Thread (Operating System)

Jul 14, 2018Download as PPTX, PDF0 likes395 views

A thread is a portion of code that may be executed independently of the main program. For example, a program may have an open thread waiting for a specific event to occur or running a separate job, allowing the main program to perform other tasks. A program is capable of having multiple threads open at once and will either terminate or suspend them after a task is completed, or the program is closed.

What is Thread
A thread is a portion of code that may be executed
independently of the main program.
For example, a program may have an open thread waiting
for a specific event to occur or running a separate job,
allowing the main program to perform other tasks.
A program is capable of having multiple threads open at
once and will either terminate or suspend them after a task
is completed, or the program is closed.

Type of Thread
There are two type of thread:-
Single Thread
Multiple thread

Single Thread:-
A single-thread, only one task can be done at a time and the program
waits until a task is finished before starting another one.

Multiple thread:-
A process with two threads of execution, running on a single
processor

Benefits
Responsiveness
Resource Sharing
Economy
Scalability

Responsiveness:-
Multithreading an interactive application may allow a program to
continue running even if it is blocked or is performing a lengthy
operating, increasing responsiveness to the user.
Resource Sharing-
Thread share resource of process, easier than shared memory or
message passing.

Economy:- cheaper than process creation, thread switching lower
overhead than context switching.
Scalability:- process can take advantage of multiprocessor. The
multithreading can be greatly increased in a multiprocessor
architecture.

User Threads and kernel thread
User Level Threads -- User managed threads
Kernel Level Threads -- Operating System managed threads acting on
kernel, an operating system core.

User Level Threads:-
In this case, application manages thread management kernel is not
aware of the existence of threads.
The thread library contains code for creating and destroying threads, for
passing message and data between threads, for scheduling thread
execution

Kernel Level Threads:-
Thread management done by the Kernel.
There is no thread management code in the application area.
 Kernel threads are supported directly by the operating system.
Any application can be programmed to be multithreaded.

Multithreading Models
Some operating system provide a combined user level
thread and Kernel level thread facility. Solaris is a good
example of this combined approach.

Multithreading models are three types
Many to many relationship.
Many to one relationship.
One to one relationship.

Difference between User Level &
Kernel Level Thread
• User Level Threads
• User level threads are
faster to create and
manage.
• Implementation is by
a thread library at the
user level.
• Kernel Level Thread
• Kernel level threads
are slower to create
and manage.
• Operating system
supports creation of
Kernel threads.

• User level thread is
generic and can run
on any operating
system.
• Multi-threaded
application cannot
take advantage of
multiprocessing.
• Kernel level thread is
specific to the
operating system.
• Kernel routines
themselves can be
multithreaded.

The document discusses kernels and their responsibilities. Kernels are the core component of an operating system that controls processes, memory management, I/O devices, and acts as an interface between hardware and applications. Kernels can take different forms such as monolithic kernels that run all services in the kernel space or micro kernels that separate services into user-space servers that communicate via messages. Hybrid kernels combine aspects of monolithic and micro kernels.

Linux InterruptsKernel TLV

In this talk Liran will discuss interrupt management in Linux, effective handling, how to defer work using tasklets, workqueues and timers. We'll learn how to handle interrupts in userspace and talk about the performance and latency aspects of each method as well as look at some examples from the kernel source. Liran is the CTO at Mabel technology and co-founder of DiscoverSDK - Software Libraries directory and DiscoverCloud - Business Apps directory. More than 20 years of training experience including courses in: Linux, Android, Real-time and Embedded systems, and many more.

Basic Linux Internalsmukul bhardwaj

Part 02 Linux Kernel Module ProgrammingTushar B Kute

Embedded Linux Kernel - Build your custom kernelEmertxe Information Technologies Pvt Ltd

Linux Memory ManagementSuvendu Kumar Dash

Linux Internals - Part IEmertxe Information Technologies Pvt Ltd

Linux Kernel ProgrammingNalin Sharma

This document discusses kernel modules in Linux. It begins by defining the kernel as the central part of the operating system that manages processes, memory, devices, and storage. Kernel modules allow new functionality to be added to the kernel at runtime without rebooting. Common module commands like insmod, lsmod and rmmod are described. The document outlines how modules are loaded and unloaded by the kernel and provides a simple "hello world" example of a kernel module.

