Volvo ew145b Manual Instant Download Pdf
0 likes•28 views
Volvo ew145b Manual.pdf, This technical manual provides instructions for servicing. It contains sections on specifications, identification numbers, tools, component locations, schematics, theory of operation, operation and diagnostics, tests and adjustments, and repair. The introduction explains that the manual is intended for experienced technicians and contains product-specific information organized into relevant sections. Safety precautions are outlined, including proper use of protective equipment and safe work practices when handling batteries, pressurized fluids, and other hazards.
![Service Information
Document Title: Function Group: Information Type: Date:
Engine, description (Deutz
D6D EOE2)
200 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Go back to Index Page
The engine is a 6–cylinder, 4–stroke, direct injected, turbocharged, aftercooled with a cast iron block and cylinder head.
Gears in the engine gear case are hardened helical type for strength and reduced noise, arranged to provide quiet, smooth
transmission of power.
The cylinder block and head are designed with internal passages forming galleries for both lubricating oil and coolant.
The fan belt is a poly type V-belt for improved performance and an auto tension adjuster maintains belt tension.
Starter side view
Figure 1
Engine, starter side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Coolant inlet (from radiator)
Coolant outlet (to radiator)
Coolant make up port
Air inlet (from air cleaner)
Turbocharger
Intake manifold
Exhaust manifold
Starter
Poly-V belt
Lube oil pipe (supply)
Lube oil pipe (return)
download manual
How much does a Volvo Ew145b weigh?
olvo ew145b
V manual
Engine, description (Deutz D6D EOE2)](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-1-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Go back to Index Page
Engine, description
D6E - tier 3 compliant
The D6E configuration is a four stroke, straight six cylinder, turbocharged, direct injected diesel engine with charge air
cooling and wet, replaceable cylinder liners.
The D6E engine uses a Common Rail Fuel System controlled by the engine electronic control (E-ECU) software.
Electronically controlled IEGR (Internal Exhaust Gas Recirculation) reduces NO formation and lowers emissions without the
need for exhaust after treatment. Volvo's latest engine management system, E-ECU is used to control all engine electronic
functions.
The cylinders are numbered consecutively beginning at the flywheel end. Engine rotational direction is counterclockwise as
seen from the flywheel end.
Figure 1
Engine, D6E](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-4-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Engine, tightening torques 200 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Engine, tightening torques
NOTICE
Regarding bolted joints which are not listed here, see “Volvo standard tightening torques”
Engine, tightening torque
Rocker arm bracket on cylinder head 30 Nm (22.2 lbf ft)
Cylinder head cover (M6) on cylinder head 13 Nm (9.6 lbf ft)
Exhaust return module on cylinder head Step 1: 10 Nm (7.4 lbf ft)
Step 2: 30 Nm (22.2 lbf ft)
Lock nut, valve adjusting screw 20 ±2 Nm (14.8 ±1.5 lbf ft)
Locking screw on cylinder head 34 Nm (25.2 lbf ft)
Solenoid valve on cylinder head 24 Nm (17.8 lbf ft)
Front cover on crankcase Step 1: 3 Nm (2.2 lbf ft)
Step 2: 21 Nm (15.5 lbf ft)
Drain plug on oil pan, M18 55 Nm (40.7 lbf ft)
Crankcase ventilation on cylinder head 21 Nm (15.5 lbf ft)
Return line to return stop valve 30 Nm (22.2 lbf ft)
Return stop valve to crankcase 80 Nm (59.2 lbf ft)
Impulse transmitter (crankshaft) on holder on front cover 9 Nm (6.7 lbf ft)
Impulse transmitter (camshaft) on gearcase 9 Nm (6.7 lbf ft)
Turbocharger on exhaust manifold 42 Nm (31.1 lbf ft)
Clamping shoe injector on cylinder head 16 Nm (11.8 lbf ft)
Injection lines on rail and injector, high pressure line on high-pressure
pump
25 Nm (18.5 lbf ft)
Fuel supply pump on holder 22 Nm (16.3 lbf ft)
Holder fuel supply pump on holder 30 Nm (22.2 lbf ft)
V-belt pulley on fuel supply pump 27 Nm (20.0 lbf ft)
High pressure pump on crankcase, M10 Step 1: 10 Nm (7.4 lbf ft)
Step 2: 50 Nm (37.0 lbf ft)
Fuel control valve 30 Nm (22.2 lbf ft)
Fuel pipe on high pressure pump 29 Nm (21.5 lbf ft)
Fuel pipe on control block 39 Nm (28.9 lbf ft)
Rail on cylinder head 30 Nm (22.2 lbf ft)
Pressure relief valve on rail 100 Nm (74.0 lbf ft)
Rail pressure sensor on rail 70 Nm (51.8 lbf ft)
Pipe clips, fuel line fastening 30 Nm (22.2 lbf ft)
Fuel line on control block, fuel filter console and rail 39 Nm (28.9 lbf ft)
Fuel pipe (return) on control block 49 Nm (36.3 lbf ft)
Fuel pipe (return) on cylinder head 29 Nm (21.5 lbf ft)
Fuel line on fuel filter8 39 Nm (28.9 lbf ft)
Fuel filter console/radiator tank on crankcase 30 Nm (22.2 lbf ft)](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-5-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Component locations 200 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Component locations
Component position, engine D6E. The following figures show the position of a number of components on engine D6E.
