The Case StudyMany disciplines use various forms of the ca.docx

The Case Study
Many disciplines use various forms of the case study to examine
an individual or phenomenon within a specified context. The
approach and application of case study designs also can vary
widely between various disciplines such as medicine, law, and
the social sciences. However, in the social and behavioral
sciences, case studies are often referred to
as uncontrolled studies. Yin (2013) defined the case study as an
empirical inquiry that investigates a phenomenon within its
real-world context, when the boundaries between phenomena
and context are not clearly evident, in which multiple data
sources are used. Yin referred to the case study as a “method”
as opposed to confining it to only an approach or a “tradition”
within the various forms of qualitative research (e.g., Creswell,
2012). Generally, the focus of the case study is on developing a
narrative or revealing a phenomenon based on an in-depth, real-
time, or retrospective analysis of a case. Therefore, issues
related to experimental control and internal validity are
nonfactors within this approach. Although case studies do not
infer causation and the results should not be generalized, the
findings can provide rich insight toward phenomena and serve
as support for theories and the generation of hypotheses.
However, if desired, Yin does offer approaches and models for
researchers interested in attempting to infer causation from case
study designs (which differs from QCA analysis).
The emphasis in a case study is primarily the qualitative
method; however, cross sections of quantitative data are usually
collected as supplementary data throughout the analyses (see
mixed method embedded case study design). The label of case
study is often applied to many social science examinations as a
catchall term, many times misapplying the concept (Malcolm,

2010). However, the case study design can be applied to any of
the approaches within the qualitative method, such as the most
commonly applied narrative and phenomenological approach in
psychology (Singer & Bonalume, 2010a) or the ethnographic
approach in education (Creswell, 2014). Creswell took a
different angle than Yin (2013) regarding the type and
description of designs for the case study. Gall, Gall, and Borg
(2007) succinctly described a case study “as (a) the in-depth
study of (b) one or more instances of a phenomenon (c) in its
real-life context that (d) reflects the perspective of the
participants involved in the phenomenon” (p. 447).
Confusion does arise when authors use different terminology for
similar constructs. These semantic differences can be seen in
the work of Yin, who uniquely defined and applied the
terms holistic and embedded (see Appendix B) differently than
their traditional uses; for example, the term embedded has an
entirely different meaning when used by Creswell. Another
example of this is the term case study design, used within the
qualitative method and most often associated with the
ethnographic and phenomenological approaches. However, the
case study can also be applied to the narrative approach and
arguably any other approach within the qualitative method, as
long as the “case” being explored is bound by time, place,
person, or environment. When deciding to use a case study, we
refer the reader to Yin’s (2004, 2012, 2013) books for a review
of his unique and widely accepted approach to the case study.
See Appendix B for a list of case study designs defined by Yin
(2013) and Creswell (2014).
Recommended programs for qualitative data analyses:
ATLAS/TI, The Ethnograph, HyperRESEARCH, NVivo,
NUD*IST, SPSS Text Analysis for Surveys™
We refer the reader to the following books and book chapter for
further details regarding qualitative methods:
· Creswell, J. W. (2012). Qualitative inquiry and research
design: Choosing among five approaches (3rd ed.). Thousand
Oaks, CA: Sage.

· Lincoln, Y. S., Linham, S. A., & Guba, E. G. (2011).
Paradigmatic controversies, contradictions, and emerging
influences., revisted. In N. K. Denzin & Y. S. Lincoln
(Eds.), The SAGE handbook of qualitative research (4th ed.),
pp. 191–215. Thousand Oaks, CA: Sage.
· Wertz, F. J., Charmaz, K., McMullen, L. M., Josselson, R.,
Anderson, R., & Emalinda, M. (2011). Five ways of doing
qualitative analysis: Phenomenological psychology, grounded
theory, discourse analysis, narrative research, and intuitive
inquiry. New York, NY: Guilford Press.
Chapter 11 Grounded Theory Perspective
The grounded theory approach was first developed by Glaser
and Strauss (1967) as a way to generate a theory based on data
that are systematically gathered and analyzed. In general, this is
an inductive process in which the theoretical propositions are
not presented a priori; rather, the theory emerges from the data
that are being collected. However, this process often becomes
abductive, with testing of the theory occurring as it emerges
from the data. The emerging theory is constantly being
compared to the evidence brought forth from new data that are
analyzed, as in the “constant comparative method.” The use
of memoing (i.e., the process of recording the personal thoughts
and ideas of the researcher throughout the data collection
procedures) is critical when using a systematic, emerging, or
constructivist design. Qualitative researchers often use
memoing to help make conceptual links between raw data and
abstractions to better explain the phenomena being studied
within its appropriate context. See Birks, Chapman, and Francis
(2008) for an in-depth discussion of memo-writing techniques.
According to Corbin and Strauss (2015), a good grounded
theory should (a) fit the phenomenon; (b) provide
understanding; (c) provide generality, in that the theory
includes extensive variation and is abstract enough to be
applicable to a wide variety of contexts; and (d) provide
control, in the sense of stating the conditions under which the
theory applies and describing a reasonable basis for

action.Systematic Design
· The systematic design is the most structured of the grounded
theory approaches, with rigid procedures and a preconceived
framework for categories. This design emphasizes theory
verification based on the theory that is generated (i.e.,
inductive-deductive process). The design uses the three-stage
coding method (open, axial, and selective) to help generate a
visual depiction of a theory.Emerging Design
The emerging design is also a theory generation design;
however, it is less prescriptive than the systematic design. This
design allows the theory to emerge “naturally” from the data.
The key components of this design are fit, work, relevance, and
modifiability.Constructivist Design
The constructivist design further distances itself from the
procedurally laden systematic design, stressing the role of the
researcher as an active participant who interacts with the field
being explored. Constructivist researchers are interested in the
co-construction of knowledge between researcher and
participant and embrace and explore the inherent biases within
this interaction. This design recognizes that knowledge
emerging from the data is not only “discovered” but also
created. It is important to be cognizant of the assumptions
brought to the investigation by the researcher. Also, one should
be aware of the socially constructed meanings that occur during
the collection of data and those socially constructed meanings
that were in place prior to engaging with the participant.When
to Use Grounded Theory
· To build/discover theory inductively
· To build/discover substantive and/or formal theory
· When there is little or no prior information on an area or
phenomenon
· To study the microcosm of interaction
We refer the reader to the following books for further details
regarding the grounded theory approach:
Charmaz, K. (2014). Constructing grounded theory: A practical
guide through qualitative analysis (2nd ed.). London, England:

Sage.
Corbin, J., & Strauss, A. (2015). Basics of qualitative research:
Techniques and procedures for developing grounded theory (4th
ed.). Thousand Oaks, CA: Sage.
Glaser, B. G., & Strauss, A. (1967). The discovery of grounded
theory: Strategies for qualitative research. Hawthorne, NY:
Aldine Transaction.
Figure 11.1 Systematic Design
Example for Figure 11.1
Han, G. S., & Davies, C. (2006). Ethnicity, health and medical
care: Towards a critical realist analysis of general practice in
the Korean community in Sydney. Ethnicity and Health, 11(4),
409–430.
Research Question: What are the general practitioners’ views on
the health of Koreans and the complex process of providing and
seeking effective and satisfactory medical care?
Procedures: This study investigated the use and provision of
biomedicine among men on the basis of interview data from
eight doctors. Semistructured interview schedules were prepared
around the doctors’ Chapter 12 Ethnographic Perspective
Ethnography is an approach that was developed to describe
cultures; this includes any culture that shares group
characteristics such as values, beliefs, or ideas. The
ethnographic researcher is interested in understanding another
way of life from the point of view of the participants who make
up the culture or group being studied. Because this perspective
is based on understanding anything associated with human
behavior and belief, it is well-suited for the fields of education
and the social and behavioral sciences, including more recent
areas of study like the research of culture and its relation to the
Internet (see Hine, 2015).
Ethnography can be defined as research designed to describe
and analyze the social life and culture of a particular social
system, based on detailed observations of what people actually

do. The researcher is embedded within the culture and takes a
firsthand account of the beliefs, motivations, and behaviors of
the individuals in the group. The data that are collected are used
to (a) document the lives of the participants within the context
of the culture, (b) understand the experiences of the individuals
within the culture, or (c) interpret the behaviors shaped by the
cultural context.Realist Design
Van Maanen (1988) stressed three aspects of the realist design:
(a) the invisible author (i.e., narrating in third person), (b) thick
descriptions of the mundane (using a system of standard
categories to organize the descriptions), and (c) interpretive
“omnipotence” (i.e., allowing the author the final word in
presenting the culture). The realist design offers one
researcher’s overall perspective of a phenomenon from facts
that are meticulously culled down to support a perspective.
Thus, although the researcher’s duty is to objectively (without
bias) present the facts, ultimately the interpretations of the facts
come from the “omnipotent” researcher. In general, Spradley’s
(1979, 1980) designs are less “narrative” or “literary” than
those of van Maanen (1988) and Geertz (1998).Critical Design
The critical design allows for the critiquing (i.e., challenging
the status quo) of some existing system while maintaining a
level of scientific inquiry. It provides a scientific framework for
advocacy or a structure for directly examining relationships
among cultural features, economic systems, knowledge, society,
and political action. Put simply, Madison (2011) and Thomas
(1993) both asserted that the critical design is used to describe,
analyze, and scrutinize hidden agendas, power centers, and
assumptions that inhibit, repress, and constrain. Thus, the real
utility of a critical design is the structure it provides for
researchers who are interested in explaining some form of
ideology or power relations through the transformation of
meaning and conceptualization of existing social systems.Case
Study Design
The case study design is often used with the ethnographic
perspective; however, it has some distinct differences from

traditional ethnography. While traditional ethnography is
focused on group behavior, the case study design allows for the
investigation of individuals as a whole (Creswell, 2012).1 This
design provides the framework for an in-depth contextual
analysis of a finite number of events or conditions and their
associations. More specifically, the ethnographic case study
allows for the examination of an actual case within some
cultural group. The “case” being explored also can be a group
bound by time, place, or environment (i.e., a group must be
considered a unit, which is more than just a homogenous group).
Researchers interested in exploring activities of a group, rather
than shared patterns of group behavior, should follow this
design.When to Use Ethnography
· Studying a school, organization, or program in-depth
· Studying what people do
· Studying how things work or run
· Studying “insiders”
· Studying aspects of “culture” (e.g., practices, rituals, lives,
interconnections, customs, values, beliefs, everyday life)
regarding the ethnographic approach:
Fetterman, D. M. (2009). Ethnography: Step-by-step (3rd ed.).
Thousand Oaks, CA: Sage.
Madison, D. S. (2011). Critical ethnography: Methods, ethics,
and performance (2nd ed.). Thousand Oaks, CA: Sage.
Makagon, D., & Neumann, M. (2008). Recording
culture. Thousand Oaks, CA: Sage.
Van Maanen, J. (1988). Tales of the field: On writing
ethnography. Chicago, IL: University of Chicago Press.
Purser, G. (2009). The dignity of job-seeking men: Boundary
work among immigrant day laborers. Journal of Contemporary
Ethnography, 38(1), 117–139.
Research Aim: Examine the discourses through which Latino
immigrant day laborers make sense of, and find dignity within,

their ongoing quest for work.
Procedures: The data collection involved ethnographic
fieldwork and interviews with individual day laborers. The
researcher conducted a total of 22 in-depth, loosely structured
interviews with day laborers, 10 of whom regularly sought work
out of the employment center and
Chapter 13 Narrative Perspective
The narrative approach involves gathering information, in the
form of storytelling by the participant, for the purpose of
understanding a phenomenon. Humans are storytelling beings by
nature; we lead storied lives, both individually and collectively.
Ultimately, the narrative approach is most widely used in the
disciplines of psychology and psychiatry and is the study of the
multitude of ways humans experience the world. Specifically,
this approach involves collaboration between the researcher and
participant, as a way to understand phenomena through stories
lived and told. The narrative design involves (a) the exploration
of a single participant or a small sample of participants, (b)
gathering data through the collection of stories, (c) retelling the
stories (restorying), and (d) reviewing the story with the
participant to help validate the meaning and subsequent
interpretation. The narrative design can be either biographical
or autobiographical.
Dialogic listening skills are essential to the narrative approach;
this type of “listening” is used throughout the whole process, as
the researcher gathers data through conversations and engaged
interchanges of ideas and information with the participant(s).
The narrative approach can be conceptualized as descriptive,
explanatory, or critical by design and follows the “underlying
assumptions that there is neither a single, absolute truth in
human reality nor one correct reading or interpretation of a
text” (Polkinghorne, 1988, p. 2). There is also a structural
approach in the way individual stories are studied (Riessman,
2007).
Dan McAdams (creating self in narrative) and Jefferson Singer
(explanatory potential of the life story) have had a profound

influence on the development and use of the narrative approach
within the social and behavioral sciences. McAdams, Josselson,
and Lieblich’s (2006) contributions included (a) the Life Story
Interview method, (b) the Guided Autobiography, (c) the Loyola
Generativity Scale, and (d) a set of coding manuals to analyze
the stories of research participants. Singer’s (1997)
book Message in a Bottle focused on men whose addictions
were resistant to the traditional 12-step method and served as an
excellent exemplar of the narrative approach. Singer also used
the explanatory potential of the life story of individuals within
the therapeutic context (see Singer & Bonalume, 2010a and
2010b, for more on autobiographical narrative approaches for
case studies in psychotherapy).Descriptive Design
The descriptive design involves the description of any one or
more of the following: (a) individual or group narratives of life
stories or specific life events, (b) the conditions or contextual
factors supporting the story, (c) the relationship between
individual stories and the culture the stories are embedded
within, and (d) how certain life events impact the participants’
story line. Thus, the descriptive design is used to explore the
status of some phenomenon and to describe what exists with
respect to the individual, group, or condition.Explanatory
Design
The explanatory design is used to provide an account of some
phenomenon by means of why something happened. Thus, the
explanatory design is used to explore the causes and reasons of
phenomena.Critical Design
Van Maanen (1988), in his book on ethnography, discussed the
use of “critical tales.” These critical tales are conceptualized as
narrative approaches using a critical framework. A critical tale
may illuminate individual experiences as well as larger social,
political, symbolic, or economic issues. Thus, the critical design
within the narrative approach involves the same structure or
framework as the critical design within the ethnographic
approach. Ultimately, this design allows for the critiquing of
some existing system while maintaining a level of scientific

