Denture Lining Materials
1
Dr. Sadaf Humayoun
Associate Professor & HOD Dental Materials
Rawal Institute of Health Sciences
Denture lining materials
“ Denture Relining is a procedure used to resurface
the tissue side of a denture with new base material,
producing an accurate adaptation to the denture
foundation area” ( GPT 2005)
• Classified into 3 main groups
1. Hard reline materials.
2. Tissue conditioners.
3. Soft lining materials.
2
Denture lining materials
Indications Contraindications
In cases where fitting surfaces of acrylic
dentures needs replacement, due to
bone resorption, to improve the fit of
the denture.
Poor quality denture base
In immediate dentures, after 3-6
months of their construction.
Exaggerated bone resorption
Loose denture at the time of delivery Abused or traumatic oral tissues
Geriatric or chronically ill patient,
unable to tolerate a hard denture base.
Poor teeth arrangement
To heal traumatized soft tissues before
recording an impression
Unsatisfactory jaw relationship
Speech problems
Undercuts
TMJ problems
Denture lining materials
Classified into 3 main groups
1. Hard reline materials.
2. Tissue conditioners.
3. Soft lining materials.
a) Temporary soft liners
b) Permanent soft liners
1. Hard reline materials
Chair side relining technique is used.
• Divided into 2 types.
• Both types are categorized as auto
polymerizable resins.
• Both types polymerize easily at mouth or
room temperature.
5
1. Hard Reline Materials
Type 1
Powder Polymer beads Polymethylmethacrylate
Initiator Benzoyl peroxide
Pigments Inorganic salts
Liquid Monomer Methylmethacrylate
Plasticizer Di-n-butylphthalate Tg
Chemical activator Tertiary amine
6
Composition: Autopolymerizing resins ( readily polymerize at room
temperature or mouth temperature).
Type 2
Powder Polymer beads Polyethylmethacrylate
Initiator Benzoyl peroxide
Liquid Monomer Butylmethacrylate Tg
Chemical activator Tertiaty amine
Pigments Inorganic salts
1. Hard Reline Materials
Manipulation:
• Relieve the fitting surface i.e. grinding away some of the hard
surface of acrylic base.
• Powder and liquid are mixed and applied over the fitting
surface of the acrylic base.
• Seated into the patient’s mouth whilst still fluid.
• Closed mouth technique (mouth closed into gentle contact) is
used.
• The reline soon becomes rubbery having the recorded patients
soft tissue impression.
• The denture is removed from the patients mouth and is
allowed to bench cure because of exothermic heat.
• The relined denture is normally ready for trimming n polishing
within 30 minutes. 7
1. Hard Reline Materials
8
Advantages Disadvantages
It provides a chairside reline to the denture. Direct contact with the oral tissues is a disadvantage.
In cases where fitting surfaces of acrylic dentures
needs replacement, due to bone resorption, to
improve the fit of the denture.
Methyl methacrylate in the monomer may cause allergic
reaction.
In immediate dentures, after 3-6 months of their
construction.
Low values of glass transition temperature (Tg) in both
type 1 and type 2 materials may lead to increased
dimensional instability.
Loose denture at the time of delivery May become porous due to air entrapment during
mixing which decreases patient acceptance and
increases debris contamination and colonization by
microorganisms.
Geriatric or chronically ill patient Operator has little control over the thickness of the
material which may modify the vertical relationship
and may cause anteroposterior positional error or lateral
cant.
Increase in thickness of the “palate” of an upper
denture, which patients often find unacceptable
Properties:
Denture lining materials
Classified into 3 main groups
1. Hard reline materials.
2. Tissue conditioners.
3. Soft lining materials.
a) Temporary soft liners
b) Permanent soft liners
2. Tissue Conditioners
• Soft denture liners.
• Applied to the fitting surface of the denture.
• Provides temporary cushion to the fitting
surface.
• Plastic flow continues for 24-36 hours after
mixing and therefore capture a functional
shape of supporting tissues.
• Several applications in denture works.
10
Applications:
• Help in recovery of traumatized soft
tissues, due to ill-fitting dentures.
• Reduce pain and help prevent
traumatization of the wound of
patients who have undergone surgery.
• It can help in stabilization of an
immediate denture at the time of
insertion (Addition of the tooth into
the denture base that needs to be
extracted).
• It can help in recording a functional
impression of soft tissues over a
period of a few days.
2. Tissue Conditioners
2. Tissue Conditioners
Composition:
• Amount of solvent and plasticizer is very crucial.
• 7.5% - 40% of liquid contains alcohol.