Figure 1
Component locations, front side
1 Engine oil filler 10 Oil dipstick
2 Transport eye 11 Power take off
3 Alternator 12 Engine oil filter
4 Fuel feed pump 13 Connection to E-ECU
5 V-rib belt drive on crankshaft 14 Fuel filter
6 V-rib belt 15 Crankcase bleeding valve
7 Automatic belt tensioner 16 High pressure fuel pump
8 Coolant pump 17 Common rail
9 Engine oil cooler 18 Injector](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-7-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Engine characteristic curve 210 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Go back to Index Page
Engine characteristic curve
Figure 1
Engine, performance curve (power according to ISO 14396)](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-9-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Engine characteristic curve 210 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Go back to Index Page
Engine characteristic curve
Figure 1
Engine, performance curve (power according to ISO 14396)](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-10-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Basic check, Engine 210 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Basic check, Engine
Purpose of the basic check
WARNING
Certain tests and checks are performed with unlocked control lockout lever. Make sure that the machine cannot
operate unexpectedly when the control lockout lever is unlocked.
The purpose of the basic check is to provide fast and accurate information about the general condition of the engine.
The basic check should be performed and evaluated according to instructions in the PC-tool VCADS Pro.
Tests included in the basic check
The basic check which is divided into the following tests should be performed after reading out error codes and checking
parameters.
Tests:
1.
2.
3.
4.
Cylinder compression, test
The purpose of the test is to show if any cylinder has a deviating compression pressure. The test replaces the old
pressure check method but does not give any absolute values.
Cylinder balancing, test
The purpose of the test is to show if there is any deviation in the fuel injection to a cylinder.
Feed pressure, test
The purpose of the test is to check that the feed pressure is as per specification.
Sensor, test
The purpose of the test is to check the function of all sensors.](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-11-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Go back to Index Page
Cylinder head, description
The cylinder head of the D6D engine is made of grey cast iron and designed as block type head. The combustion air enters
vertically and the exhaust air is discharged laterally. Inlet and outlet are located on one side of the cylinder head.](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-12-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Go back to Index Page
Cylinder head, description
The cylinder head is made of grey cast iron and is common for all cylinders. The induction air enters vertically (A) and the
exhausts leave horizontally (B). Inlets and exhaust outlets are located on the same side of the cylinder block. Inlet and
exhaust valve size is increased to optimize the gas exchange and combustion process. Valve guides are replaceable. Coolant
flow in the cylinder head is modified to accommodate an outlet controlled cooling system.
On order for the engine to fulfill governing emission standards, there are 3 cylinder head gaskets of different thicknesses
between the cylinder head and the piston.
Figure 1](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-13-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Determining cylinder head
gasket
211 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Determining cylinder head gasket
The thickness of the cylinder head gasket is responsible for the correct piston crown clearance of the engine. The
piston crown clearance (0.65 mm) essentially influences the combustion and thus:
Power
Fuel consumption
Exhaust emission
The piston crown clearance is adjusted by determining the piston projection and the thickness of the cylinder head
gasket.
Measuring piston projection
A dial gauge with a fixture is needed to measure the piston projection.
The piston is in its TDC position above the cylinder blackface.
Figure 1
Piston projection, measurement](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-14-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Fitting cylinder head 211 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Fitting cylinder head
Op nbr 21182
1. Prior to fitting the cylinder head onto the crankcase, the sealing surfaces for the cylinder head gasket must be clean
and free from oil. Pay attention to dowel sleeves.