inquiry.When to Use Narrative Inquiry
· Telling stories about stories
· Exploring identity and conflict
· Examining the structure of experience
· Focusing on how people create meaning in their lives
· Exploring the interaction of individual stories with cultural
narratives
regarding the narrative approach:
Clandinin, D. J., & Connelly, F. M. (2004). Narrative inquiry:
Experience and story in qualitative research. San Francisco,
CA: Wiley.
Lieblich, A., Tuval-Mashiach, R., & Zilber, T. (1998). Narrative
research: Reading, analysis, and interpretation. Thousand Oaks,
CA: Sage.
Riessman, C. K. (2007). Narrative methods for the human
sciences. Thousand Oaks, CA: Sage.
Lapadat, J. C. (2004). Autobiographical memories of early
language and literacy development. Narrative Inquiry, 14(1),
113–140.
Research Aim: To explore adults’ memories of their own
acquisition of language and literacy learning
Procedures: Participants kept a journal in which they made
regular entries over the semester, reflecting on their own
personal history of learning language and literacy from the
preschool years through the end of adolescence. The
participants were asked to recall personally significant events,
situations, and people that made a difference to their learning,
as well as
Chapter 14 Phenomenological Perspective
Phenomenology, put simply, is the description of an
individual’s immediate experience. The phenomenological
approach was born out of Edmond Husserl’s philosophical
position that the starting point for knowledge was the self’s

experience of phenomena, such as one’s conscious perceptions
and sensations that arise from life experience. From this
philosophy emerged the modern-day phenomenological
approach to research with the goal of understanding how
individuals construct reality. Researchers use the
phenomenological approach when they are interested in
exploring the meaning, composition, and core of the lived
experience of specific phenomena. The researcher explores the
conscious experiences of an individual in an attempt to distill
these experiences or get at their essence.Existential Design
The aim is to illuminate the essential general meaning structure
of a specific phenomenon, with a focus on grasping the whole
meaning of the experience, instead of dividing it into parts.
Researchers using the existential design move from the concrete
description of the experience of a given participant (co-
researcher) to the interpretation of said experience. The
participants (co-researchers) are asked for a description of their
concrete experiences. The ultimate goal is to comprehend
human experience as it is actually lived in the “real world”
rather than in some artificial environment (von Eckartsberg,
1997).
Basic themes of existential phenomenology are (a) lived
experience, (b) modes of being, and (c) ontology (the study of
the nature of being, existence, or reality). In fact, the existential
phenomenology associated with Heidegger’s philosophy is often
referred to as ontological phenomenology, as it is primarily
concerned with “being.” This differs from transcendental
phenomenology, which is most associated with Husserl’s
epistemological philosophy (concerned with
knowledge).Transcendental Design
Some key tenets of the transcendental design are (a)
intentionality (consciousness is always intentional), (b) eidetic
reduction (researcher accesses the consciousness of the
participant to get at the pure essence of some phenomenon, thus
revealing the essential structure), and (c) constitution of
meaning (returning to the world from consciousness). This

design is descriptive in nature, as it is through analysis and
description of how things are constituted in, and by,
consciousness that allows us to understand various phenomena.
This design is useful for researchers who are interested in
gathering data to grasp the essence of the human
experience.Hermeneutic Design
Some key tenets of the hermeneutic design are (a)
interpretation, (b) textual meaning, (c) dialogue, (d) pre-
understanding, and (e) tradition. The hermeneutic design
deviates from the descriptive nature of which the
phenomenological approach is most often associated. This
design has a strong focus on reflective interpretation, made
evident by Heidegger, who asserted that description is
inextricably linked to interpretation. Essentially, this design is
based on the fundamental theory that all forms of human
awareness are interpretive.Case Study Design
The case study design is also often used with the
phenomenological perspective. This design lends itself well to
the exploration of meaning of a lived experience of some
phenomenon. This design provides the framework for an in-
depth analysis of a finite number of participants. Researchers
interested in exploring activities of an individual or small
group, rather than the shared patterns of group behavior, should
follow this design.When to Use Phenomenology
· Studying people’s experiences
· Studying how people make meaning in their lives
· Studying relationships between what happened and how people
have come to understand these events
· Exploring how people experience the essence of a particular
phenomenon
· Examining the commonalities across individuals
regarding the phenomenological approach:
Smith, J. A., Flowers, P., & Larkin, M. (2009). Interpretive
phenomenological analysis: Theory, method, and
research. Thousand Oaks, CA: Sage.

Vagle, M. D. (2014). Crafting phenomenological research.
Walnut Creek, CA: Left Coast Press.
van Manen, M. (2014). Phenomenology of practice: Meaning-
giving methods in phenomenological research and writing.
Walnut Creek, CA: Left Coast Press.
Smith, M. E. (2007). Self-deception among men who are
mandated to attend a batterer intervention
program. Perspectives in Psychiatric Care, 43(4), 193–203.
Research Aim: Gain an understanding of the perceptions of
perpetrators of intimate partner violence (IPV) prior to
beginning a Batterers’ Intervention Program (BIP).
Procedures: Qualitative methods used in this study were
conducted according to the existential-phenomenological
method outlined by Pollio, Henley, and Thompson (1997). The
method of existential phenomenology was used in this study to
provide men the opportunity to describe their perceptions
concerning the meaning attached to being mandated to attend a
BIP.
Part IV Mixed Methods
This part includes four popular approaches to mixed methods,
followed by some of the associated basic designs (accompanied
by brief descriptions of published studies that use the design).
Most of the diagrams of mixed method designs were compiled
and adapted from two major sources (Creswell & Plano Clark,
2011; Tashakkori & Teddlie, 2010a). Visit the companion
website at study.sagepub.com/edmonds2e to access valuable
instructor and student resources. These resources include
PowerPoint slides, discussion questions, class activities, SAGE
journal articles, web resources, and online data sets.
Mixed methods examinations combine various aspects of
quantitative and qualitative methods (often referred to as
quantitative and qualitative strands). Because this type of
methodology mixes both the quantitative and qualitative

method, the logic of inquiry may include the use of induction,
deduction, and abduction. This approach allows researchers to
further examine constructs at a “deeper” level, where the
quantitative strand reveals what the qualitative strand leaves out
and vice versa. From a philosophical viewpoint, a link has been
established between pragmatism and mixed methods. That is,
this method was developed as an attempt to legitimatize the use
of multiple methodological strategies when answering research
questions within a single study, which is considered a more
practical approach to research. To conduct a sound mixed
method study, it is critical that the researcher has a firm
understanding of the distinguishing characteristics of
quantitative methods (deduction, confirmation, hypothesis
testing, explanation, prediction, standardized data collection,
and statistical analysis) and qualitative methods (induction,
discovery, exploration, theory generation, researcher as an
instrument of data collection, and qualitative analysis). The
mixed method includes the collection and analyses of
quantitative (closed-ended and numerical) and qualitative
(open-ended and textual) data (i.e., a quantitative and
qualitative research question must be posed, individually
analyzed and interpreted, and followed up with an overall
interpretation).
Creswell and Plano Clark (2011) noted that one of the primary
objectives in designing a mixed method study is to determine if
the design should be fixed or emergent. Specifically, a fixed
mixed method design is applied when the researcher
predetermines the application and integration of a qualitative
and quantitative method within a study. On the other hand, an
emergent design is conducted when a researcher decides to
include a qualitative or quantitative strand within an ongoing
examination, purely based on necessity. The presentation within
this guide falls more toward a typology-based approach—that
is, we emphasize the various designs that are classified and
developed for the use and application for mixed methods
studies. Following those tenets, a researcher must consider