• Powder may be pigmented or unpigmented.
12
Powder
Polymer
beads
Polyethymethacrylate
Liquid No monomer------ not irritant
Solvent Ethyl alcohol Tg
Plasticizer Butylphthalyl butylglycolate Tg
Physical process
2. Tissue Conditioners
Manipulation: (chairside technique)
• On mixing powder and liquid, physical process occurs.
• Smaller polymeric beads get dissolved and larger beads swell up
on absorbing solvent.
• Freshly mixed material is applied to the fitting surface of the
denture and is seated in the patients mouth while still in fluid
state.
• Fluid state of the material ensures a cushion of reasonable
thickness without undue increase in height of the denture.
• Final set material is gel-like and ideally should form a regular
layer over the whole of the fitting surface of the denture.
• High methacrylate, ethyl methacrylate, plasticizer and solvent
gives softness.
• Normally denture and patient’s soft tissues are inspected after 2-
3 days.
13
2. Tissue Conditioners
Properties:
• Non-irritant due to the absence of acrylic monomers from
the liquid component.
• Initially very soft and Viscoelastic ( perform both as a
tissue conditioner and functional impression material).
• Undergo permanent deformation under even small load.
• Material do not remain permanently soft.
• Time taken for the material to become hard and loose the
cushioning effect varies from days to a couple of weeks.
• Conditioner should be replaced after 2- 3 days till the tissue
has healed properly.
14
Denture lining materials
Classified into 3 main groups
1. Hard reline materials.
2. Tissue conditioners.
3. Soft lining materials.
a) Temporary soft liners
b) Permanent soft liners
3. Soft Lining Materials
• Can be sub divided into
a) Temporary soft lining materials.
b) Permanent soft lining materials.
16
Denture lining materials
Classified into 3 main groups
1. Hard reline materials.
2. Tissue conditioners.
3. Soft lining materials.
a) Temporary soft liners
b) Permanent soft liners
3. Soft Lining Materials
Temporary soft lining materials:
• Almost similar to tissue conditioners.
• Supplied as powder liquid formulation.
• Composition and manipulation same as tissue
conditioners.
• Viscoelastic in nature.
• Retain their softness for longer duration than tissue
conditioners i.e. up to a month or two.
• Selection of denture cleanser is very crucial for
temporary soft liners as oxygenating type cleanser,
cause surface degradation and pitting of the material.
18
3. Soft Lining Materials
Temporary soft lining materials ; Applications:
• In cases where it is not practicable to replace the conditioner every
2 – 3 days as they take longer to harden and do not require
frequent replacement.
• They may be used as a means of temporarily improving the fit of
an ill fitting denture until such a time as a new denture can be
constructed.
• As a diagnostic aid to ascertain whether the patient would benefit
from a permanent soft lining.
Both tissue conditioners and temporary soft liners will go hard
with surface becoming rough and irregular, increasing the risk
of trauma and colonization by Candida in this hardened state,
increasing the risk of a denture-induced stomatitis.
Denture lining materials
Classified into 3 main groups
1. Hard reline materials.
2. Tissue conditioners.
3. Soft lining materials.
a) Temporary soft liners
b) Permanent soft liners
3. Soft Lining Materials
Permanent soft lining materials:
• Commonly used in patients that cannot tolerate a hard base.
• In patients with thin mandibular mucosa.
• These materials should remain permanently soft for the life
time of the denture.
• Elasticity of these materials is very important.
Requirements of Permanent/ long term Soft Liners:
• Permanently soft, ideally for the life time of the denture.
• Should be elastic in order to give a cushioning effect and
prevent unacceptable distortions during service.
• The lining should adhere to the denture base.
• The material should be non-toxic, non-irritant and incapable of
sustaining the growth of harmful bacteria or fungi. 21
Available Permanent soft lining materials
22
Acrylic
Addition
Two paste
and similar
to addition
cured
silicone
elastomeric
impression
materials
Condensation
Paste: Hydroxyl
terminated
polydimethylsiloxan
e polymer with filler
& Liquid:
Crosslinking agent
(Tetraethylsilicate)
and a catalyst
(organo-tin
compound).
P:L—condensation
crosslinking reaction
with Alcohol
byproduct.
Cold cure
Chairside
technique. Can
be readily
applied to an
existing
denture.
Harden with in
a period of a
few weeks or
at best a few
months,
therefore
require regular
replacements.
Polyphosphazine
Sheet form
Silicone
Cold cure
Heat cure
Processed in the
lab at the same
time with the
acrylic base.
