Windows tuning guide_for_vspace

Updated 03/20/12
Windows Tuning Guide for vSpace 6®
Configuration Recommendations for Windows
Introduction
NComputing products are designed to extend standard desktop PCs and lower the average cost
of computing in almost any environment. However, the default configurations on many systems
are not optimized for this sort of multi-user environment. This document is designed to help you
streamline your host PC and operating system to bring about the best performance and
compatibility possible. It contains a variety of minor tweaks and advanced configurations that
will help you get the most out of your NComputing deployment.
Table of Contents
Introduction............................................................................................................................. 1
Windows Tuning..................................................................................................................... 2
Compatibility ....................................................................................................................... 2
Windows User Profiles .................................................................................................... 2
Remote User Configuration ............................................................................................. 2
Data Execution Prevention .............................................................................................. 3
Enable Windows 7 Themes............................................................................................. 3
Remove IE Enhanced Security Module ........................................................................... 3
Disable CD-ROM Auto play (At the Administrator’s discretion)........................................ 4
Disable UAC (User Account Controls)............................................................................. 4
Disable “First Run” Page in Internet Explorer .................................................................. 4
Performance ....................................................................................................................... 4
Windows Performance Options ....................................................................................... 4
OS Power Settings .......................................................................................................... 5
Disable Excess Processes .............................................................................................. 5
Force Off-Screen Compositing (IE 8 Only) ...................................................................... 5
Enable Software Rendering in Internet Explorer 9........................................................... 6
SMB and Explorer Traffic Optimization............................................................................ 7

WINDOWS TUNING GUIDE
WINDOWS CONFIGURATION RECOMMENDATIONS
2
Scheduled Host Reboot................................................................................................... 7
NComputing Tweaks .............................................................................................................. 7
vSpace Installation .......................................................................................................... 7
vSpace Registration ........................................................................................................ 7
L-Series Firmware Updates............................................................................................. 7
L300 Firmware Password................................................................................................ 8
Remove Remote Session Control Notification ................................................................. 8
Server Roll-over Configuration ........................................................................................ 8
Limit vSpace Sessions .................................................................................................... 8
Assorted Console Tweaks............................................................................................... 9
Auto Login on the Host.................................................................................................... 9
Exclude a Program from Hardware Acceleration ............................................................. 9
Video Acceleration Scroll Protection...............................................................................10
Summary...............................................................................................................................10
Windows Tuning
These configurations are designed to optimize the Windows operating system itself. They are
broken down into Compatibility Tweaks and Performance Tweaks.
Compatibility
Windows User Profiles
Both local and domain user accounts can be accessed through an NComputing terminal, as is
the case with a standalone PC. These are standard Windows accounts and are created and
managed through Windows in the same way you would any other user account. User accounts
accessed through an NComputing terminal will retain their folder access settings, drive
mapping, and group policies. It should be noted, however, that users on NComputing Virtual
Desktop Devices are treated as Remote users for the purpose of some settings and policies.
Remote User Configuration

3
By default, Windows only allows Terminal Services (TS) or Remote Desktop Services (RDS)
logins for Administrators and Remote Desktop Users. In order for Users to be able to log into
the host they will need to be a member of the Remote Desktop User Group. For assistance with
configuring this please refer to our Knowledge Base article
http://www.ncomputing.com/kb/Enable-Remote-Desktop-User-Access-for-vSpace-6-on-
Windows_282.html.
Data Execution Prevention
To help ensure NComputing’s services are able to run properly, Data Execution Prevention
(DEP) should be set to “Essential Windows programs and services only”. To make this
configuration, right-click My Computer and go to Properties > Advanced system settings >
Performance Settings > Data Execution Prevention (tab).
Enable Windows 7 Themes
First, install Desktop Experience in Windows Server 2008 R2:
1. Launch Server Manager and click on Features
2. In the Features Summary section, click Add Features.
3. Select the Desktop Experience check box. If you are prompted to install additional
features, click Add Required Features, and then click Next.
4. Click Install. When the installation completes, you may be required to restart your
computer.
Next, enable the Themes service:
1. Click Start > Control Panel > Administrative Tools > Services.
2. Click Themes.
3. In the Startup type list, select Automatic and then click Apply.
4. Under Service status, click Start and then click OK.
Finally, Windows 7 theme GPO:
1. Click Start > Run, type gpedit.msc and press OK
2. Drill down to User Configuration > Administrative Templates > Control Panel >
Personalization
3. Double-click “Load a specific theme”, enable it, and enter
C:WindowsResourcesEase of Access Themesbasic.theme in the “Path to
theme file:” field
Remove IE Enhanced Security Module
1. Launch Server Manager
2. Select Server Manager