many aspects regarding the implementation of a mixed method
study. For example, the priority (or emphasis) of the qualitative
and quantitative strands should be considered. Equal emphasis
can be placed on the qualitative and quantitative method, or one
strand can take priority over the other. The timing of the strands
is also relevant. The strands can be implemented concurrently,
sequentially, nested (embedded), or multilayered. The mixing of
the strands should also be considered, which can happen during
the interpretation phase, data collection, data analysis, or at the
level of the design.
Philosophically speaking, although mixed methods studies are
considered pragmatic, researchers should still be cautious when
using the typology-based approach to mixed method research
(Collins & O’Cathain, 2009). Many of the “established” mixed
methods designs may not fully address the needs of the variety
of research scenarios across the various disciplines. Therefore,
a more general or generic approach may be warranted.
Tashakkori and Teddlie (2010a) produced a sound matrix of the
various mixed methods designs, which is summarized
in Appendix C. However, most of the designs presented within
this part follow Creswell and Plano Clark’s (2011) design
typology. Within their book, they referred to these designs
as variants. In addition, in an earlier version of their text, they
referred to these designs as models, many with different names
than those seen in their more recent text.
Mixed Methods Legend
The following notations are used in the depiction of the various
mixed methods approaches and designs:
Chapter 15 Convergent-Parallel Approach
The convergent-parallel approach is a concurrent approach and
involves the simultaneous collection of qualitative and
quantitative data (usually both QUAL and QUAN are the
emphasis), followed by the combination and comparisons of
these multiple data sources (i.e., the two methods are ultimately

merged). This approach involves the collection of different but
complementary data on the same phenomena. Thus, it is used
for the converging and subsequent interpretation of quantitative
and qualitative data. This approach is often referred to as
the concurrent triangulation design (single-phase) because the
data is collected and analyzed individually but at the same
time.Parallel-Databases Design
The parallel-databases design is structured so the QUAN and
QUAL data are collected separately (not within the same
measures) but at the same time (concurrently). The analyses of
data are also analyzed concurrently. The results are then
converged by comparing and contrasting the data en route to
one overall interpretive framework. This design allows
researchers to validate data by converging the QUAN results
with the QUAL findings. This design is also referred to as
a triangulation design and convergence model, as seen in
Seifert, Goodman, King, and Baxter Magolda’s (2010)
examination.Data-Transformation Design
The data-transformation design allows the researcher to collect
QUAN and QUAL data separately but concurrently. Following
the subsequent analyses, data are transformed by either
transforming QUAN to QUAL or QUAL to QUAN. Therefore,
the data are mixed during this stage, followed by the subsequent
analyses.Data-Validation Design
The validating quantitative data design is used to validate
QUAN data with qual findings. Data from QUAN and qual are
collected together (within the same measures), not separately.
Within this design, the qual findings are not the emphasis;
therefore, they are not subject to rigorous data reduction or
analysis.Multilevel Design
The multilevel design was originally introduced by Tashakkori
and Teddlie (2002). This design allows the researcher to use
different methodological techniques for addressing QUAN and
QUAL data within a system. The QUAN results and QUAL
findings from each level are then merged to provide an overall
interpretation.

Figure 15.1 Parallel-Databases Design
Note: Any research design designated as experimental, quasi-
experimental, or nonexperimental research can be used for the
QUAN phase, and any approach designated under the qualitative
method can be used for the QUAL phase.
Hall-Kenyon, K. M., Bingham, G. E., & Korth, B. B. (2009).
How do linguistically diverse students fare in full- and half-day
kindergarten? Examining academic achievement, instructional
quality, and attendance. Early Education and Development,
20, 25–52.
Research Questions
· Quantitative: What are the effects of instructional quality on
academic achievement (math and literacy)?
· Qualitative: What are teacher and administrator perceptions of
full- and half-day programs, and how do teachers’ instructional
behaviors influence academic achievement?
· Mixed Method: To what extent do the QUAN data and QUAL
data converge?
Procedures
· Quantitative: Eight kindergarten classrooms were used—four
full-day classrooms and four half-day classrooms. The four
kindergarten classrooms from the treatment school were in the
first year of implementing a full-day pilot program. The four
classrooms were receiving a half-day program as usual.
Students’ academic achievement was assessed prior to and at
the Chapter 16 Embedded Approach
The embedded approach is a nested approach and is used when
one type of data (QUAN or QUAL) is most critical to the
researcher. This approach is used when different questions
require different types of data (qualitative and quantitative).
The embedded approach is appropriate when one type of data
clearly plays a secondary role and would not be meaningful if

not embedded within the primary data set. The embedded
approach is also useful when the researcher logistically cannot
place equal priority on both types of data or simply has little
experience with one of the forms of data. Many variants of the
embedded approach have been proposed, such as the embedded
narrative and ethnographic designs. For many years, clinical
psychologists have used a form of the embedded narrative case
study design for cases classified in abnormal psychology (see
Oltmanns et al., 2014)—that is, a clinician would collect
relevant quantitative indices and qualitative data and develop a
cohesive narrative account, explaining the clinical features of
the individual case. Based on theoretical and logistical
considerations, many other design variants of the embedded
approach can be meshed with many of the traditional designs
presented in this book. These are sometimes referred to as
hybrid designs.Embedded-Experiment Design
The embedded-experiment design allows the researcher to
embed qual data within experimental research. If the research is
considered quasi-experimental, then the design can be referred
to as an embedded quasi-experimental design. The researcher
can use any research design that is designated as such (i.e.,
within- or between-subject approaches). This model can be
further designated as one-phase, which allows the researcher to
collect the qual data during the intervention, or two-phase, in
which the researcher collects qual data before and after the
experimental or quasi-experimental phase.Embedded-
Correlational Design
The embedded-correlational design allows the researcher to
embed qual data within nonexperimental research (observational
approach). The designs can be either predictive or explanatory.
QUAN data is the emphasis within this design.Embedded Case
Study Design
The embedded case study design can be applied as a means to
explore a phenomenon within its real-world context when the
boundaries between phenomena and context are not clearly
evident in which multiple data sources and types (QUAL and

quan) are used. QUAL data is the emphasis, while the quan data
provides a supplementary role to the qualitative findings. An
ethnographic or narrative approach is commonly applied to
guide the tenets of the case study design.
Figure 16.1 Embedded-Experiment Design (One-Phase)
Note: Any research design designated as a between-subjects or
repeated-measures approach can be used for the QUAN phase,
and a cross section of qualitative data can be collected for the
qual phase.
Zydney, J. M. (2008). Cognitive tools for scaffolding students
defining an ill-structured problem. Journal of Educational
Computing Research, 38(4), 353–385.
Research Questions
· Quantitative and Qualitative: What is the effect of cognitive
tools in scaffolding students defining an ill-structured problem,
as measured by (a) students’ problem understanding, (b) ability
to generate questions, and (c) ability to formulate hypotheses on
how to solve the problem?
· Mixed Method: How do the qual results inform the
development of the treatment? What additional information is
obtained during the trial from the qual data? How do the qual
results expand on the QUAN data?
Procedures: During the first session, students were introduced
to the project and completed the fluency test. During the second
session, students met Chapter 17 Explanatory-Sequential
Approach
The explanatory-sequential approach is a sequential approach
and is used when the researcher is interested in following up the
quantitative results with qualitative data. Thus, the qualitative
data is used in the subsequent interpretation and clarification of
the results from the quantitative data analysis. In many
instances, because the QUAN design is the emphasis, a generic