Powder: polyethyl
or butyl
methacrylate
beads with
initiator and
pigment.
Liquid:
butylmethacrylate
& Plasticizer
Heat cure
(Processed in lab)
Single paste of
vinyl terminated
polydimethylsilox
ane polymer with
filler and an
initiator.
Vinyl gp. undergo
chain extension,
increases viscosity
& Crosslinking,
develop elasticity.
Tendency to peel away
(Processed in lab)
3. Soft Lining Materials
Heat cure acrylic (Permanent soft liner):
• It is in powder liquid formulation.
• Powder consist of poly ethyl or poly butyl methacrylate
(rely for softness on higher methacrylate and a
plasticizer) along with some peroxide initiator and
pigment.
• Liquid consists of butyl methacrylate and plasticizer.
• Dough is formed which is then heat treated
simultaneously with the hard acrylic base in the
laboratory and are normally applied to a new denture.
23
3. Soft Lining Materials
Heat cure silicone (Permanent soft liner) :
• It is used in the same way as heat cure acrylic.
• Presented in a single paste formulation.
• Paste consist of polydimethylsiloxane polymer
with pendant or terminal vinyl groups (chain
linking and crosslinking).
• The paste also contains inert fillers and initiators
which breakdown on heating to initiate the
crosslinking reaction.
24
3. Soft Lining Materials
Cold cure silicone elastomers (Permanent soft liner):
• Both addition and condensation types are similar to the
silicone elastomers used as impression materials.
• Cold curing silicones are cured at room temperature but are
generally processed in the laboratory.
• Alternative method is to use an overcast instead of an
articulator.
Normally a cast is poured into the dentures Casts with dentures are
mounted on an articulator The fitting surface of the denture is relieved
to make space for the lining The fluid mix is applied to the fitting surface
of the denture The dentures repositioned in the casts The
articulators closed into occlusion The material allowed to set.
3. Soft Lining Materials
Polyphosphazine:
• Supplied in sheet form.
• Manipulated similar to the heat cure silicone
products.
• Polymerize by heat cure.
• Curing cycle can be,
– 74°C for 8 hours.
OR
– 74 °C for 2½ hours followed by 100 °C for 30 minutes.
26
3. Soft Lining Materials
Properties:
• All types are soft and give an adequate cushioning effect.
• Cushioning effect depends upon the thickness of material.
– 2-3 mm is sufficient for adequate cushioning effect.
• Harden through loss of alcohol and leaching of plasticizer.
• The silicones have good elastic properties and retain their shape
after setting despite being subjected to masticatory loading.
• Acrylic materials are viscoelastic and gradually become distorted.
• Adequate bond with the denture base for acrylic and heat cured
silicone products. Cold cure silicone has tendency to peel away.
• Some permanent soft liners are adversely affected by denture
cleansers. Oxygenating cleansers may cause surface pitting in
acrylic linings whilst brushing accelerates the rate of silicone soft
liners detachment.
27
Soft Lining Materials
Comparison of Acrylic & Silicone Soft Lining Materials
Acrylic Soft Liner Silicone Soft Liner
Less resilient High resilient
Hardens by time More water sorption
Good bonding with base material Poor bonding to acrylic denture base
material
Acceptable tear resistance Low tear resistance
Better abrasion resistance Low abrasion resistance
Resistant to damage by denture
cleansers
Lower resistance to damage by denture
cleansers
More susceptibility to microorganism
growth
3. Soft Lining Materials
None of the soft lining materials can be
considered truly permanent in nature since
none could be expected to last the full lifetime
of a denture, requiring regular review of
patients.
Self-administered Relining Materials
• Such products contain methacrylate or vinyl
polymers along with a plasticizer and a solvent.
• They enable patient to improve the fit of a denture
and provide a soft cushioning effect without having
to visit the dentist.
• They should be limited for short term emergency use
as long term use of such products can lead to
harmful effects on the hard and soft oral tissues such
as irritation, severe bone loss and tumors related to
their use.
Rebasing
“It is the laboratory procedure of replacing the
entire denture base material on an existing
prosthesis.”
Indications:
• Where the observed clinical changes are
moderate to severe.
• Some processing fault in the denture base for e.g.
porosity.
• Discoloration of base material.
• Where porcelain teeth have been used.