4
3. Under Security Information click on Configure IE ESC
4. Set both options to “off”
Disable CD-ROM Auto play (At the Administrator’s discretion)
Setting the following registry value will prevent the CD-ROM auto-play prompt from appearing
on all terminals.
1. Click Start and then Run
2. Type “regedit” and click OK
3. Navigate to [HKLM > System > CurrentControlSet > Services > CdRom]
4. Set Autorun DWORD value to 0
Disable UAC (User Account Controls)
1. Go to Start > Control Panel > User Accounts
2. Click on User Accounts >Change User Account Control settings
3. Set the slider to Never Notify
Disable “First Run” Page in Internet Explorer
To prevent all users from needing to go through the process of Internet Explorer’s custom set up
you can instead set the following registry values:
1. Launch the Group Policy Editor (Start > Run > “gpedit.msc”)
2. Navigate to [Computer Configuration > Administrative Templates > Windows
Components > Internet Explorer]
3. Double-click “Prevent performance of First Run Customize Settings”
4. Set the value to “Enabled”
5. Once enabled, you must make one of two choices from the available drop-down menu:
a. Skip Customize Settings, and go directly to the user’s home page.
b. Skip Customize Settings, and go directly to the "Welcome to Internet Explorer" Web
page.
6. A restart may be necessary for this configuration to take effect.
Note: If you disable or do not configure this policy setting, each user will go through the regular “First Run”
process when launching Internet Explorer.
Performance
Windows Performance Options
The speed and responsiveness of your vSpace host can be easily optimized within Windows.
Disabling certain visual effects will remove graphical overhead, and by configuring the operating
system to favor application processes over services, applications become more visually
responsive, improving the overall user experience. To make these configurations, right-click
My Computer and go to Properties > Advanced system settings > Performance Settings.
From here:

5
• Visual Effects – To reduce graphical overhead, uncheck any unneeded visual effects in this
list. To remove all effects, simply click “Adjust for best performance”. It is important to
note that this will also disable the Windows Themes, and return to a Windows Classic
appearance.
• Processor Scheduling – Located under the “Advanced” tab, improve user experience by
setting this to “Programs”.
• Virtual Memory – System performance can be greatly affected by the size and
management of virtual memory, called the “Paging File”. This should be set to “System
Managed” except by advanced users.
OS Power Settings
The operating system Power Options setting should be configured to “High Performance”
(under Control Panel > Hardware > Power options). Microsoft’s default power setting gives a
false impression that vSpace CPU utilization is much higher than on previous 32-bit operating
systems.
Disable Excess Processes
To further streamline your host computer, it may be desirable to disable certain start-up
programs and background services, which will use up system resources. Navigate to Start >
Run > “msconfig” > OK to launch the System Configuration tool. Under the Services and
Startup tabs, uncheck any service or program that is not needed during start-up.
Force Off-Screen Compositing (IE 8 Only)
Certain elements of Internet Explorer’s rendering behavior are inefficient in a multi-user or
terminal services environment, and can be disabled to improve performance. These steps will
disable one such element, called “Off-Screen Compositing”:
1. Open Notepad and copy-paste the following into a new text file:
CLASS USER
CATEGORY "AdditionalSettings"
CATEGORY "InternetExplorer"
POLICY "ForceOffscreenComposition"
KEYNAME "SoftwareMicrosoftInternet ExplorerMain"
VALUENAME "Force Offscreen Composition"
VALUEON NUMERIC 1
VALUEOFF NUMERIC 0
END POLICY
END CATEGORY;
END CATEGORY;
2. Save the text document with an “.adm” extension, and a filename of your choice. (for
example, “offscreen.adm”)
3. Start the Group Policy Editor (Start > Run > “gpedit.msc”)