2. Lightly oil the cylinder head bolts.
3. It is absolutely necessary to observe the bolt tightening order in the adjacent schematic.
Figure 1
Tightening order (exhaust manifold side)
Tightening torque specification:
1st step: 30 N·m (22.2 lbf·ft, 3.1 kgf·m)
2nd step: 80 N·m (59 lbf·ft, 8.2 kgf·m)
3rd step: 90° turn
Tightening order](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-16-320.jpg)
![Service Information
Document Title: Function Group: Information Type: Date:
Cylinder, description 213 Service Information 2014/4/27
Profile:
EXC, EW145B [GB]
Cylinder, description
Figure 1
Cylinder liner
1 Cylinder liner
2 Crankcase
3 Liner projection: 0.07 - 0.12 mm
D6D/D6E engine with a bore about 98 mm (3.86 in) is provided with dry, plateau-honed slip-fit cylinder liners. In case of
damage, the cylinders of the D6D/D6E series are repaired by replacing the slip-fit liners.](https://image.slidesharecdn.com/volvoew145bmanual-250802202402-18333fe4/85/Volvo-ew145b-Manual-Instant-Download-Pdf-18-320.jpg)
Volvo ew145b Manual Instant Download Pdf
- 1. Service Information Document Title: Function Group: Information Type: Date: Engine, description (Deutz D6D EOE2) 200 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Go back to Index Page The engine is a 6–cylinder, 4–stroke, direct injected, turbocharged, aftercooled with a cast iron block and cylinder head. Gears in the engine gear case are hardened helical type for strength and reduced noise, arranged to provide quiet, smooth transmission of power. The cylinder block and head are designed with internal passages forming galleries for both lubricating oil and coolant. The fan belt is a poly type V-belt for improved performance and an auto tension adjuster maintains belt tension. Starter side view Figure 1 Engine, starter side view 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Coolant inlet (from radiator) Coolant outlet (to radiator) Coolant make up port Air inlet (from air cleaner) Turbocharger Intake manifold Exhaust manifold Starter Poly-V belt Lube oil pipe (supply) Lube oil pipe (return) download manual How much does a Volvo Ew145b weigh? olvo ew145b V manual Engine, description (Deutz D6D EOE2)
- 2. 12. Engine oil pan Engine, front side view Figure 2 Engine, front side view 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Air inlet (from charge air cooler) Lifting eye (front) Alternator Fuel feed pump Coolant pump Belt tension Air outlet (to charge air cooler) Fan drive pulley Air conditioner compressor pulley Pulley with vibration damper Engine, top side view
- 3. Figure 3 Engine, top side view 1 Fuel suction port 9 Coolant make up port 2 Engine oil filter 10 Coolant outlet (to radiator) 3 Fuel filter 11 Blowby gas pipe 4 Unit injection pump 12 Air inlet (from air cleaner) 5 Emission label 13 Turbocharger 6 Engine name plate 14 Exhaust gas outlet 7 Power take off device 15 Exhaust manifold 8 Fan drive 16 Intake manifold Engine, rear side view Figure 4 Engine, rear side view 1. 2. 3. 4. Flywheel Lifting eye (rear) Crankcase breather Coolant temperature sensor port
- 4. Service Information Document Title: Function Group: Information Type: Date: Engine, description 200 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Go back to Index Page Engine, description D6E - tier 3 compliant The D6E configuration is a four stroke, straight six cylinder, turbocharged, direct injected diesel engine with charge air cooling and wet, replaceable cylinder liners. The D6E engine uses a Common Rail Fuel System controlled by the engine electronic control (E-ECU) software. Electronically controlled IEGR (Internal Exhaust Gas Recirculation) reduces NO formation and lowers emissions without the need for exhaust after treatment. Volvo's latest engine management system, E-ECU is used to control all engine electronic functions. The cylinders are numbered consecutively beginning at the flywheel end. Engine rotational direction is counterclockwise as seen from the flywheel end. Figure 1 Engine, D6E