More Related Content

PPTX
Prosthodontic management of cleft lip and palate
PPTX
Heat cure acrylic
PPTX
DENTAL CERAMIC AND ITS ADVANCEMENTS.pptx
PDF
Mechanical Properties of Dental Materials
PPTX
bite registeration.pptx
PDF
Dental ceramics part 2
PPT
Classification of malocclusion
PPTX
Denture base materials
Prosthodontic management of cleft lip and palate
Heat cure acrylic
DENTAL CERAMIC AND ITS ADVANCEMENTS.pptx
Mechanical Properties of Dental Materials
bite registeration.pptx
Dental ceramics part 2
Classification of malocclusion
Denture base materials

What's hot (20)

PPTX
Dental ceramics
PPT
Investment materials and investing techniques
PPTX
luting cement
PPTX
Adhesion & Bonding in Dentistry
PPT
Investment materials
PPTX
Investment materials
DOC
Wax pattern
PPTX
Impression Techniques in Fixed partial denture
PPTX
Casting defects
PPTX
Elastomers
PPTX
Dental Casting alloy
PPTX
Biocompatibility of dental materials- kelly
PPT
recent advances in impression materials
PPTX
Die materials
PPT
elastic impression materials.ppt
PPTX
Indirect composite restorations
PPTX
Tissue conditioners
PPTX
Impression materials in prosthodontics
PPT
Die materials /certified fixed orthodontic courses by Indian dental academy
PPTX
Pressable ceramics
Dental ceramics
Investment materials and investing techniques
luting cement
Adhesion & Bonding in Dentistry
Investment materials
Investment materials
Wax pattern
Impression Techniques in Fixed partial denture
Casting defects
Elastomers
Dental Casting alloy
Biocompatibility of dental materials- kelly
recent advances in impression materials
Die materials
elastic impression materials.ppt
Indirect composite restorations
Tissue conditioners
Impression materials in prosthodontics
Die materials /certified fixed orthodontic courses by Indian dental academy
Pressable ceramics
Ad

Similar to topic 4 Denture Lining Materiioals.pptx (20)

PDF
Denture Relining Materials - Applied Dental Sciences
PPTX
Soft liners and tissue conditioners
PDF
Rellining an rebasing prosthodontics
PPTX
Impression Material
PPTX
relining and rebasing
PPTX
Denture Relining and Rebasing Slides .pptx
PDF
Tissue-conditioners
PPTX
impression materials in dentistry class presentation
PPTX
primary impression materials in CD.pptx 12
PPTX
Journal Club for prosthodontics
PPTX
Pulp protection
PPT
Relining & rebasing
PPT
Impression in FPD.ppt
PPTX
Impression material and technique
PPT
tissue conditioners 4th yr.ppthbhjjhsgjygdu
PPTX
pulp protection varinsh pptx of conservative
PDF
Custom impression cd
PPTX
Restorative Materials in pediatric dentistry.pptx
PPTX
chapter five impression compound.pptx
PPT
provi.ppt
Denture Relining Materials - Applied Dental Sciences
Soft liners and tissue conditioners
Rellining an rebasing prosthodontics
Impression Material
relining and rebasing
Denture Relining and Rebasing Slides .pptx
Tissue-conditioners
impression materials in dentistry class presentation
primary impression materials in CD.pptx 12
Journal Club for prosthodontics
Pulp protection
Relining & rebasing
Impression in FPD.ppt
Impression material and technique
tissue conditioners 4th yr.ppthbhjjhsgjygdu
pulp protection varinsh pptx of conservative
Custom impression cd
Restorative Materials in pediatric dentistry.pptx
chapter five impression compound.pptx
provi.ppt
Ad

More from SamanArshad11 (20)

PPTX
2 Anatogghhghhhmy2 lumbar vertebrae.pptx
PPTX
13.Kine II Sfhgggggggggghguspension-I.pptx
PPTX
MANAGEMENT OF PATIENTS WITH RENAL AND HEPATIC CONDITIONS.pptx
PPTX
Hypothyroidismfhffjggvjjhnjnvvdvsdvs.pptx
PPTX
Lecture 4 Cartilage and osification.pptx
PPT
gingival enlarvhvhnvnhvnvvnvnvhnbgment.ppt
PPTX
161573-virus-temvjhvnvnvnnvplate-16x9.pptx
PPTX
cirrhosis complicatigfvesdvfsfvrfvons.pptx
PPTX
Aortic Valve Diseases fdsfgsrdfd (1).pptx
PPTX
1645032866577_Preoperative health assessment & physical examination.pptx
PPTX
3dmcomplicationscld-121211215105-phpapp02-converted.pptx