Operating system: threads(mulithreading,benefits of threads, types of thread)sonuu__

Android for Embedded Linux DevelopersOpersys inc.

Accessing Hardware on AndroidGary Bisson

This document discusses various ways to access hardware on Android systems. It begins with an introduction to accessing hardware differently on Android compared to GNU/Linux systems. It then covers direct access from applications, using the Android Hardware Abstraction Layer (HAL), adding a custom system service, and building native applications that can directly access hardware. The document provides code examples for each method.

U boot porting guide for SoCMacpaul Lin

This document provides an overview of the steps to port the U-boot bootloader to a new SoC using the NDS32 architecture as an example. It describes the directory structure of U-boot and key files related to the architecture, board, configuration, and device drivers. The document outlines where to define SoC hardware addresses, initialize board-specific peripherals, configure options, and implement device drivers to support the new SoC and board.

Embedded Android : System Development - Part IV (Android System Services)Emertxe Information Technologies Pvt Ltd

OS Process and Thread Conceptssgpraju

This lecture covers process and thread concepts in operating systems including scheduling criteria and algorithms. It discusses key process concepts like process state, process control block and CPU scheduling. Common scheduling algorithms like FCFS, SJF, priority and round robin are explained. Process scheduling queues and the producer-consumer problem are also summarized. Evaluation methods for scheduling algorithms like deterministic modeling, queueing models and simulation are briefly covered.

Process management in osSumant Diwakar

Monolithic kernelARAVIND18MCS1004

This document discusses monolithic kernels. It defines a kernel as the core component of an operating system that controls processes, memory management, I/O devices, and acts as an interface between hardware and applications. A monolithic kernel runs all basic system services like process management and I/O communication within the kernel space. While monolithic kernels provide rich hardware access and fast execution, they are difficult to maintain and debug due to their large size and lack of modularity.

Linux basicsSantosh Khadsare

The document discusses the history and advantages of Linux compared to other operating systems like Windows, DOS and UNIX. It explains how the GNU project was started to develop a free and open source UNIX-like operating system. It then describes how Linus Torvalds developed the initial Linux kernel in 1991 building on the work of the GNU project. It highlights some key advantages of Linux like high security, many available tools and the flexibility of the environment. It also provides a brief overview of some common Linux components like the kernel, shells, KDE/GNOME desktop environments and the directory structure.

ParallelismMd Raseduzzaman

This document discusses parallelism and its goals of increasing computational speed and throughput. It describes two types of parallelism: instruction level parallelism and processor level parallelism. Instruction level parallelism techniques include pipelining and superscalar processing to allow multiple instructions to execute simultaneously. Processor level parallelism involves multiple independent processors working concurrently through approaches like array computers and multi-processors.

Rt linux-lab1JOLLUSUDARSHANREDDY

Linux kernel Architecture and PropertiesSaadi Rahman

This document discusses the key components and architecture of the Linux kernel. It begins by defining the kernel as the central module of an operating system that loads first and remains in memory, providing essential services. It then describes the major subsystems of Linux, including process management, memory management, virtual file systems, network stacks, and device drivers. It concludes that the modular design of the Linux kernel has supported its growth and success through independent and extensible development of these subsystems.

Hubungan hardware dengan kernel, shell, userRyandika Alfarishi

U-Boot Porting on New HardwareRuggedBoardGroup

Embedded Linux on ARMEmertxe Information Technologies Pvt Ltd

Why do People Prefer Using Open Source Software?david rom

Embedded Android : System Development - Part IEmertxe Information Technologies Pvt Ltd

Android device driver structure introductionWilliam Liang

BusyBox for Embedded LinuxEmertxe Information Technologies Pvt Ltd

Ndu06 typesof languagenicky_walters

This document discusses different types of programming languages: 1) Procedural languages like C and Pascal use explicit commands to control program flow. Tasks are broken into procedures. 2) Object-oriented languages like Java break programs into interacting objects rather than instruction lists. Objects encapsulate data and methods. 3) Event-driven languages like VB.NET are used for graphical user interfaces. They have procedural and object features and respond to user events. 4) Markup languages like HTML and XML use tags to control formatting and structure rather than program flow. They are not true programming languages. 5) Scripting languages like JavaScript add functionality to applications and allow commands to be executed directly from a keyboard. The language

Threaddharini waghela

This document discusses threads and multithreading models in operating systems. It defines threads as flows of execution through a process with their own program counter and stack. The main types of threads are user-level threads managed by a library and kernel-level threads managed by the OS. User-level threads are faster to create but can't leverage multiprocessing, while kernel-level threads allow parallelism but are slower to create. Multithreading models include many-to-many mapping threads to CPUs, many-to-one mapping many user threads to one kernel thread, and one-to-one mapping of each user thread to a kernel thread.