- 5. Service Information Document Title: Function Group: Information Type: Date: Engine, tightening torques 200 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Engine, tightening torques NOTICE Regarding bolted joints which are not listed here, see “Volvo standard tightening torques” Engine, tightening torque Rocker arm bracket on cylinder head 30 Nm (22.2 lbf ft) Cylinder head cover (M6) on cylinder head 13 Nm (9.6 lbf ft) Exhaust return module on cylinder head Step 1: 10 Nm (7.4 lbf ft) Step 2: 30 Nm (22.2 lbf ft) Lock nut, valve adjusting screw 20 ±2 Nm (14.8 ±1.5 lbf ft) Locking screw on cylinder head 34 Nm (25.2 lbf ft) Solenoid valve on cylinder head 24 Nm (17.8 lbf ft) Front cover on crankcase Step 1: 3 Nm (2.2 lbf ft) Step 2: 21 Nm (15.5 lbf ft) Drain plug on oil pan, M18 55 Nm (40.7 lbf ft) Crankcase ventilation on cylinder head 21 Nm (15.5 lbf ft) Return line to return stop valve 30 Nm (22.2 lbf ft) Return stop valve to crankcase 80 Nm (59.2 lbf ft) Impulse transmitter (crankshaft) on holder on front cover 9 Nm (6.7 lbf ft) Impulse transmitter (camshaft) on gearcase 9 Nm (6.7 lbf ft) Turbocharger on exhaust manifold 42 Nm (31.1 lbf ft) Clamping shoe injector on cylinder head 16 Nm (11.8 lbf ft) Injection lines on rail and injector, high pressure line on high-pressure pump 25 Nm (18.5 lbf ft) Fuel supply pump on holder 22 Nm (16.3 lbf ft) Holder fuel supply pump on holder 30 Nm (22.2 lbf ft) V-belt pulley on fuel supply pump 27 Nm (20.0 lbf ft) High pressure pump on crankcase, M10 Step 1: 10 Nm (7.4 lbf ft) Step 2: 50 Nm (37.0 lbf ft) Fuel control valve 30 Nm (22.2 lbf ft) Fuel pipe on high pressure pump 29 Nm (21.5 lbf ft) Fuel pipe on control block 39 Nm (28.9 lbf ft) Rail on cylinder head 30 Nm (22.2 lbf ft) Pressure relief valve on rail 100 Nm (74.0 lbf ft) Rail pressure sensor on rail 70 Nm (51.8 lbf ft) Pipe clips, fuel line fastening 30 Nm (22.2 lbf ft) Fuel line on control block, fuel filter console and rail 39 Nm (28.9 lbf ft) Fuel pipe (return) on control block 49 Nm (36.3 lbf ft) Fuel pipe (return) on cylinder head 29 Nm (21.5 lbf ft) Fuel line on fuel filter8 39 Nm (28.9 lbf ft) Fuel filter console/radiator tank on crankcase 30 Nm (22.2 lbf ft)
- 6. Fuel pressure sensor on fuel filter console 30 Nm (22.2 lbf ft) Cover plate on cylinder cover, M6 30 Nm (22.2 lbf ft)
- 7. Service Information Document Title: Function Group: Information Type: Date: Component locations 200 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Component locations Component position, engine D6E. The following figures show the position of a number of components on engine D6E. Figure 1 Component locations, front side 1 Engine oil filler 10 Oil dipstick 2 Transport eye 11 Power take off 3 Alternator 12 Engine oil filter 4 Fuel feed pump 13 Connection to E-ECU 5 V-rib belt drive on crankshaft 14 Fuel filter 6 V-rib belt 15 Crankcase bleeding valve 7 Automatic belt tensioner 16 High pressure fuel pump 8 Coolant pump 17 Common rail 9 Engine oil cooler 18 Injector
- 8. Figure 2 Component locations, flywheel side 19 Crankcase bleeding valve 26 Turbocharger 20 Charge air manifold 27 Air outlet (to charge air cooler)Coolant inlet 21 Flywheel housing 28 Coolant inlet 22 Drain plug 29 Coolant outlet 23 Oil pan 30 Air inlet (from charge air cooler) 24 Starter motor 31 Exhaust manifold 25 Oil return line from turbocharger 32 Cylinder rocker arm cover
- 9. Service Information Document Title: Function Group: Information Type: Date: Engine characteristic curve 210 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Go back to Index Page Engine characteristic curve Figure 1 Engine, performance curve (power according to ISO 14396)
- 10. Service Information Document Title: Function Group: Information Type: Date: Engine characteristic curve 210 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Go back to Index Page Engine characteristic curve Figure 1 Engine, performance curve (power according to ISO 14396)
- 11. Service Information Document Title: Function Group: Information Type: Date: Basic check, Engine 210 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Basic check, Engine Purpose of the basic check WARNING Certain tests and checks are performed with unlocked control lockout lever. Make sure that the machine cannot operate unexpectedly when the control lockout lever is unlocked. The purpose of the basic check is to provide fast and accurate information about the general condition of the engine. The basic check should be performed and evaluated according to instructions in the PC-tool VCADS Pro. Tests included in the basic check The basic check which is divided into the following tests should be performed after reading out error codes and checking parameters. Tests: 1. 2. 3. 4. Cylinder compression, test The purpose of the test is to show if any cylinder has a deviating compression pressure. The test replaces the old pressure check method but does not give any absolute values. Cylinder balancing, test The purpose of the test is to show if there is any deviation in the fuel injection to a cylinder. Feed pressure, test The purpose of the test is to check that the feed pressure is as per specification. Sensor, test The purpose of the test is to check the function of all sensors.