PPTX
DENGUE MCjgugugigiguhujhjhuhjjhughyjQS .pptx
PPTX
Toxic shock syndromvje - kawasaki 2019.pptx
PPTX
CELL PHYSIOLO 7vv7v7vyv7yv7yvy7vy7vy8vu8gGY.pptx
PPTX
Lecture 2 Integumentart7tv7v7v6vy System.pptx
PPTX
FOP bdhhd dbdb dhdbd dbdbdbdbdbdb (1).pptx
PPTX
Lecture 07 8 LCA gyhjvjfjfv jfuf(2).pptx
PPTX
Lecture-5b - BCD Adder and Carry Propagation, Comparator (2).pptx
PPTX
042 oral patjlofy asvher sybchg jugv.pptx
PPT
Lecture#1-Fundamental bt nch xhhs (1).ppt
2 Anatogghhghhhmy2 lumbar vertebrae.pptx
13.Kine II Sfhgggggggggghguspension-I.pptx
MANAGEMENT OF PATIENTS WITH RENAL AND HEPATIC CONDITIONS.pptx
Hypothyroidismfhffjggvjjhnjnvvdvsdvs.pptx
Lecture 4 Cartilage and osification.pptx
gingival enlarvhvhnvnhvnvvnvnvhnbgment.ppt
161573-virus-temvjhvnvnvnnvplate-16x9.pptx
cirrhosis complicatigfvesdvfsfvrfvons.pptx
Aortic Valve Diseases fdsfgsrdfd (1).pptx
1645032866577_Preoperative health assessment & physical examination.pptx
3dmcomplicationscld-121211215105-phpapp02-converted.pptx
DENGUE MCjgugugigiguhujhjhuhjjhughyjQS .pptx
Toxic shock syndromvje - kawasaki 2019.pptx
CELL PHYSIOLO 7vv7v7vyv7yv7yvy7vy7vy8vu8gGY.pptx
Lecture 2 Integumentart7tv7v7v6vy System.pptx
FOP bdhhd dbdb dhdbd dbdbdbdbdbdb (1).pptx
Lecture 07 8 LCA gyhjvjfjfv jfuf(2).pptx
Lecture-5b - BCD Adder and Carry Propagation, Comparator (2).pptx
042 oral patjlofy asvher sybchg jugv.pptx
Lecture#1-Fundamental bt nch xhhs (1).ppt

Recently uploaded (20)

PPTX
5. PPT Bersikap Kreatif.pptxjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
PPTX
Purple Pink Gradient Modern Metaverse Presentation_20250817_191428_0000.pptx
PDF
GENERATOR AND IMPROVED COIL THEREFOR HAVINGELECTRODYNAMIC PROPERTIES
PPTX
Chapter no 8 output devices dpart 2.pptx
PPTX
Computer Hardware - Technology and Livelihood Education
PPT
Access List. Configuration of Layer three Router Access List
PPTX
vinay_mahavar_industrial_training_3D.pptx
PPT
COA______________₹₹_₹₹33₹₹₹33₹₹₹3UNIT1V8.ppt
PPTX
Malnutrition_Presentation_Revised.pptxhwjsjjsjs
PDF
Instit16health2.pdfghujjjgjkkggikjhgghhhjj
PPTX
vinay_mahavar_enhanddsfsdfssdfssfced.pptx
PPSX
Presentatiohdhdhdhdhdhfhfbfhrrbrurbrurbn.ppsx
DOC
咨询SBC毕业证学历认证,林顿伍德大学毕业证买大学文凭
PPTX
Operating_Systems_Presentation_With_Icons (1).pptx
PPTX
Orange and Purple Gradient Computer Networking Technology Presentation.pptx
PPTX
Quiz template 300 pages advanced and Tech friendly
PPTX
Presentation societal project DEEPIKA T.pptx
PPTX
ppt to the world finance to the world in growing
PPTX
UAV WHAT MINERAL ARE REQUIRED FOR MAKING OF UAV
PPTX
Installation and Maintenance in Hardware
5. PPT Bersikap Kreatif.pptxjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
Purple Pink Gradient Modern Metaverse Presentation_20250817_191428_0000.pptx
GENERATOR AND IMPROVED COIL THEREFOR HAVINGELECTRODYNAMIC PROPERTIES
Chapter no 8 output devices dpart 2.pptx
Computer Hardware - Technology and Livelihood Education
Access List. Configuration of Layer three Router Access List
vinay_mahavar_industrial_training_3D.pptx
COA______________₹₹_₹₹33₹₹₹33₹₹₹3UNIT1V8.ppt
Malnutrition_Presentation_Revised.pptxhwjsjjsjs
Instit16health2.pdfghujjjgjkkggikjhgghhhjj
vinay_mahavar_enhanddsfsdfssdfssfced.pptx
Presentatiohdhdhdhdhdhfhfbfhrrbrurbrurbn.ppsx
咨询SBC毕业证学历认证,林顿伍德大学毕业证买大学文凭
Operating_Systems_Presentation_With_Icons (1).pptx
Orange and Purple Gradient Computer Networking Technology Presentation.pptx
Quiz template 300 pages advanced and Tech friendly
Presentation societal project DEEPIKA T.pptx
ppt to the world finance to the world in growing
UAV WHAT MINERAL ARE REQUIRED FOR MAKING OF UAV
Installation and Maintenance in Hardware

topic 4 Denture Lining Materiioals.pptx

  • 1. Denture Lining Materials 1 Dr. Sadaf Humayoun Associate Professor & HOD Dental Materials Rawal Institute of Health Sciences
