Ripley Utility Tool WS 14A - High Voltage Pencilling Tool
0 likes750 views
This document provides information about electric utility distribution and transmission cable pencilling tools. It lists several models of pencilling tools, including the WS 16, WS 17, and WS 14A. It provides the taper length, tool length, and weight for each model. It also describes that the tools are for transmission and distribution cables, and lists the typical voltage ranges and cable sizes for each model. The document states that the pencilling operation takes less than five minutes and creates a smooth taper, while ensuring safety. It recommends using other specific stripping tools to remove insulation and shielding prior to using the pencilling tools.
Ripley Utility Tool WS 14A - High Voltage Pencilling Tool
- 1. ELECTRIC UTILITY DISTRIBUTION / TRANSMISSION Phone: 860-635-2200 U185 Cable O.D. Ordering Information • Cable sample and termination specification sheet required • Longer tapers are available on request Approx. Replacement Taper Length Tool Length Weight Model Operation Blade (inch) (mm) (inch) (mm) (lb) (Kg) WS 16 CB 5B 2 50.80 8 203.20 6 2.70 Part# 20432 Part# 10918 WS 16 CB 5B-4 2 - 4 50.80 - 101.60 8 203.20 6 2.70 Part# 20433 Part# 13402 WS 17 CB 5B-4 4 101.60 8 203.20 3 1.35 Part# 13400 SW 2 Part# 13402 WS 14A CB 15A - 4 4 101.60 Part# 10840 SW 4 Part# 11824 WS 14A CB 15A - 6 4 - 6 101.60 - 152.40 Part# 10841 SW 4 Part# 11822 WS 14A CB 15A -8 6 - 8 152.40 - 203.20 Part# 10842 SW 4 Part# 11823 WS 14A CB 15A - 10 8 - 10 203.20 - 254.00 Part# 10843 SW 4 Part# 11815 WS 14A CB 15A - 12 10 - 12 254.00 - 304.80 Part# 10844 SW 4 Part# 11816 WS 14A CB 15A - 14 12 - 14 304.80 - 355.60 Part# 10845 SW 4 Part# 11817 Plastic Handles Plastic Handles wrench wrench wrench wrench wrench wrench wrench depending on taper length average 15 6.80 13 to 20 330.20 to 508.00 WS 16 WS 17 WS 14A HIGH VOLTAGE PENCILLING TOOLS • For transmission and distribution cables – WS 16 for 35 to 69 KV cables, 1/0 to 1000MCM – WS 17 for 35 to 46 KV cables, 1/0 to 750MCM – WS 14A for 69 to 238 KV cables, cable sizes to2000MCM plus • Complete pencilling operation takes less than five minutes • Can expose conductor strand shielding if required • One tool for each cable/conductor size • Fast, smooth tapers • Safety assured with guarded cutting blade • Made in the U.S.A. • Insulation on cable end must be stripped prior to pencilling. Use Model WS 50, WS 57, WS 57A or WS 13B end strippers. Semi-con shield should also be removed prior to pencilling with WS 9A/9C, WS 40, WS 51, WS 51A or WS 57A SECONDARYDIST.PRIMARYDIST.(OH)PRIMARYDIST.(URD)SPECIALITYDIST.TRANSMISSION WWW.CABLEJOINTS.CO.UK THORNE DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK