Plus 4 Step 1
Cancer Protocol with Contact Plus 4

Contact Plus 4 Phase 2

The preset Contact4-02 Gen1 (R) - BY has no frequency sets, it only
contains a note that describes the following. On days 9-15, run My Scan,
which is the results of a biofeedback session, and then run My Target,
which is a frequency set you create that targets your specific cancer.

Cancer Protocol with Contact Plus 2

The following pertains to Generator 1. On days 15-21, the first treatment of the
day is My Scan, the second treatment is My Target. The subsequent
treatments are listed in the table above. When running a treatment from the
preset, skip to the treatment listed in the table above. After the 3 hour
treatment is over, Spooky beeps to let you know the treatment is over.

Thank you!

The Cancer Full Presets

More Related Content

Similar to The Cancer Full Presets (7)

More from Spooky2 Rife (20)

Recently uploaded (20)

The Cancer Full Presets