Primitive Type isize

The pointer-sized signed integer type.

See also the std::isize module.

However, please note that examples are shared between primitive integer types. So it's normal if you see usage of types like usize in there.

Methods

impl isize

fn min_value() -> isize

Returns the smallest value that can be represented by this integer type.

Examples

assert_eq!(i8::min_value(), -128);

fn max_value() -> isize

Returns the largest value that can be represented by this integer type.

Examples

assert_eq!(i8::max_value(), 127);

fn from_str_radix(src: &str, radix: u32) -> Result<isize, ParseIntError>

Converts a string slice in a given base to an integer.

Leading and trailing whitespace represent an error.

Examples

Basic usage:

assert_eq!(i32::from_str_radix("A", 16), Ok(10));

fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

let n = -0b1000_0000i8;

assert_eq!(n.count_ones(), 1);

fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

let n = -0b1000_0000i8;

assert_eq!(n.count_zeros(), 7);

fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

let n = -1i16;

assert_eq!(n.leading_zeros(), 0);

fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

let n = -4i8;

assert_eq!(n.trailing_zeros(), 2);

fn rotate_left(self, n: u32) -> isize

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

let n = 0x0123456789ABCDEFi64;
let m = -0x76543210FEDCBA99i64;

assert_eq!(n.rotate_left(32), m);

fn rotate_right(self, n: u32) -> isize

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

let n = 0x0123456789ABCDEFi64;
let m = -0xFEDCBA987654322i64;

assert_eq!(n.rotate_right(4), m);

fn swap_bytes(self) -> isize

Reverses the byte order of the integer.

Examples

Basic usage:

let n =  0x0123456789ABCDEFi64;
let m = -0x1032547698BADCFFi64;

assert_eq!(n.swap_bytes(), m);

fn from_be(x: isize) -> isize

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "big") {
    assert_eq!(i64::from_be(n), n)
} else {
    assert_eq!(i64::from_be(n), n.swap_bytes())
}

fn from_le(x: isize) -> isize

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "little") {
    assert_eq!(i64::from_le(n), n)
} else {
    assert_eq!(i64::from_le(n), n.swap_bytes())
}

fn to_be(self) -> isize

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

fn to_le(self) -> isize

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

fn checked_add(self, other: isize) -> Option<isize>

Checked integer addition. Computes self + other, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(7i16.checked_add(32760), Some(32767));
assert_eq!(8i16.checked_add(32760), None);

fn checked_sub(self, other: isize) -> Option<isize>

Checked integer subtraction. Computes self - other, returning None if underflow occurred.

Examples

Basic usage:

assert_eq!((-127i8).checked_sub(1), Some(-128));
assert_eq!((-128i8).checked_sub(1), None);

fn checked_mul(self, other: isize) -> Option<isize>

Checked integer multiplication. Computes self * other, returning None if underflow or overflow occurred.

Examples

Basic usage:

assert_eq!(6i8.checked_mul(21), Some(126));
assert_eq!(6i8.checked_mul(22), None);

fn checked_div(self, other: isize) -> Option<isize>

Checked integer division. Computes self / other, returning None if other == 0 or the operation results in underflow or overflow.

Examples

Basic usage:

assert_eq!((-127i8).checked_div(-1), Some(127));
assert_eq!((-128i8).checked_div(-1), None);
assert_eq!((1i8).checked_div(0), None);

fn checked_rem(self, other: isize) -> Option<isize>

Checked integer remainder. Computes self % other, returning None if other == 0 or the operation results in underflow or overflow.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.checked_rem(2), Some(1));
assert_eq!(5i32.checked_rem(0), None);
assert_eq!(i32::MIN.checked_rem(-1), None);

fn checked_neg(self) -> Option<isize>

Checked negation. Computes -self, returning None if self == MIN.

Examples

Basic usage:

use std::i32;

assert_eq!(5i32.checked_neg(), Some(-5));
assert_eq!(i32::MIN.checked_neg(), None);

fn checked_shl(self, rhs: u32) -> Option<isize>

Checked shift left. Computes self << rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x10i32.checked_shl(4), Some(0x100));
assert_eq!(0x10i32.checked_shl(33), None);

fn checked_shr(self, rhs: u32) -> Option<isize>

Checked shift right. Computes self >> rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x10i32.checked_shr(4), Some(0x1));
assert_eq!(0x10i32.checked_shr(33), None);

fn checked_abs(self) -> Option<isize>

Checked absolute value. Computes self.abs(), returning None if self == MIN.