Multi threaded programmingAnyapuPranav

1) A thread is a flow of execution within a process that has its own program counter, registers, and stack. Threads allow for parallelism and improved performance over single-threaded processes. 2) Multithreaded processes allow multiple parts of a program to execute concurrently using multiple threads, whereas single-threaded processes execute instructions in a single sequence. 3) There are two main types of threads: user-level threads managed by a user-space thread library, and kernel-level threads directly supported by the operating system kernel. Kernel threads can take advantage of multiprocessors but have more overhead than user-level threads.

More Related Content

What's hot (20)

Operating system: threads(mulithreading,benefits of threads, types of thread)sonuu__

Android for Embedded Linux DevelopersOpersys inc.

Accessing Hardware on AndroidGary Bisson

U boot porting guide for SoCMacpaul Lin

Embedded Android : System Development - Part IV (Android System Services)Emertxe Information Technologies Pvt Ltd

OS Process and Thread Conceptssgpraju

Process management in osSumant Diwakar

Monolithic kernelARAVIND18MCS1004

Linux basicsSantosh Khadsare

ParallelismMd Raseduzzaman

Rt linux-lab1JOLLUSUDARSHANREDDY

Linux kernel Architecture and PropertiesSaadi Rahman

Hubungan hardware dengan kernel, shell, userRyandika Alfarishi

U-Boot Porting on New HardwareRuggedBoardGroup

Embedded Linux on ARMEmertxe Information Technologies Pvt Ltd

Why do People Prefer Using Open Source Software?david rom

Embedded Android : System Development - Part IEmertxe Information Technologies Pvt Ltd

Android device driver structure introductionWilliam Liang

BusyBox for Embedded LinuxEmertxe Information Technologies Pvt Ltd

Ndu06 typesof languagenicky_walters

Operating system: threads(mulithreading,benefits of threads, types of thread)sonuu__

Android for Embedded Linux DevelopersOpersys inc.

Accessing Hardware on AndroidGary Bisson

U boot porting guide for SoCMacpaul Lin

Embedded Android : System Development - Part IV (Android System Services)Emertxe Information Technologies Pvt Ltd

OS Process and Thread Conceptssgpraju

Process management in osSumant Diwakar

Monolithic kernelARAVIND18MCS1004

Linux basicsSantosh Khadsare

ParallelismMd Raseduzzaman

Rt linux-lab1JOLLUSUDARSHANREDDY

Linux kernel Architecture and PropertiesSaadi Rahman

Hubungan hardware dengan kernel, shell, userRyandika Alfarishi

U-Boot Porting on New HardwareRuggedBoardGroup

Embedded Linux on ARMEmertxe Information Technologies Pvt Ltd

Why do People Prefer Using Open Source Software?david rom

Embedded Android : System Development - Part IEmertxe Information Technologies Pvt Ltd

Android device driver structure introductionWilliam Liang

BusyBox for Embedded LinuxEmertxe Information Technologies Pvt Ltd

Ndu06 typesof languagenicky_walters

Similar to Thread (Operating System) (20)

Threaddharini waghela

Multi threaded programmingAnyapuPranav

Operating System-Thread concept in Operating Systemcscprabh

Threads pptpanchaldev1

Threads provide a way to improve application performance through parallelism. A thread is a flow of execution through a process's code and has its own program counter, registers, and stack. Threads are lighter weight than processes and allow multitasking within a single process. There are two types of threads: user-level threads, which are managed in userspace libraries, and kernel-level threads, which are managed by the operating system kernel. User-level threads are faster but cannot take advantage of multiprocessing, while kernel-level threads can run in parallel on multiprocessors but are slower to create and manage. Threads must be mapped to kernel threads using a many-to-one, one-to-one, or many

ThreadA. S. M. Shafi

A thread is a flow of execution through a process's code that maintains its own program counter, registers, and stack. Threads allow for parallel execution within a process to improve performance. There are two types of threads: user-level threads managed by a thread library and kernel-level threads managed by the operating system kernel. User-level threads are faster to create but cannot take advantage of multiprocessing, while kernel-level threads can utilize multiple processors but are slower to create and manage.