  • 2. Denture lining materials “ Denture Relining is a procedure used to resurface the tissue side of a denture with new base material, producing an accurate adaptation to the denture foundation area” ( GPT 2005) • Classified into 3 main groups 1. Hard reline materials. 2. Tissue conditioners. 3. Soft lining materials. 2
  • 3. Denture lining materials Indications Contraindications In cases where fitting surfaces of acrylic dentures needs replacement, due to bone resorption, to improve the fit of the denture. Poor quality denture base In immediate dentures, after 3-6 months of their construction. Exaggerated bone resorption Loose denture at the time of delivery Abused or traumatic oral tissues Geriatric or chronically ill patient, unable to tolerate a hard denture base. Poor teeth arrangement To heal traumatized soft tissues before recording an impression Unsatisfactory jaw relationship Speech problems Undercuts TMJ problems
  • 4. Denture lining materials Classified into 3 main groups 1. Hard reline materials. 2. Tissue conditioners. 3. Soft lining materials. a) Temporary soft liners b) Permanent soft liners
  • 5. 1. Hard reline materials Chair side relining technique is used. • Divided into 2 types. • Both types are categorized as auto polymerizable resins. • Both types polymerize easily at mouth or room temperature. 5
  • 6. 1. Hard Reline Materials Type 1 Powder Polymer beads Polymethylmethacrylate Initiator Benzoyl peroxide Pigments Inorganic salts Liquid Monomer Methylmethacrylate Plasticizer Di-n-butylphthalate Tg Chemical activator Tertiary amine 6 Composition: Autopolymerizing resins ( readily polymerize at room temperature or mouth temperature). Type 2 Powder Polymer beads Polyethylmethacrylate Initiator Benzoyl peroxide Liquid Monomer Butylmethacrylate Tg Chemical activator Tertiaty amine Pigments Inorganic salts
  • 7. 1. Hard Reline Materials Manipulation: • Relieve the fitting surface i.e. grinding away some of the hard surface of acrylic base. • Powder and liquid are mixed and applied over the fitting surface of the acrylic base. • Seated into the patient’s mouth whilst still fluid. • Closed mouth technique (mouth closed into gentle contact) is used. • The reline soon becomes rubbery having the recorded patients soft tissue impression. • The denture is removed from the patients mouth and is allowed to bench cure because of exothermic heat. • The relined denture is normally ready for trimming n polishing within 30 minutes. 7
  • 8. 1. Hard Reline Materials 8 Advantages Disadvantages It provides a chairside reline to the denture. Direct contact with the oral tissues is a disadvantage. In cases where fitting surfaces of acrylic dentures needs replacement, due to bone resorption, to improve the fit of the denture. Methyl methacrylate in the monomer may cause allergic reaction. In immediate dentures, after 3-6 months of their construction. Low values of glass transition temperature (Tg) in both type 1 and type 2 materials may lead to increased dimensional instability. Loose denture at the time of delivery May become porous due to air entrapment during mixing which decreases patient acceptance and increases debris contamination and colonization by microorganisms. Geriatric or chronically ill patient Operator has little control over the thickness of the material which may modify the vertical relationship and may cause anteroposterior positional error or lateral cant. Increase in thickness of the “palate” of an upper denture, which patients often find unacceptable Properties:
  • 9. Denture lining materials Classified into 3 main groups 1. Hard reline materials. 2. Tissue conditioners. 3. Soft lining materials. a) Temporary soft liners b) Permanent soft liners
  • 10. 2. Tissue Conditioners • Soft denture liners. • Applied to the fitting surface of the denture. • Provides temporary cushion to the fitting surface. • Plastic flow continues for 24-36 hours after mixing and therefore capture a functional shape of supporting tissues. • Several applications in denture works. 10