qual design is used in explanatory approaches. This two-phase
approach is particularly useful for a researcher interested
in explaining the findings from the first phase of the study with
the qualitative data collected during Phase 2. However, either
the qualitative or quantitative data (or both equally) may be the
primary focus of the study (see introductory figure). For
example, the qualitative phase is often emphasized when using
the participant-selection design.Follow-Up Explanations Design
The follow-up explanations design provides a framework for the
researcher to collect qual data in order to expand on the QUAN
data and results. Within this design, a researcher analyzes the
relevant QUAN results and then uses the qual findings to
further explain the initial QUAN results. Thus, the primary
emphasis is on the QUAN results.Participant-Selection Design
The participant-selection design involves a two-phase process:
First, the participant selection (Phase 1) is conducted using a
quantitative method, followed by a qualitative data collection
phase (Phase 2). Participants are selected during the first phase
based on parameters set a priori by the researcher as a means of
purposeful sampling. Thus, the quan phase is strictly used to
generate the sample.
Figure 17.1 Follow-Up Explanation Design
Note: Any research design designated as experimental, quasi-
experimental, or nonexperimental research can be used for the
initial QUAN phase of this design, and cross sections of
qualitative data can be collected for the qual phase.
Lee, K. S., Osborne, R. E., Hayes, K. A., & Simoes, R. A.
(2008). The effects of pacing on the academic testing
performance of college students with ADHD: A mixed methods
study. Journal of Educational Computing Research, 39(2), 123–
141.
Research Questions
· Quantitative and Qualitative: What is the relationship between

computer-paced and student-paced item presentation on the
academic test performance in college students diagnosed with
attention-deficit/hyperactivity disorder (ADHD)?
· Mixed Method: In what ways do the qual data help to explain
the QUAN results?
Procedures: Participants were randomly assigned to one of two
treatment conditions. In the computer-paced testing condition,
the students were allowed 90 seconds per question and were
forced to move on to the next question when the time expired.
In the student-paced testing condition, students were allowed an
average of 90 seconds per question but were not forced to move
on to the next question. Upon completion of either the
computer-paced or student-paced test, each participant was
individually interviewed face to face by the primary
investigator to explore the student’s perception of the testing
experience.
This exploratory study used a follow-up explanation with quasi-
experimental design (QUAN) to explore and explain the effects
of paced-item presentation for college students diagnosed with
ADHD. The goal was to analyze two testing conditions and
interpret their impact on a small number of participants who
participated in the study.
Figure 17.2 Participant-Selection Design
Note: Cross sections of quantitative data can be collected for
the initial quan phase, and any approach and design designated
under the qualitative method can be used for the QUAL phase.
Chapter 18 Exploratory-Sequential Approach
The exploratory-sequential approach is a sequential approach
and is used when the researcher is interested in following up
qualitative findings with quantitative analysis. This two-phase
approach is particularly useful for a researcher interested in
developing a new instrument, taxonomy, or treatment protocol
(Creswell & Plano Clark, 2011). The researcher uses the
qualitative (exploratory) findings from the first phase to help

develop the instrument or treatment and then tests this product
during the second phase (quantitative). In general, when
variables are unknown, this approach is useful to identify
important variables (Phase 1) for subsequent quantitative
analysis (Phase 2). It is also a useful approach for revising
existing instruments and treatment protocols, as well as for
developing and testing a theory. Although the QUAL phase is
usually the primary focus, either the qualitative or quantitative
phase (or both equally) may be the primary emphasis of the
study (see introductory figure).Instrument-Development Design
The instrument-development design is often QUAN emphasized
and provides a framework for the researcher to first develop and
then test (psychometrically) an instrument on a specific
population. With this design, the researcher uses the qualitative
results to help construct the instrument and validates the
instrument during the subsequent quantitative phase. Either the
qualitative or quantitative data (or both equally) may be the
primary emphasis of the study.Theory-Development Design
The theory-development (and taxonomy-development) design is
often QUAL emphasized. The researcher uses the qualitative
data collected during the first phase to identify, develop, and
construct a classification system or theory. The taxonomy or
theory is subsequently analyzed quantitatively during Phase 2.
Oftentimes, researchers will use the qualitative findings to
develop their research questions, which guide the quantitative
phase of the study. Either the qualitative or quantitative data (or
both equally) may be the primary emphasis of the
study.Treatment-Development Design
The treatment-development design is both QUAL and QUAN
emphasized and provides a framework for the researcher to
develop and then test a treatment protocol or approach with a
specific population. With this design, the researcher uses the
qualitative results to help construct the treatment protocol and
then tests the efficacy of the treatment during the subsequent
quantitative phase. Either the qualitative or quantitative data (or
both equally) may be the primary emphasis of the study.

Figure 18.1 Instrument-Development Design
Note: Cross sections of qualitative data can be collected for the
qual phase, and an explanatory design within the observational
approach is typically used for the QUAN phase of this design.
Zolotor, A. J., Runyan, D. K., Dunne, M. P., Jain, D., Petrus, H.
R., Ramirez, C., . . . Isaeva, O. (2009). ISPCAN Child Abuse
Screening Tool Children’s Version (ICAST-C): Instrument
development and multi-national pilot testing. Child Abuse &
Neglect, 33(11), 833–841.
Research Aims and Question
· Phase 1: Develop a child victimization survey.
· Phase 2: Examine the performance of the instrument through a
set of international pilot studies.
· Mixed Method: What items and scales represent the qual
findings?
Procedures: The researchers developed the initial draft of the
instrument after receiving input from scientists and
practitioners representing 40 countries. The original instrument
contained 82 screener questions regarding the potentially
victimizing experiences at home and school or work. Volunteers
from the larger group of scientists participating in the Delphi
review of the ISPCAN Child Abuse Screen Tool–Parent Version
(ICAST-P) and Retrospective Version (ICAST-R) reviewed the
Children’s Version (ICAST-C) by e-mail in two rounds,
resulting in a final instrument. The ICAST-C was then
translated and back-translated into six languages and field
tested in four countries Chapter 19 Mixed Methods, Case
Studies, and Single-Case Approaches
The primary reason for using mixed methods is to maximize the
use of blending methods to answer research questions within a
study (i.e., converge and confirm results from different
methodological techniques). Keep in mind that the use and
application of mixed methods in education and the social and

behavioral sciences are still relatively new and evolving (see
Tashakkori & Teddlie, 2010b). Many of the designs presented
are difficult to locate in the literature; that is, authors typically
do not indicate the name of the mixed method research design
(or use different names) in their published manuscripts.
Nonetheless, there is a growing interest and need for the
application of mixed methods as a means to reveal complex and
relevant scientific inquiries. There are many applications of
mixed methods not yet identified in the literature or in
textbooks that we propose. Based on our observations in the
field, we recommend combining qualitative methodology with
the family of A-B designs (i.e., the single-case approach).
Developing a structure and framework for mixed method single-
case approaches can strengthen the results from N = 1 designs
en route to implying causal relations.
The mixed method single-case approach still maintains the key
characteristics (as defined by the quantitative methodological
tenets), which are (a) continuous assessment (repeated
measures), (b) baseline assessment, (c) accounting for stability
in performance, and (d) the introduction of varied phases.
However, the qualitative (qual) method should serve as a
secondary role to the quantitative (QUAN) method (i.e., the
emphasis is on the design of the single-case approach). Because
the qualitative method is secondary, a sound generic qualitative
design should usually suffice for these applications. For
example, a cross section of qual data can be collected
concurrently, sequentially, or can be nested (embedded) within
the design. When applying these designs and staying true to the
tenets of mixed methodology, it is critical to discuss how the
qual findings add to, explain, and expand on the QUAN
results.Mixed Method A-B-A Designs
Although we present diagrams of the A-B-A mixed method
design, any version of the A-B family of designs can be used
(e.g., A-B-A-B, A-B-C, multiple baseline, changing criterion,
etc.). Diagram 19.1 is the A-B-A concurrent design. The qual
data is collected concurrently (simultaneously) throughout the