Lecture 3 threadsKumbirai Junior Muzavazi

Threads provide concurrency within a process by allowing parallel execution. A thread is a flow of execution that has its own program counter, registers, and stack. Threads share code and data segments with other threads in the same process. There are two types: user threads managed by a library and kernel threads managed by the operating system kernel. Kernel threads allow true parallelism but have more overhead than user threads. Multithreading models include many-to-one, one-to-one, and many-to-many depending on how user threads map to kernel threads. Threads improve performance over single-threaded processes and allow for scalability across multiple CPUs.

W-9.pptxalianwarr

Threads are lightweight processes that allow for concurrency within a single process. There are three main types of threading models: - Many-to-one maps many user threads to a single kernel thread, allowing for efficient user-level thread management but inability to leverage multiprocessors. - One-to-one maps each user thread to its own kernel thread, enabling better concurrency but with more overhead to create threads. - Many-to-many multiplexes user threads to a smaller number of kernel threads, balancing concurrency and efficiency while allowing threads to run concurrently on multiprocessors.

threads-ppfldkgsh;reghuiregiuhrughet.pptxpiyushlohia1857

This document discusses threads in operating systems. It defines a thread as a flow of execution through a process's code, with its own program counter, registers and stack. Threads provide a way to improve performance through parallelism. Each thread belongs to one process. Threads are lighter weight than processes, requiring fewer resources. There are two types of threads - user level threads managed by libraries and kernel level threads directly supported by the operating system kernel. Different threading models map user threads to kernel threads, including many-to-one, one-to-one, and many-to-many models.

Threads lecture slides for operating systemsamirtarek401

thread os.pptxSANJUSANJEEVTOPPO

This document discusses threads in operating systems. It defines a thread as a flow of execution through a process's code, with its own program counter, registers and stack. Each thread belongs to a single process. The document compares processes and threads, noting that threads are lighter weight than processes and can share resources. It describes user-level threads, which are managed in userspace libraries, and kernel-level threads, which are managed by the operating system kernel. The advantages and disadvantages of each type are provided. Finally, it discusses different multi-threading models including many-to-one, one-to-one, and many-to-many.

Threads (operating System)Prakhar Maurya

Threads .pptmeet darji

This document discusses threads and multithreading in operating systems. A thread is a flow of execution through a process with its own program counter, registers, and stack. Multithreading allows multiple threads within a process to run concurrently on multiple processors. There are three relationship models between user threads and kernel threads: many-to-many, many-to-one, and one-to-one. User threads are managed in userspace while kernel threads are managed by the operating system kernel. Both have advantages and disadvantages related to performance, concurrency, and complexity.

Operating system 20 threadsVaibhav Khanna

J threads-pdfVenketesh Babu

This document provides an introduction to using threads in Java programs. It explains that threads allow multiple activities to run concurrently within a single process by executing independently yet sharing resources like memory. The tutorial covers why threads are useful for improving responsiveness, taking advantage of multiple processors, simplifying programming models, and performing asynchronous tasks. It also discusses basics like creating and controlling threads, ensuring safe sharing of data between threads, and avoiding issues like deadlocks. An example demonstrates calculating prime numbers concurrently using one thread for timing and another for the calculation work.

Epc 3.pptCasmoletJ

An operating system (OS) is software that manages computer hardware resources and provides common services for computer programs. The document discusses the functions, components, types, and concepts of operating systems including process and memory management, I/O device management, user interfaces, single-user vs. multi-user systems, and threading models. It provides details on how operating systems schedule processes, manage files and memory, and utilize threads at both the user and kernel level.