  • 11. Applications: • Help in recovery of traumatized soft tissues, due to ill-fitting dentures. • Reduce pain and help prevent traumatization of the wound of patients who have undergone surgery. • It can help in stabilization of an immediate denture at the time of insertion (Addition of the tooth into the denture base that needs to be extracted). • It can help in recording a functional impression of soft tissues over a period of a few days. 2. Tissue Conditioners
  • 12. 2. Tissue Conditioners Composition: • Amount of solvent and plasticizer is very crucial. • 7.5% - 40% of liquid contains alcohol. • Powder may be pigmented or unpigmented. 12 Powder Polymer beads Polyethymethacrylate Liquid No monomer------ not irritant Solvent Ethyl alcohol Tg Plasticizer Butylphthalyl butylglycolate Tg Physical process
  • 13. 2. Tissue Conditioners Manipulation: (chairside technique) • On mixing powder and liquid, physical process occurs. • Smaller polymeric beads get dissolved and larger beads swell up on absorbing solvent. • Freshly mixed material is applied to the fitting surface of the denture and is seated in the patients mouth while still in fluid state. • Fluid state of the material ensures a cushion of reasonable thickness without undue increase in height of the denture. • Final set material is gel-like and ideally should form a regular layer over the whole of the fitting surface of the denture. • High methacrylate, ethyl methacrylate, plasticizer and solvent gives softness. • Normally denture and patient’s soft tissues are inspected after 2- 3 days. 13
  • 14. 2. Tissue Conditioners Properties: • Non-irritant due to the absence of acrylic monomers from the liquid component. • Initially very soft and Viscoelastic ( perform both as a tissue conditioner and functional impression material). • Undergo permanent deformation under even small load. • Material do not remain permanently soft. • Time taken for the material to become hard and loose the cushioning effect varies from days to a couple of weeks. • Conditioner should be replaced after 2- 3 days till the tissue has healed properly. 14
  • 15. Denture lining materials Classified into 3 main groups 1. Hard reline materials. 2. Tissue conditioners. 3. Soft lining materials. a) Temporary soft liners b) Permanent soft liners
  • 16. 3. Soft Lining Materials • Can be sub divided into a) Temporary soft lining materials. b) Permanent soft lining materials. 16
  • 17. Denture lining materials Classified into 3 main groups 1. Hard reline materials. 2. Tissue conditioners. 3. Soft lining materials. a) Temporary soft liners b) Permanent soft liners
  • 18. 3. Soft Lining Materials Temporary soft lining materials: • Almost similar to tissue conditioners. • Supplied as powder liquid formulation. • Composition and manipulation same as tissue conditioners. • Viscoelastic in nature. • Retain their softness for longer duration than tissue conditioners i.e. up to a month or two. • Selection of denture cleanser is very crucial for temporary soft liners as oxygenating type cleanser, cause surface degradation and pitting of the material. 18
  • 19. 3. Soft Lining Materials Temporary soft lining materials ; Applications: • In cases where it is not practicable to replace the conditioner every 2 – 3 days as they take longer to harden and do not require frequent replacement. • They may be used as a means of temporarily improving the fit of an ill fitting denture until such a time as a new denture can be constructed. • As a diagnostic aid to ascertain whether the patient would benefit from a permanent soft lining. Both tissue conditioners and temporary soft liners will go hard with surface becoming rough and irregular, increasing the risk of trauma and colonization by Candida in this hardened state, increasing the risk of a denture-induced stomatitis.