Examples

Basic usage:

use std::i32;

assert_eq!((-5i32).checked_abs(), Some(5));
assert_eq!(i32::MIN.checked_abs(), None);

fn saturating_add(self, other: isize) -> isize

Saturating integer addition. Computes self + other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100i8.saturating_add(1), 101);
assert_eq!(100i8.saturating_add(127), 127);

fn saturating_sub(self, other: isize) -> isize

Saturating integer subtraction. Computes self - other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100i8.saturating_sub(127), -27);
assert_eq!((-100i8).saturating_sub(127), -128);

fn saturating_mul(self, other: isize) -> isize

Saturating integer multiplication. Computes self * other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

use std::i32;

assert_eq!(100i32.saturating_mul(127), 12700);
assert_eq!((1i32 << 23).saturating_mul(1 << 23), i32::MAX);
assert_eq!((-1i32 << 23).saturating_mul(1 << 23), i32::MIN);

fn wrapping_add(self, rhs: isize) -> isize

Wrapping (modular) addition. Computes self + other, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(100i8.wrapping_add(27), 127);
assert_eq!(100i8.wrapping_add(127), -29);

fn wrapping_sub(self, rhs: isize) -> isize

Wrapping (modular) subtraction. Computes self - other, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(0i8.wrapping_sub(127), -127);
assert_eq!((-2i8).wrapping_sub(127), 127);

fn wrapping_mul(self, rhs: isize) -> isize

Wrapping (modular) multiplication. Computes self * other, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(10i8.wrapping_mul(12), 120);
assert_eq!(11i8.wrapping_mul(12), -124);

fn wrapping_div(self, rhs: isize) -> isize

Wrapping (modular) division. Computes self / other, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one divides MIN / -1 on a signed type (where MIN is the negative minimal value for the type); this is equivalent to -MIN, a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

assert_eq!(100u8.wrapping_div(10), 10);
assert_eq!((-128i8).wrapping_div(-1), -128);

fn wrapping_rem(self, rhs: isize) -> isize

Wrapping (modular) remainder. Computes self % other, wrapping around at the boundary of the type.

Such wrap-around never actually occurs mathematically; implementation artifacts make x % y invalid for MIN / -1 on a signed type (where MIN is the negative minimal value). In such a case, this function returns 0.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

assert_eq!(100i8.wrapping_rem(10), 0);
assert_eq!((-128i8).wrapping_rem(-1), 0);

fn wrapping_neg(self) -> isize

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one negates MIN on a signed type (where MIN is the negative minimal value for the type); this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

assert_eq!(100i8.wrapping_neg(), -100);
assert_eq!((-128i8).wrapping_neg(), -128);

fn wrapping_shl(self, rhs: u32) -> isize

Panic-free bitwise shift-left; yields self << mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-left; the RHS of a wrapping shift-left is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_left function, which may be what you want instead.

Examples

Basic usage:

assert_eq!((-1i8).wrapping_shl(7), -128);
assert_eq!((-1i8).wrapping_shl(8), -1);

fn wrapping_shr(self, rhs: u32) -> isize

Panic-free bitwise shift-right; yields self >> mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-right; the RHS of a wrapping shift-right is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_right function, which may be what you want instead.

Examples

Basic usage:

assert_eq!((-128i8).wrapping_shr(7), -1);
assert_eq!((-128i8).wrapping_shr(8), -128);

fn wrapping_abs(self) -> isize

Wrapping (modular) absolute value. Computes self.abs(), wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

assert_eq!(100i8.wrapping_abs(), 100);
assert_eq!((-100i8).wrapping_abs(), 100);
assert_eq!((-128i8).wrapping_abs(), -128);
assert_eq!((-128i8).wrapping_abs() as u8, 128);

fn overflowing_add(self, rhs: isize) -> (isize, bool)

Calculates self + rhs

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

use std::i32;

assert_eq!(5i32.overflowing_add(2), (7, false));
assert_eq!(i32::MAX.overflowing_add(1), (i32::MIN, true));

fn overflowing_sub(self, rhs: isize) -> (isize, bool)

Calculates self - rhs

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

use std::i32;

assert_eq!(5i32.overflowing_sub(2), (3, false));
assert_eq!(i32::MIN.overflowing_sub(1), (i32::MAX, true));

fn overflowing_mul(self, rhs: isize) -> (isize, bool)

Calculates the multiplication of self and rhs.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

assert_eq!(5i32.overflowing_mul(2), (10, false));
assert_eq!(1_000_000_000i32.overflowing_mul(10), (1410065408, true));

fn overflowing_div(self, rhs: isize) -> (isize, bool)

Calculates the divisor when self is divided by rhs.