Concept of thread, multi thread, tcbKanza batool

A thread is the smallest unit of processing that can be performed in an OS. A thread is a flow of execution through the process code, with its own program counter that keeps track of which instruction to execute next, system registers which hold its current working variables, and a stack which contains the execution history. Each thread belongs to exactly one process and no thread can exist outside a process. Threads are also known as Lightweight processes. For example, in a browser, many tabs can be viewed as threads. MS Word uses many threads - formatting text from one thread, processing input from another thread, etc.

dos slide share.pptxNagaVarthini

A thread is a flow of execution through a process's code with its own program counter and stack. Threads provide a way to improve performance through parallelism. There are two types of threads: user level threads which are managed by user libraries but cannot take advantage of multiprocessing, and kernel level threads which are supported directly by the operating system and allow a process's threads to run concurrently on multiple processors. Kernel threads can schedule other threads while one is blocked but have higher overhead than user threads.

MulitthreadDeepaR42

The document discusses multithreading in Java. It defines threads as lightweight processes that can run concurrently within a single process using multiple cores. In Java, threads can be created by extending the Thread class or implementing the Runnable interface. While multithreading improves performance, it also introduces complexity because threads access shared memory simultaneously, which can cause errors. Proper use of synchronized blocks, volatile variables, and signaling is needed to coordinate thread access to shared resources.

Java Thread & Multithreadingjehan1987

This document discusses threads and multithreading. It defines a thread as the smallest sequence of instructions that can be managed independently, and notes that multithreading allows a program to manage multiple tasks concurrently. Benefits of multithreading include improved responsiveness, faster execution on multi-core CPUs, lower resource usage, better system utilization, simplified communication between threads, and enabling parallelization. Challenges with multithreading include synchronization between threads accessing shared data and resources, and the risk that a misbehaving thread can crash the entire process. The document provides examples of creating threads in Java using the Runnable interface and by extending the Thread class.

Threadschrisjosewanjira

Threads are lightweight processes that exist within a single process and share resources like memory and files. They allow for parallel execution on multi-core systems through rapid context switching between threads on the CPU. While threads share many properties with processes, they are not fully independent and protection between threads is not guaranteed. User-level threads are managed in libraries rather than by the operating system kernel, while kernel-level threads are known and scheduled by the OS. Threads provide advantages over processes like lower overhead context switching and easier sharing of data, but blocking of one thread can block the entire process.

Threaddharini waghela

Multi threaded programmingAnyapuPranav

Operating System-Thread concept in Operating Systemcscprabh

Threads pptpanchaldev1

ThreadA. S. M. Shafi

Lecture 3 threadsKumbirai Junior Muzavazi

W-9.pptxalianwarr

threads-ppfldkgsh;reghuiregiuhrughet.pptxpiyushlohia1857

Threads lecture slides for operating systemsamirtarek401

thread os.pptxSANJUSANJEEVTOPPO

Threads (operating System)Prakhar Maurya

Threads .pptmeet darji

Operating system 20 threadsVaibhav Khanna

J threads-pdfVenketesh Babu

Epc 3.pptCasmoletJ

Concept of thread, multi thread, tcbKanza batool

dos slide share.pptxNagaVarthini

MulitthreadDeepaR42

Java Thread & Multithreadingjehan1987

Threadschrisjosewanjira

More from kiran Patel (11)

2017 Union budget of India kiran Patel

C++ concept of Polymorphismkiran Patel

Database Management System( Normalization)kiran Patel

The document discusses database normalization and different normal forms including 1NF, 2NF, 3NF, and BCNF. It explains that normalization improves database design by generating relations of higher normal forms. The goal of normalization is to eliminate dependencies on non-key attributes. Higher normal forms like BCNF and 3NF ensure relations are dependent only on candidate keys to reduce data anomalies and redundancies. Examples are provided to illustrate the different normal forms.

B tree (computer Science)kiran Patel

Effort estimation( software Engineering)kiran Patel

Library management (use case diagram Software engineering)kiran Patel

A use case diagram depicts interactions between elements of a system and can be used to model a library management system. A class diagram illustrates relationships between classes and their dependencies using UML. It defines methods and variables in objects. A data flow diagram is a graphical model of how data moves through an information system, showing processes and used as a preliminary overview of a system.

Brain Computer Interfacekiran Patel

Artificial Inteligencekiran Patel

This document provides an overview of the history, applications, technologies, advantages, and future of artificial intelligence. It discusses early AI programs from the 1940s-1950s, the rise of machine learning in the 1980s, and recent advances like self-driving cars and question answering robots. The technologies covered include expert systems, natural language processing, computer vision, robotics, fuzzy logic, and neural networks. Some advantages of AI are improving lives through automation and solving health problems, while limitations include slow response times and inability to handle emergencies. The conclusion recognizes AI's increased understanding of intelligence but also the ongoing challenges of fully modeling human reasoning.