  • 20. Denture lining materials Classified into 3 main groups 1. Hard reline materials. 2. Tissue conditioners. 3. Soft lining materials. a) Temporary soft liners b) Permanent soft liners
  • 21. 3. Soft Lining Materials Permanent soft lining materials: • Commonly used in patients that cannot tolerate a hard base. • In patients with thin mandibular mucosa. • These materials should remain permanently soft for the life time of the denture. • Elasticity of these materials is very important. Requirements of Permanent/ long term Soft Liners: • Permanently soft, ideally for the life time of the denture. • Should be elastic in order to give a cushioning effect and prevent unacceptable distortions during service. • The lining should adhere to the denture base. • The material should be non-toxic, non-irritant and incapable of sustaining the growth of harmful bacteria or fungi. 21
  • 22. Available Permanent soft lining materials 22 Acrylic Addition Two paste and similar to addition cured silicone elastomeric impression materials Condensation Paste: Hydroxyl terminated polydimethylsiloxan e polymer with filler & Liquid: Crosslinking agent (Tetraethylsilicate) and a catalyst (organo-tin compound). P:L—condensation crosslinking reaction with Alcohol byproduct. Cold cure Chairside technique. Can be readily applied to an existing denture. Harden with in a period of a few weeks or at best a few months, therefore require regular replacements. Polyphosphazine Sheet form Silicone Cold cure Heat cure Processed in the lab at the same time with the acrylic base. Powder: polyethyl or butyl methacrylate beads with initiator and pigment. Liquid: butylmethacrylate & Plasticizer Heat cure (Processed in lab) Single paste of vinyl terminated polydimethylsilox ane polymer with filler and an initiator. Vinyl gp. undergo chain extension, increases viscosity & Crosslinking, develop elasticity. Tendency to peel away (Processed in lab)
  • 23. 3. Soft Lining Materials Heat cure acrylic (Permanent soft liner): • It is in powder liquid formulation. • Powder consist of poly ethyl or poly butyl methacrylate (rely for softness on higher methacrylate and a plasticizer) along with some peroxide initiator and pigment. • Liquid consists of butyl methacrylate and plasticizer. • Dough is formed which is then heat treated simultaneously with the hard acrylic base in the laboratory and are normally applied to a new denture. 23
  • 24. 3. Soft Lining Materials Heat cure silicone (Permanent soft liner) : • It is used in the same way as heat cure acrylic. • Presented in a single paste formulation. • Paste consist of polydimethylsiloxane polymer with pendant or terminal vinyl groups (chain linking and crosslinking). • The paste also contains inert fillers and initiators which breakdown on heating to initiate the crosslinking reaction. 24
  • 25. 3. Soft Lining Materials Cold cure silicone elastomers (Permanent soft liner): • Both addition and condensation types are similar to the silicone elastomers used as impression materials. • Cold curing silicones are cured at room temperature but are generally processed in the laboratory. • Alternative method is to use an overcast instead of an articulator. Normally a cast is poured into the dentures Casts with dentures are mounted on an articulator The fitting surface of the denture is relieved to make space for the lining The fluid mix is applied to the fitting surface of the denture The dentures repositioned in the casts The articulators closed into occlusion The material allowed to set.
  • 26. 3. Soft Lining Materials Polyphosphazine: • Supplied in sheet form. • Manipulated similar to the heat cure silicone products. • Polymerize by heat cure. • Curing cycle can be, – 74°C for 8 hours. OR – 74 °C for 2½ hours followed by 100 °C for 30 minutes. 26
  • 27. 3. Soft Lining Materials Properties: • All types are soft and give an adequate cushioning effect. • Cushioning effect depends upon the thickness of material. – 2-3 mm is sufficient for adequate cushioning effect. • Harden through loss of alcohol and leaching of plasticizer. • The silicones have good elastic properties and retain their shape after setting despite being subjected to masticatory loading. • Acrylic materials are viscoelastic and gradually become distorted. • Adequate bond with the denture base for acrylic and heat cured silicone products. Cold cure silicone has tendency to peel away. • Some permanent soft liners are adversely affected by denture cleansers. Oxygenating cleansers may cause surface pitting in acrylic linings whilst brushing accelerates the rate of silicone soft liners detachment. 27
  • 28. Soft Lining Materials Comparison of Acrylic & Silicone Soft Lining Materials Acrylic Soft Liner Silicone Soft Liner Less resilient High resilient Hardens by time More water sorption Good bonding with base material Poor bonding to acrylic denture base material Acceptable tear resistance Low tear resistance Better abrasion resistance Low abrasion resistance Resistant to damage by denture cleansers Lower resistance to damage by denture cleansers More susceptibility to microorganism growth
  • 29. 3. Soft Lining Materials None of the soft lining materials can be considered truly permanent in nature since none could be expected to last the full lifetime of a denture, requiring regular review of patients.
  • 30. Self-administered Relining Materials • Such products contain methacrylate or vinyl polymers along with a plasticizer and a solvent. • They enable patient to improve the fit of a denture and provide a soft cushioning effect without having to visit the dentist. • They should be limited for short term emergency use as long term use of such products can lead to harmful effects on the hard and soft oral tissues such as irritation, severe bone loss and tumors related to their use.
  • 31. Rebasing “It is the laboratory procedure of replacing the entire denture base material on an existing prosthesis.” Indications: • Where the observed clinical changes are moderate to severe. • Some processing fault in the denture base for e.g. porosity. • Discoloration of base material. • Where porcelain teeth have been used.