- 12. Service Information Document Title: Function Group: Information Type: Date: Cylinder head, description 211 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Go back to Index Page Cylinder head, description The cylinder head of the D6D engine is made of grey cast iron and designed as block type head. The combustion air enters vertically and the exhaust air is discharged laterally. Inlet and outlet are located on one side of the cylinder head.
- 13. Service Information Document Title: Function Group: Information Type: Date: Cylinder head, description 211 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Go back to Index Page Cylinder head, description The cylinder head is made of grey cast iron and is common for all cylinders. The induction air enters vertically (A) and the exhausts leave horizontally (B). Inlets and exhaust outlets are located on the same side of the cylinder block. Inlet and exhaust valve size is increased to optimize the gas exchange and combustion process. Valve guides are replaceable. Coolant flow in the cylinder head is modified to accommodate an outlet controlled cooling system. On order for the engine to fulfill governing emission standards, there are 3 cylinder head gaskets of different thicknesses between the cylinder head and the piston. Figure 1
- 14. Service Information Document Title: Function Group: Information Type: Date: Determining cylinder head gasket 211 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Determining cylinder head gasket The thickness of the cylinder head gasket is responsible for the correct piston crown clearance of the engine. The piston crown clearance (0.65 mm) essentially influences the combustion and thus: Power Fuel consumption Exhaust emission The piston crown clearance is adjusted by determining the piston projection and the thickness of the cylinder head gasket. Measuring piston projection A dial gauge with a fixture is needed to measure the piston projection. The piston is in its TDC position above the cylinder blackface. Figure 1 Piston projection, measurement
- 15. 1. 2. 3. Dial gauge Bridge Two spacer plates A. B. C. Set the dial gauge on the level of the cylinder block face to “zero”. Position the dial gauge at measuring points (C), at the piston pin axis on the piston and determine the maximum projection. Measuring points on the piston. Distance X = 90 mm This measurement is performed on each piston. The maximum measured piston projection determines the thickness of the cylinder head gasket (see table). There are 3 different gasket thicknesses identified by bores (4): 1 bore = 1.2 mm 2 bores = 1.3 mm 3 bores = 1.4 mm Piston projection Piston projection Identification of cylinder head gasket 0.33 ~ 0.55 mm 1 bore 0.56 ~ 0.65 mm 2 bores 0.66 ~ 0.76 mm 3 bores
- 16. Service Information Document Title: Function Group: Information Type: Date: Fitting cylinder head 211 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Fitting cylinder head Op nbr 21182 1. Prior to fitting the cylinder head onto the crankcase, the sealing surfaces for the cylinder head gasket must be clean and free from oil. Pay attention to dowel sleeves. 2. Lightly oil the cylinder head bolts. 3. It is absolutely necessary to observe the bolt tightening order in the adjacent schematic. Figure 1 Tightening order (exhaust manifold side) Tightening torque specification: 1st step: 30 N·m (22.2 lbf·ft, 3.1 kgf·m) 2nd step: 80 N·m (59 lbf·ft, 8.2 kgf·m) 3rd step: 90° turn Tightening order
- 17. If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading Download
- 18. Service Information Document Title: Function Group: Information Type: Date: Cylinder, description 213 Service Information 2014/4/27 Profile: EXC, EW145B [GB] Cylinder, description Figure 1 Cylinder liner 1 Cylinder liner 2 Crankcase 3 Liner projection: 0.07 - 0.12 mm D6D/D6E engine with a bore about 98 mm (3.86 in) is provided with dry, plateau-honed slip-fit cylinder liners. In case of damage, the cylinders of the D6D/D6E series are repaired by replacing the slip-fit liners.