Smart buckets pptkiran Patel

Linked list using Dynamic Memory Allocationkiran Patel

A linked list is a linear data structure where each node contains a link to the next node. There are several types of linked lists including singly-linked, doubly-linked, circular, and circular doubly-linked lists. Linked lists allow for efficient insertion and removal of nodes and can grow and shrink dynamically. Common operations on linked lists include creation, insertion, deletion, traversal, searching, and concatenation.

Dynamic memory Allocation in c languagekiran Patel

Computer memory can store information temporarily or permanently. There are two types of memory allocation: static allocation at compile time and dynamic allocation at runtime. Dynamic allocation uses functions like malloc(), calloc(), realloc(), and free() to allocate and free memory as needed during program execution. Malloc allocates a single block, calloc allocates multiple blocks and initializes to zero, realloc changes the size of an existing block, and free releases a block back to the system.

2017 Union budget of India kiran Patel

C++ concept of Polymorphismkiran Patel

Database Management System( Normalization)kiran Patel

B tree (computer Science)kiran Patel

Effort estimation( software Engineering)kiran Patel

Library management (use case diagram Software engineering)kiran Patel

Brain Computer Interfacekiran Patel

Artificial Inteligencekiran Patel

Smart buckets pptkiran Patel

Linked list using Dynamic Memory Allocationkiran Patel

Dynamic memory Allocation in c languagekiran Patel

Recently uploaded (20)

Level 1-Safety.pptx Presentation of Electrical SafetyJoseAlbertoCariasDel

Data Structures_Searching and Sorting.pptxRushaliDeshmukh2

Mathematical foundation machine learning.pdfTalhaShahid49

ELectronics Boards & Product Testing_Shiju.pdfShiju Jacob

Data Structures_Introduction to algorithms.pptxRushaliDeshmukh2

Concept of Problem Solving, Introduction to Algorithms, Characteristics of Algorithms, Introduction to Data Structure, Data Structure Classification (Linear and Non-linear, Static and Dynamic, Persistent and Ephemeral data structures), Time complexity and Space complexity, Asymptotic Notation - The Big-O, Omega and Theta notation, Algorithmic upper bounds, lower bounds, Best, Worst and Average case analysis of an Algorithm, Abstract Data Types (ADT)

Smart_Storage_Systems_Production_Engineering.pptxrushikeshnavghare94

π0.5: a Vision-Language-Action Model with Open-World GeneralizationNABLAS株式会社

今回の資料「Transfusion / π0 / π0.5」は、画像・言語・アクションを統合するロボット基盤モデルについて紹介しています。拡散×自己回帰を融合したTransformerをベースに、π0.5ではオープンワールドでの推論・計画も可能に。 This presentation introduces robot foundation models that integrate vision, language, and action. Built on a Transformer combining diffusion and autoregression, π0.5 enables reasoning and planning in open-world settings.

fluke dealers in bangalore..............Haresh Vaswani

The Fluke 925 is a vane anemometer, a handheld device designed to measure wind speed, air flow (volume), and temperature. It features a separate sensor and display unit, allowing greater flexibility and ease of use in tight or hard-to-reach spaces. The Fluke 925 is particularly suitable for HVAC (heating, ventilation, and air conditioning) maintenance in both residential and commercial buildings, offering a durable and cost-effective solution for routine airflow diagnostics.

Smart Storage Solutions.pptx for production engineeringrushikeshnavghare94

"Boiler Feed Pump (BFP): Working, Applications, Advantages, and Limitations E...Infopitaara

A Boiler Feed Pump (BFP) is a critical component in thermal power plants. It supplies high-pressure water (feedwater) to the boiler, ensuring continuous steam generation. ⚙️ How a Boiler Feed Pump Works Water Collection: Feedwater is collected from the deaerator or feedwater tank. Pressurization: The pump increases water pressure using multiple impellers/stages in centrifugal types. Discharge to Boiler: Pressurized water is then supplied to the boiler drum or economizer section, depending on design. 🌀 Types of Boiler Feed Pumps Centrifugal Pumps (most common): Multistage for higher pressure. Used in large thermal power stations. Positive Displacement Pumps (less common): For smaller or specific applications. Precise flow control but less efficient for large volumes. 🛠️ Key Operations and Controls Recirculation Line: Protects the pump from overheating at low flow. Throttle Valve: Regulates flow based on boiler demand. Control System: Often automated via DCS/PLC for variable load conditions. Sealing & Cooling Systems: Prevent leakage and maintain pump health. ⚠️ Common BFP Issues Cavitation due to low NPSH (Net Positive Suction Head). Seal or bearing failure. Overheating from improper flow or recirculation.