process of the design. Next, Diagram 19.2 illustrates the A-B-A
sequential design. Within this design, qual data is collected
sequentially throughout the various phases of the treatment and
baseline applications. In addition to collecting qual data
between each session, the qual data can also be collected prior
to and after the baseline and follow-up sessions. Last, Diagram
19.3 is an A-B-A nested design. This design allows the
researcher to collect qual data prior to and following the
application of the entire design. See the diagrams for
diagrammatic representations of the mixed methods single-case
approaches. The applications of these designs should always be
based on theoretical and logistical considerations.
Diagram 19.1 A-B-A Concurrent Design
Note: Multiple forms and types of qual data can be collected
during each phase.
Diagram 19.2 A-B-A Sequential Design
Note: A cross section of qual data can be collected at any point
between treatment and baseline phases.
Diagram 19.3 A-B-A Nested Design
Note: A cross section of qual data is collected prior to and
following the completion of the study.
Sequential Case Study Single-Case Design
As seen in Figure 19.1, we propose the application of combining
the case study design and the single-case approach as a means
to provide a truly in-depth and rigorous analysis and assessment
of a single participant (N = 1). This design would be considered
an exploratory approach, and the emphasis would be both on
qualitative (QUAL) and quantitative (QUAN) methods
sequentially delivered. This design is applicable in a wide array
of disciplines, such as education, psychiatry, rehabilitation, and
medicine. The general steps would include, for example, using
the case study approach to detail and reveal the intricate

cognitive and behavioral patterns associated with a child
diagnosed with a pervasive developmental disorder. For
example, information gathered from the case study can be
applied to a form of cognitive behavioral therapy and the effects
assessed through the use of an A-B-A design. As with all mixed
methods studies, the results from the case study and A-B-A
design should be analyzed and discussed individually and
collectively.
Figure 19.1 Sequential Case Study Single-Case Design
Note: Any version of the case study (see Appendix B) can be
used as defined by Yin (2013) or Creswell (2014), and any
version of the A-B family of designs can be used.
Chapter 20 Action Research Approaches
The action research approach is a form of research that enables
individuals to reveal functional solutions to problems
encountered in the context in which they operate or work. The
general framework (which can be likened to the scientific
method) includes a cyclical approach, starting with the
identification of the problem, data collection, analysis, and then
a feedback phase. Chevalier and Buckles (2013) discussed
action research as a spiral of activity, including the phases
of plan, act, observe, and reflect. Stringer (2013) presented the
action research model in three phases: look, think, and act.
Action research is best suited for educational, health, and
community organizations in which the intent is to generalize the
findings back to the sample and context where the research
takes place, as opposed to extending the findings to the
population. We would like to point out that many texts on
action research claim that action research is not like traditional
scientific inquiry because the findings are not intended to be
generalized (i.e., external validity) to populations outside of the
research focus. However, the traditional application of the
scientific method and experimental research is primarily
intended to ensure aspects of internal validity (i.e., the findings
can be attributed to the program or treatment).

We have also found in reviewing many action research texts that
authors provide the general cyclic framework for action
research then discuss a mixed bag of quantitative and
qualitative data collection strategies as a means to answer (or
solve) the stated problems. Using mixed methods for action
research is advisable, but it is vital to include the data
collection strategies as part of a greater research-design
framework to ensure the results can ultimately be attributed to
the program or treatment of interest. Therefore, when applying
the action research approach it is advisable to follow the steps
of the scientific method and use the sound principles and
application of research designs that are known to produce
results while ensuring adequate levels of internal validity.
Where action research begins to diverge from the traditional
form of experimental research is with the role of the researcher.
The researcher is considered more or less a facilitator or
consultant to the stakeholders who generally drive the research-
question process, although this is clearly not true in all
circumstances. Nonetheless, this, in many ways, is more like the
program evaluation model, only on a smaller scale. This lends
itself to what is known as the participatory action research
(PAR) model, in which the research is based on community-
driven goals, and all those affected participate and take action.
This is often referred to as community-based action research.
The action research approach is an attempt to involve the
interest of those affected and who are concerned about problems
by providing a framework that delivers workable solutions.
We should note that the action research approach is still
evolving, and new ideas and frameworks are often introduced
and refined to suit specific research contexts. For example,
researchers have proposed and demonstrated that the application
of collaborative and analytic autoethnography can be combined
with the action research approach (Acosta, Goltz, & Goodson,
2015). PAR models have also been combined with the Delphi
technique as a means to address specific research objectives
(see Fletcher & Marchildon, 2014). Helmer (1967) originally

developed the Delphi technique as a systematic approach to
garner relevant and appropriate data from those who are
considered experts in a respective field in the absence of a
standard theoretical framework. This is a complementary
approach for the PAR model and should be used more often in
relevant contexts. We refer the reader to learn more about the
application of the Delphi technique in the health sciences
(Keeney, McKenna, & Hasson, 2011) and in education (Manley
& Zinser, 2012).
The action research approach is iterative and cyclical and can
be represented as the following characteristic cycle:
· Explore
· Deliver the intervention
· Observe
· Reflect and revise
Figure 20.1 The Cyclical Action Research Approach
We refer the reader to the following books to learn more about
the action research approach:
· Chevalier, J. M., & Buckles, D. J. (2013). Participatory action
research: Theory and methods for engaged inquiry. London,
England: Routledge.
· Stringer, E. T. (2013). Action research (4th ed.). Thousand
Oaks, CA: Sage.
Embedding Research Designs Within the Action Research
Approach
We recommend four basic research designs that can be
embedded within the action research approach. Because this
approach is indeed cyclical and participatory in nature, it does
not preclude it from including relevant aspects of the research
design framework to secure the internal validity of the findings.
That is, the researcher can confidently attribute the findings to
the program or treatment under examination and reduce the
probability of reporting spurious results. Keep in mind that the
findings are intended to feed back into the environment from
which the research takes place, and they are not intended to

generalize to the greater population of interest.
We detail the components of a design used within the action
research approach in Table 20.1. Dependent variables (O1)
should be indicated after Chapter 21 ConclusionPhilosophical
Tenets
The goal of this guide is to provide practical applications and
visual representations of the most common research designs in
the fields of education, health and the social and behavioral
sciences. We hope that the presentation of each design and the
relevant applied examples will encourage researchers to apply
many of these theoretically sound designs, which, in our
opinion, are underused (particularly mixed methods). This is an
applied text, focused on presenting visual aids and real-world
examples, to illustrate the key points rather than covering
foundational and theoretical issues. However, the importance
and relevance of the theory and philosophy related to the
various research methods should be noted. That is, there are
many theoretical tenets and philosophical principles
undergirding the use of a particular method and associated
design. More specifically, quantitative researchers focus on
testing an a priori theory with an emphasis on deductive
reasoning, and they are more in line with postpositivism.
Alternatively, qualitatively oriented researchers often use
inductive reasoning (or abductive), which is reflective of
constructivism. Mixed methods can be viewed more as
pragmatic in that this form most efficiently combines both the
philosophical approaches of inductive and deductive reasoning.
Some researchers would argue that all research should include
mixed methods in that the form addresses the complexity of
current research problems and counteracts the limitations
inherent in using only one type of method. The reader is
referred to Creswell (2012) for an in-depth overview of
philosophical approaches to quantitative, qualitative, and mixed
methods.Evaluation Approaches
Within this book, we cover some of the most common research
designs in quantitative, qualitative, and mixed methods. We