6
4. Under “User Configuration”, right-click “Administrative Templates” and uncheck
“filter on”
5. Right-click Administrative Templates and click “Add/Remove Templates”. Click
“Add” and point to the text file you just created. Click “Close” to apply the Template.
6. Navigate to Administrative Templates > Classic Administrative Templates and click
“Internet Explorer” to view the new policy, called “Force Offscreen Composition”.
7. Double-click this policy and change the value to “Enabled”.
Enable Software Rendering in Internet Explorer 9
In most situations, using software rendering instead of GPU rendering will improve overall web
browsing and video play back experience. To disable hardware acceleration and use software
rendering instead of hardware rendering to view the webpage, follow the steps below:
1. Click Start, Control Panel, Network and security and then click Internet Options
2. Click the Advanced tab, and then browse to the Accelerated graphics section.
3. Click to select the Use software rendering instead of GPU rendering check box.
4. Click Apply, and then click OK.
5. Close all open Internet Explorer 9 windows, and then restart Internet Explorer 9.
In some cases this setting may reset itself and revert back to GPU Rendering. To resolve this
and insure that the setting will stay on Software Rendering it you can use the following Admin
Template.
1. Open Notepad and copy-paste the following into a new text file:
CLASS USER
CATEGORY "AdditionalSettings"
CATEGORY "InternetExplorer"
POLICY "UseSoftwareRenderingInIE9"
KEYNAME "SoftwareMicrosoftInternet ExplorerMain"
VALUENAME "UseSWRender"
VALUEON NUMERIC 1
VALUEOFF NUMERIC 0
END POLICY
END CATEGORY;
END CATEGORY;
2. Save the text document with an “.adm” extension, and a filename of your choice. (for
example, “usesoftwarerendering.adm”)
3. Start the Group Policy Editor (Start > Run > “gpedit.msc”)
4. Under “User Configuration”, right-click “Administrative Templates” and uncheck
“filter on”
5. Right-click Administrative Templates and click “Add/Remove Templates”. Click
“Add” and point to the text file you just created. Click “Close” to apply the Template.
6. Navigate to Administrative Templates > Classic Administrative Templates and click
“Internet Explorer” to view the new policy, called “UseSoftwareRenderingInIE9”.
Double-click this policy and change the value to “Enabled”.

7
SMB and Explorer Traffic Optimization
To reduce excess SMB (Server Message Block) traffic and improve overall file server
performance, it is recommended that certain changes be made to the registry as part of the
general OS configuration process. Microsoft has created a write-up on these recommendations
and their associated registry locations:
http://blogs.technet.com/b/askperf/archive/2007/09/21/windows-explorer-and-smb-traffic.aspx
To save time with these configurations, you can copy the provided registry data into a text
editor, save it as “smbtweaks.reg”, and double-click it. This will run all of the registry changes
automatically, rather than requiring a time-consuming manual configuration.
Scheduled Host Reboot
Due to the large number of users logging on and off the system and the various programs and
devices that are being used it is recommended that you schedule a task to perform a daily
reboot to refresh the host’s resources. One way this can be accomplished is by scheduling a
task for off peak hours.
To schedule the task please open Task Scheduler which is located in:
Start > All Programs > Administrative Tools
1. Click Action, and select Create Basic Task
2. Create a Basic Task – Name the task reboot, click Next
3. Trigger – Select Daily, click Next
4. Action – Select Start a program, click Next
5. Start a Program –
A. Type C:WindowsSystem32shutdown.exe in the “Program/script:” field
B. Type –f –r in the “Add arguments (optional):” field
6. Click Next, and then click Finish
NComputing Tweaks
vSpace Installation
Download NComputing VSpace software from www.ncomputing.com/softwaredownload Install
the software according to recommended procedure (see User Guide at
www.ncomputing.com/documentation)
vSpace Registration
NComputing products must be registered before use. Please see the User Guide for more
information on this process (www.ncomputing.com/documentation)
L-Series Firmware Updates