The Gaussian Process Modeling Module in UQLabJournal of Soft Computing in Civil Engineering

We introduce the Gaussian process (GP) modeling module developed within the UQLab software framework. The novel design of the GP-module aims at providing seamless integration of GP modeling into any uncertainty quantification workflow, as well as a standalone surrogate modeling tool. We first briefly present the key mathematical tools on the basis of GP modeling (a.k.a. Kriging), as well as the associated theoretical and computational framework. We then provide an extensive overview of the available features of the software and demonstrate its flexibility and user-friendliness. Finally, we showcase the usage and the performance of the software on several applications borrowed from different fields of engineering. These include a basic surrogate of a well-known analytical benchmark function; a hierarchical Kriging example applied to wind turbine aero-servo-elastic simulations and a more complex geotechnical example that requires a non-stationary, user-defined correlation function. The GP-module, like the rest of the scientific code that is shipped with UQLab, is open source (BSD license).

Process Parameter Optimization for Minimizing Springback in Cold Drawing Proc...Journal of Soft Computing in Civil Engineering

In tube drawing process, a tube is pulled out through a die and a plug to reduce its diameter and thickness as per the requirement. Dimensional accuracy of cold drawn tubes plays a vital role in the further quality of end products and controlling rejection in manufacturing processes of these end products. Springback phenomenon is the elastic strain recovery after removal of forming loads, causes geometrical inaccuracies in drawn tubes. Further, this leads to difficulty in achieving close dimensional tolerances. In the present work springback of EN 8 D tube material is studied for various cold drawing parameters. The process parameters in this work include die semi-angle, land width and drawing speed. The experimentation is done using Taguchi’s L36 orthogonal array, and then optimization is done in data analysis software Minitab 17. The results of ANOVA shows that 15 degrees die semi-angle,5 mm land width and 6 m/min drawing speed yields least springback. Furthermore, optimization algorithms named Particle Swarm Optimization (PSO), Simulated Annealing (SA) and Genetic Algorithm (GA) are applied which shows that 15 degrees die semi-angle, 10 mm land width and 8 m/min drawing speed results in minimal springback with almost 10.5 % improvement. Finally, the results of experimentation are validated with Finite Element Analysis technique using ANSYS.

RICS Membership-(The Royal Institution of Chartered Surveyors).pdfMohamedAbdelkader115

Degree_of_Automation.pdf for Instrumentation and industrial specialistshreyabhosale19

DSP and MV the Color image processing.pptHafizAhamed8

Introduction to Zoomlion Earthmoving.pptxAS1920

Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different ...Journal of Soft Computing in Civil Engineering

Passenger car unit (PCU) of a vehicle type depends on vehicular characteristics, stream characteristics, roadway characteristics, environmental factors, climate conditions and control conditions. Keeping in view various factors affecting PCU, a model was developed taking a volume to capacity ratio and percentage share of particular vehicle type as independent parameters. A microscopic traffic simulation model VISSIM has been used in present study for generating traffic flow data which some time very difficult to obtain from field survey. A comparison study was carried out with the purpose of verifying when the adaptive neuro-fuzzy inference system (ANFIS), artificial neural network (ANN) and multiple linear regression (MLR) models are appropriate for prediction of PCUs of different vehicle types. From the results observed that ANFIS model estimates were closer to the corresponding simulated PCU values compared to MLR and ANN models. It is concluded that the ANFIS model showed greater potential in predicting PCUs from v/c ratio and proportional share for all type of vehicles whereas MLR and ANN models did not perform well.