have not included evaluation approaches or program evaluation
models within the book. Evaluation approaches are primarily
used to judge (or evaluate) the merit or worth of an entire
program or the product or processes of a program. Although
many evaluation approaches have emerged from the traditional
framework of social science research, there is a point when
evaluation and research diverge in several key areas. More
specifically, the primary goal of research (quasi-experimental or
experimental and nonexperimental) is to (a) expand, confirm, or
develop theories; (b) seek outcomes; (c) generalize the findings
(to the subject or population of interest in quantitative
methods); and (d) disseminate the results. Alternatively, the
primary goal of an evaluation is to draw judgments based on the
findings; however, instead of disseminating the findings, the
results are fed back to the stakeholders and ultimately
integrated into the program of interest. Another key distinction
between research and evaluation is that a researcher develops
the research objectives or questions, whereas the stakeholders
typically develop the aims or objectives for the evaluator to
pursue.
Despite these differences, there are many instances where
research and evaluation do overlap (i.e., converge). Based on
the objectives set forth by the stakeholders and considering the
type of program evaluation model to be employed, the
appropriate research design should be embedded within the
evaluation approach. Specifically, the process of selecting a
research design within a program evaluation can take place once
the research questions or objectives have been determined by
the stakeholder. The most appropriate research design is then
incorporated to answer the stated questions. Logistically
speaking, it is usually not feasible or relevant to use
experimental research within a program evaluation; however,
observational, survey, time-series approaches, or regression
point-displacement designs (RPD; see Linden, Trochim, &
Adams, 2006; Trochim & Campbell, 1996) can serve as strong
design alternatives. Most leaders in the field of evaluation agree

that mixed methods is the best method to be used by evaluators.
Creswell and Plano Clark’s (2011) mixed method multiphase
design is an ideal variant to be combined with program
evaluation models. The reader is referred to Stufflebeam and
Coryn (2014) for an in-depth review of evaluation models and
applications. To see an exhaustive list of checklists related to
evaluation, including the CIPP (context, input, process, product)
model, the reader is referred to D. Stufflebeam’s Evaluation
Checklist at http://www.wmich.edu/evaluation/checklists.Data
Analytics
We want to emphasize again that referring to the research
designs presented in this reference guide as “common” can be
misleading and does not mean that the designs are less powerful
or that the results yielded will have less meaning. Practical and
statistical significance can be ensured as long as validity is
secured throughout the process (i.e., instrumentation, data
collection, analysis, and reporting) and an adequate number of
data points and participants are included (i.e., statistical power).
Issues related to statistical power and determining the number
of participants to include in any given study can be reviewed in
Kraemer and Blasey (2015) and a freeware program called
G*Power (Faul, Erdfelder, Lang, & Buchner, 2007). The
statistical or data-analytic techniques are driven by (a) the
research questions or hypotheses and (b) the research design of
choice. After the presentation of each design, we recommend
the most appropriate statistical procedure (parametric) be used,
and we offer recommendations of data-analytic software for
qualitative methods. Statistical procedures will vary with the
application of each design, and there may be instances when
nonparametric procedures should be applied. We refer the
reader to Green and Salkind (2013) and Leech, Barrett, and
Morgan (2014) for sound texts that detail statistical procedures
and techniques using statistical software packages (SPSS), as
well as statistical applications using Microsoft Excel 07–13
(e.g., Pace, 2011). We also refer the reader to Bazeley and
Jackson (2013) for techniques related to qualitative data

analyses.Final Remarks
There are many different types of approaches to research (some
considered to be more obscure) that are not research or method
specific, and they are
HEALTH BEHAVIOR CHANGE CONTRACT- FINAL
REPORT
Purpose: To use information, theories, and resources from class
to attempt to change one health behavior
Instructions:
Directions
Please answer the questions provided for you below.
Summarize the progress you have made to date plus your plan
for the future. When restating your goal, make sure it is a
complete set up statement that has your target behavior AND
goal listed. Do not write a vague goal, it should be specific.
For example, if your goal was to exercise 3-4 days a week for a
min of 30 min in order to lose 5 lbs., make sure you answer
ALL components.
Goal: Re-state the SMART goal from your Health Behavior
Change contract ( if it was not correct or specific in your week
1 assignment, correct it here in this assignment.).

Accomplishment: Describe briefly the progress you made
towards your goal. Be specific. For example, if your goal had
to do with weight loss, don’t just indicate that you lost weight;
include how much weight you lost. If you did not make any
progress, state that.
Successful Strategies: List at least 3 strategies that you have
found useful to you as you worked towards your goal.
Obstacles: List either of the following:
at least 2 obstacles that you successfully overcame as you
worked towards achieving your goal and how you overcome
them; OR
at least 2 obstacles you encountered, but were not able to
overcome and how you could overcome them in the future
Maintenance: Describe briefly what you plan to do from now
on to either achieve your goal, or maintain your successful
attainment of the goal.
Health Behavior Change Contract
My goal was:

2. Accomplishment and Progress with my goal:
3. What were 3 successful strategies that helped you ?
1.
2.
3.
4. List 2 Obstacles you overcame and how you overcame them
OR list 2 obstacles that you encountered that you did not
overcome and what you can do differently in the future to
overcome them
Obstacle 1:
Obstacle 2:
5. Maintenance:

HEALTH BEHAVIOR CHANGE CONTRACT
Purpose: To use information, theories, and resources from class
to attempt to change one health behavior
Points: 100
Instructions:
Prior to beginning this assignment:
• Read Ch. 1 of your text (do not follow the example in
the book use this template)
• View the PowerPoint slides for Chapter 1, & the
Supplemental articles listed in the course resources section on
SMART goals for further clarification.
• Complete the self-assessment: How Healthy Are You?
On pages 20-22 of your text.
Use this template provided to create your contract. Below are
the specific directions for each section of the contract:
Insert your name and your set up statement which includes your
ONE specific behavior and goal in one statement. The target
behavior (example- exercise 30 min 3 days per week – This is
the “WHAT” of your goal, what you will be doing) & the goal
(example- In order to lose 5 lbs.- This is the “WHY” of your
goal. What is the reason/motivation you are doing this
behavior?
Insert the date you plan to begin your goal, followed by the date
you plan to accomplish it.
Create at least three relevant short-term goals that are mini
goals set to help you reach your final goal. For each short-term
goal, indicate the date that you will accomplish it. Add
additional rows as needed. Delete any rows not used. Optional:
For each short-term goal, identify a reward that you will earn

for accomplishing the short-term goal. Select rewards that are
not self-sabotaging your goal. (for example, if you are trying to
lose weight don’t reward yourself with unhealthy foods that
don’t support the goal.) If none, put “none” in the box.
Enter what your long-term goal is over the next 6-12 months.
Describe clearly and specifically at least one tool you will use
to monitor your progress and how you will use it.
Describe clearly and specifically at least three challenges or
obstacles you anticipate encountering as you work towards your
goal. For each challenge, identify at least one solid strategy
you plan to use to help address or minimize each challenge.
Add additional rows as needed.
List resources that will aid you to accomplishing your target
behavior change and goal.
Sign and date your contract. If you do not have an electronic
signature, you may simply type your name in the space for your
signature.
Review and edit your contract making sure there are no spelling
or grammatical errors, and that it looks professional.
Any part of this contract left blank or not answered will be
penalized.
Health Behavior Change Contract
I, ______Alp__Erenel_________ agree to run minimum of 40
minutes and do yoga minimum of 20 min 7 days per week in
order to improve body and spiritual health.
2. I will begin on _3/8/2020___ and plan to reach my goal by
3/29/2020.