8
Firmware updates are recommended for any new L300 products prior to deployment. Please
see the User Guide or search our online Knowledgebase for more information:
www.ncomputing.com/support.
L300 Firmware Password
The L300 device can be protected from tampering by setting a firmware password. This setting
can be found in Device Setup, under the “Password” tab.
Remove Remote Session Control Notification
In addition to the previous view-only capability, the NCconsole can now remotely control a user
session. If the “Ask user’s permission to view session” option is enabled in the console’s
“System Settings,” the user must grant permission before the administrator can view the
session. Once the User gives view permission, the administrator can also take control of the
user’s session without asking for additional permissions.
If no notification whatsoever is desired on the user’s screen when being monitored, the
administrator must disable the NCtray function for users. See our Knowledge Base for details on
how to disable it: http://www.ncomputing.com/kb/How-to-remove-theL-series-vSpace-6-NCtray-
icon-from-the-Windows-SystemTray_305.html
Server Roll-over Configuration
To reduce downtime in case of a server failure, multiple host pcs may be defined for a single
L300 device. If the first host is unresponsive, the L300 device will move to the next host in its
list and attempt to connect. This process repeats until a functional host pc is located. For
information on configuring this feature, please see the L300 User Guide at
www.ncomputing.com/documentation.
Limit vSpace Sessions
Administrators can limit the number of simultaneous user sessions to a value lower than
specified by the vSpace license. This can, for instance, help ensure that the number of users
and their combined workload does not exceed the host system’s capabilities. To accomplish
this, you must manually create two new Registry entries under the registry CurrentControlSet
“MultiUser” key:
EnableUserLoadBalance as a DWord with a value of 1
MaxConnectionCount as a DWord with a value less than the license count (the value
0xFFFFFFFF means use the count defined in the license)
MaxConnectionCount represents the maximum number of active client connections. Sessions
belonging to disconnected clients are NOT counted when vSpace calculates this value.

9
Assorted Console Tweaks
Within the vSpace Console, there are several settings that can be used to optimize your product
experience. These are listed below:
• Video Compression – If you’re experiencing performance issues due to the network
bandwidth needs of your L300 devices, you may limit multimedia stream quality. To
configure this, open the vSpace Console and navigate to System Settings > L-
series/M-Series (Tab). The JPEG Compression Ratio is a percentage rating of
quality. 95% means maximum video quality, at highest bandwidth. 5% is minimum
video quality, with a respectively lower bandwidth requirement. It is important to note
that by decreasing video quality, the CPU assisted compression will cause an increase
in processor usage during video streaming events. In situations where your network is
robust enough to handle higher quality video, you may see performance improvements
by setting the video quality at maximum. The ideal setting for your environment should
be determined through your own benchmarking.
• Disconnected Sessions Clean-Up Timeout – vSpace has an automatic feature which
will end any “orphaned” sessions after a predetermined interval. This feature can be
found under System Settings > Common (tab). This interval can be increased or
decreased to suit the needs of the environment. Setting it to “0” will disable it, and
orphaned sessions will remain logged in until the server is rebooted.
• Font Smoothing – The Option Enable Clear Type inside of Windows. This setting can
be found under System Settings > Performance Profiles (tab) > Advanced. This will
improve the appearance of text on certain types of monitors
Auto Login on the Host
If you wish to set up auto logon for the host this is doable from the vSpace Console.
1. Open the vSpace Console.
2. Expand NComputing vSpace
3. Click on “System Settings”
4. Check “Enable Auto Logon”
5. Type in the information for the user name and password. If you are using a Domain
admin make sure to use the fully qualified domain user name. Example:
testdomainuser
6. Click Apply
Exclude a Program from Hardware Acceleration
If a program displays frequent “blue box” flickering, it may be desirable to disable video
streaming for that application. To do so, simply add the application’s executable to the following
registry key:
HKEY Local Machine > System > CurrentControlSet >Control > Multiuser >
ExcludeVideoPlayerNameList
Each program in the list must be separated by a semicolon. For example,
“explorer.exe;firefox.exe”

10
Video Acceleration Scroll Protection
If certain applications appear to be getting accelerated when scrolling a page’s screen up and
down and this is not desired, you can instruct vSpace to specially process scrolling in such
applications to prevent streaming in this situation. Simply add the executable to this registry
setting
[HKEY Local Machine > System > CurrentControlSet >Control > Multiuser >
ScrollProtectNameList]
Each program in the list must be separated by a semicolon. For example, “firefox.exe;excel.exe”
Summary
These configurations can help create an efficient and stable vSpace Host, and consequently
deliver the best possible user experience to each connected L-series device. For more
information on recommended tips, tricks, and configurations, check out our searchable online
Knowledgebase at www.ncomputing.com/kb.
Version 1.7
© 2003-2010 NComputing Inc. All rights reserved. NComputing and vSpace are registered trademarks of NComputing Inc. – USA. Microsoft and Windows are
registered trademarks of Microsoft Corporation. All trademarks are the property of their respective owners.

Windows tuning guide_for_vspace

Recommended

More Related Content

What's hot (18)

Similar to Windows tuning guide_for_vspace (20)

Recently uploaded (20)

Windows tuning guide_for_vspace