DATA-DRIVEN SHOULDER INVERSE KINEMATICS YoungBeom Kim1 , Byung-Ha Park1 , Kwa...charlesdick1345

Metal alkyne complexes.pptx in chemistrymee23nu

theory-slides-for react for beginners.pptxsanchezvanessa7896

Level 1-Safety.pptx Presentation of Electrical SafetyJoseAlbertoCariasDel

Data Structures_Searching and Sorting.pptxRushaliDeshmukh2

Mathematical foundation machine learning.pdfTalhaShahid49

ELectronics Boards & Product Testing_Shiju.pdfShiju Jacob

Data Structures_Introduction to algorithms.pptxRushaliDeshmukh2

Smart_Storage_Systems_Production_Engineering.pptxrushikeshnavghare94

π0.5: a Vision-Language-Action Model with Open-World GeneralizationNABLAS株式会社

fluke dealers in bangalore..............Haresh Vaswani

Smart Storage Solutions.pptx for production engineeringrushikeshnavghare94

"Boiler Feed Pump (BFP): Working, Applications, Advantages, and Limitations E...Infopitaara

The Gaussian Process Modeling Module in UQLabJournal of Soft Computing in Civil Engineering

Process Parameter Optimization for Minimizing Springback in Cold Drawing Proc...Journal of Soft Computing in Civil Engineering

RICS Membership-(The Royal Institution of Chartered Surveyors).pdfMohamedAbdelkader115

Degree_of_Automation.pdf for Instrumentation and industrial specialistshreyabhosale19

DSP and MV the Color image processing.pptHafizAhamed8

Introduction to Zoomlion Earthmoving.pptxAS1920

Development of MLR, ANN and ANFIS Models for Estimation of PCUs at Different ...Journal of Soft Computing in Civil Engineering

DATA-DRIVEN SHOULDER INVERSE KINEMATICS YoungBeom Kim1 , Byung-Ha Park1 , Kwa...charlesdick1345

Metal alkyne complexes.pptx in chemistrymee23nu

theory-slides-for react for beginners.pptxsanchezvanessa7896

Thread (Operating System)

1. Submitted by Kiran Patel

2. What is Thread A thread is a portion of code that may be executed independently of the main program. For example, a program may have an open thread waiting for a specific event to occur or running a separate job, allowing the main program to perform other tasks. A program is capable of having multiple threads open at once and will either terminate or suspend them after a task is completed, or the program is closed.

3. Type of Thread There are two type of thread:- Single Thread Multiple thread

4. Single Thread:- A single-thread, only one task can be done at a time and the program waits until a task is finished before starting another one.

5. Multiple thread:- A process with two threads of execution, running on a single processor

6. Benefits Responsiveness Resource Sharing Economy Scalability

7. Responsiveness:- Multithreading an interactive application may allow a program to continue running even if it is blocked or is performing a lengthy operating, increasing responsiveness to the user. Resource Sharing- Thread share resource of process, easier than shared memory or message passing.

8. Economy:- cheaper than process creation, thread switching lower overhead than context switching. Scalability:- process can take advantage of multiprocessor. The multithreading can be greatly increased in a multiprocessor architecture.

9. User Threads and kernel thread User Level Threads -- User managed threads Kernel Level Threads -- Operating System managed threads acting on kernel, an operating system core.

10. User Level Threads:- In this case, application manages thread management kernel is not aware of the existence of threads. The thread library contains code for creating and destroying threads, for passing message and data between threads, for scheduling thread execution

11. Kernel Level Threads:- Thread management done by the Kernel. There is no thread management code in the application area.  Kernel threads are supported directly by the operating system. Any application can be programmed to be multithreaded.

12. Multithreading Models Some operating system provide a combined user level thread and Kernel level thread facility. Solaris is a good example of this combined approach.

13. Multithreading models are three types Many to many relationship. Many to one relationship. One to one relationship.

14. Many to Many Model

15. Many to One Model

16. One to One Model

17. Difference between User Level & Kernel Level Thread • User Level Threads • User level threads are faster to create and manage. • Implementation is by a thread library at the user level. • Kernel Level Thread • Kernel level threads are slower to create and manage. • Operating system supports creation of Kernel threads.

18. • User level thread is generic and can run on any operating system. • Multi-threaded application cannot take advantage of multiprocessing. • Kernel level thread is specific to the operating system. • Kernel routines themselves can be multithreaded.

Thread (Operating System)

Recommended

More Related Content

What's hot (20)

Similar to Thread (Operating System) (20)

More from kiran Patel (11)

Recently uploaded (20)

Thread (Operating System)