3. To reach my final goal, I have devised the following schedule
of relevant short-term goals. For each step in my program I will
give myself the reward listed. (list a minimum of 3 short term
goals)
Short-Term Goal
Due Date
Reward
Run until reach the 5-mile range in 40 min
3/15/2020
None
Run until reach the 7-mile range in 40 min and do meditation
before yoga class
3/22/2020
60 min Swedish massage
Run until reach 10-mile range in 40 min and complete 21-day
Yoga class of Adriene
3/29/2020
Go to vacation for 2 days
Long Term Goal (6-12 months)
Maintain run workout of minimum of 30 minutes and complete
yoga with Adriene 5 different programs minimum of 20 minutes
7days per week in order to reduce stress & improve body health.
4. I will use an app called “Apple activity and Nike run club”
which will track my running and yoga days and duration by
apple watch, or I can track my number of days and minutes of
run and yoga on my calendar on my phone.

5. I anticipate the following challenges as I work towards my
goal and have identified effective strategies for minimizing
those challenges.
Obstacle or Challenge
Strategy
Feeling tired and finding excuse
I will motivate myself by looking my activity app and will
pursue myself not to take any day off while completing my
challenge
If my phone rings, will get distracted by notifications and want
to check them
I will put my phone away while completing my run and yoga,
will motivate myself not to get distracted by apple watch
Willing to eat unhealthy with my high intense running schedule
I will teach myself not to do anything I will regret.
6. Resources: I will use to help me change this behavior
include:
(For example, what can you research to help you with any part
of your goal? What app can help you? What person can be a
support during this contract and accomplishing this goal?)
Name a specific friend/partner/relative: Fiancé
A book, or an app: Apple activity, Nike run club
A reputable website:
https://www.youtube.com/user/yogawithadriene

7. I sign this contract as an indication of my personal
commitment to reach my goal.
Signature Date 3/7/2020
Assignment 3 – Mixed Methods
In this assignment, the student will develop appropriate
quantitative and qualitative research questions toward the
development of a mixed method design. Next, the student will
include the quantitative research design noted from either
assignment 2 and include a qualitative component designed to
address the qualitative research question. The student will
provide a visual diagram of the mixed method design and
include the appropriate design notations. A discussion of the
strengths and limitations of this approach will be offered at the
end of this assignment.
Assignment 2: Research Design
The proposed research study will be based on a survey, cross-
sectional and correlation research designs. It will also employ
both qualitative and quantitative research approaches. The
research study will take a quantitative approach since it consists
of variables that will be measured with numbers and analyzed
using various statistical techniques to find out the levels of
stress among parents before and after their children have been
diagnosed with autism. The research study will also take a
qualitative approach. This particular approach will give clear,
precise and testable expression to qualitative ideas.
The study is cross-sectional because it will be carried out across
various participants over a short period. It will not be necessary

for the researcher to make a follow up of the respondents. The
survey is preferred because it will allow the researcher to obtain
data from a large number of respondents. The sample that will
be used will, therefore, be convenient. The selected research
design is likely to serve well in all aspects of the study. One of
the advantages of the selected research design is that it enables
the researcher to get data from many respondents hence able to
obtain generalizable findings.
However, there are a few limitations of the survey and cross-
sectional design. First, the researcher may get very tired after
collecting data from many respondents. This is likely to result
in fatigue. Fatigue might impact negatively on the findings of
the study. It reduces the likelihood of obtaining accurate
measures. Secondly, it is time-consuming. Carrying out a survey
consumes a lot of time. When a lot of time is consumed, time is
wasted. Time wastage is likely to eat up the time that the
researcher has to execute other duties like data analysis and
presentation of findings.
Developing a research scenario
The research scenario is developed based on survey design.
Some of the people living in a certain geographical area have
children who have been diagnosed with autism. A researcher,
therefore, comes up with an idea to investigate to determine the
stress levels of parents who have children diagnosed with
autism. A researcher is, therefore, investigating a group of
people to find out their stress levels before and after their
children are diagnosed with autism. The findings of this
particular investigation are likely to show that many parents
become more stressed when their children have been diagnosed
with autism. It is, however, good to note that this high level of
stress eventually begins to drop when parents of autistic
children accept the predicament that has to befall their children.
The independent variable is the find out their stress levels
among parents. The dependent variable is autism among
children. The following is the research question: what is the
level of stress among parents before and after their children

have been diagnosed with autism?
Sampling technique and procedure
The researcher might not be able to collect data from all the
parents whose children have been diagnosed with autism. In an
attempt to correctly answer the research questions, there is a
need for a researcher to select a convenient sample. The
researcher might not have enough time and resources to collect
the entire population consisting of parents whose children have
been diagnosed with autism. The researcher will, therefore, be
required to choose a convenient method of sampling to reduce
the number of cases.
The sampling method that is appropriate for the study is
probability sampling. A stratified sampling technique is one of
the techniques that are categorized under probability sampling.
It is often used where there is a great deal of variation within a
population. Stratified sampling is adopted to classify parents
who have children with autism according to their occupations.
In stratified sampling, the population is divided into strata (or
subgroups) and a random sample is taken from each subgroup.
A subgroup is a natural set of items. The sub-groups will be
based on the occupation of parents who have children with
autism. The purpose of this particular sampling technique is to
ensure that every stratum is adequately represented. One
advantage of this particular sampling technique is that it will
enable the researcher to obtain a convenient sample size that is
representative of the population.
Threats of the external, construct, and statistical conclusions
validity
There is various threats of the external, construct, and statistical
conclusions validity. The first threat is the use of multiple data
collection instruments. When conducting a survey, a researcher
has to collect data from respondents by using instruments such
as questionnaires or interviews. Using multiple data collection
instruments increases the probability of using instruments that
are not reliable. This is likely to result in inaccurate findings.
This threat will be addressed by using one reliable data

collection instrument.
The second threat of external, construct, and statistical
conclusions validity is repeated tests. A researcher is supposed
to carry out tests when analyzing the collected data. Many
repeated tests increase the chances of obtaining different
findings. This increases the doubt on the real statistical results.
The researcher will address this particular threat by minimizing
the number of tests to be done.
Sample selection bias is another threat to external, construct,
and statistical conclusions validity. Unfairness in selecting
samples that represent the population can lead to poor findings.
This threat will be addressed by using the selected sampling
technique (stratified sampling). This particular sampling
technique minimizes bias when selecting the sample.
References
Etikan, I., & Bala, K. (2017). Sampling and sampling
methods. Biometrics & Biostatistics International Journal, 5(6),
00149.
Owens, L. K. (2002). Introduction to survey research design.
In SRL fall 2002 seminar series (pp. 78-105).
Yu, C. H., & Ohlund, B. (2010). Threats to validity of research
design. Retrieved January, 12, 2012.

The Case StudyMany disciplines use various forms of the ca.docx

Recommended

More Related Content

Similar to The Case StudyMany disciplines use various forms of the ca.docx (20)

More from arnoldmeredith47041 (20)

Recently uploaded (20)

The Case StudyMany disciplines use various forms of the ca.docx