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then self is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

use std::i32;

assert_eq!(5i32.overflowing_div(2), (2, false));
assert_eq!(i32::MIN.overflowing_div(-1), (i32::MIN, true));

fn overflowing_rem(self, rhs: isize) -> (isize, bool)

Calculates the remainder when self is divided by rhs.

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then 0 is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

use std::i32;

assert_eq!(5i32.overflowing_rem(2), (1, false));
assert_eq!(i32::MIN.overflowing_rem(-1), (0, true));

fn overflowing_neg(self) -> (isize, bool)

Negates self, overflowing if this is equal to the minimum value.

Returns a tuple of the negated version of self along with a boolean indicating whether an overflow happened. If self is the minimum value (e.g. i32::MIN for values of type i32), then the minimum value will be returned again and true will be returned for an overflow happening.

Examples

Basic usage

use std::i32;

assert_eq!(2i32.overflowing_neg(), (-2, false));
assert_eq!(i32::MIN.overflowing_neg(), (i32::MIN, true));

fn overflowing_shl(self, rhs: u32) -> (isize, bool)

Shifts self left by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

assert_eq!(0x10i32.overflowing_shl(4), (0x100, false));
assert_eq!(0x10i32.overflowing_shl(36), (0x100, true));

fn overflowing_shr(self, rhs: u32) -> (isize, bool)

Shifts self right by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

assert_eq!(0x10i32.overflowing_shr(4), (0x1, false));
assert_eq!(0x10i32.overflowing_shr(36), (0x1, true));

fn overflowing_abs(self) -> (isize, bool)

Computes the absolute value of self.

Returns a tuple of the absolute version of self along with a boolean indicating whether an overflow happened. If self is the minimum value (e.g. i32::MIN for values of type i32), then the minimum value will be returned again and true will be returned for an overflow happening.

Examples

Basic usage:

assert_eq!(10i8.overflowing_abs(), (10,false));
assert_eq!((-10i8).overflowing_abs(), (10,false));
assert_eq!((-128i8).overflowing_abs(), (-128,true));

fn pow(self, exp: u32) -> isize

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

let x: i32 = 2; // or any other integer type

assert_eq!(x.pow(4), 16);

fn abs(self) -> isize

Computes the absolute value of self.

Overflow behavior

The absolute value of i32::min_value() cannot be represented as an i32, and attempting to calculate it will cause an overflow. This means that code in debug mode will trigger a panic on this case and optimized code will return i32::min_value() without a panic.

Examples

Basic usage:

assert_eq!(10i8.abs(), 10);
assert_eq!((-10i8).abs(), 10);

fn signum(self) -> isize

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

assert_eq!(10i8.signum(), 1);
assert_eq!(0i8.signum(), 0);
assert_eq!((-10i8).signum(), -1);

fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

assert!(10i8.is_positive());
assert!(!(-10i8).is_positive());

fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

assert!((-10i8).is_negative());
assert!(!10i8.is_negative());

Trait Implementations

impl Eq for isize

impl Sum<isize> for isize

fn sum<I>(iter: I) -> isize where I: Iterator<Item=isize>

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a isize> for isize

fn sum<I>(iter: I) -> isize where I: Iterator<Item=&'a isize>

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Rem<isize> for isize

This operation satisfies n % d == n - (n / d) * d. The result has the same sign as the left operand.

type Output = isize

The resulting type after applying the % operator

fn rem(self, other: isize) -> isize

The method for the % operator

impl<'a> Rem<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the % operator

fn rem(self, other: isize) -> isize::Output

The method for the % operator

impl<'a> Rem<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the % operator

fn rem(self, other: &'a isize) -> isize::Output

The method for the % operator

impl<'a, 'b> Rem<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the % operator

fn rem(self, other: &'a isize) -> isize::Output

The method for the % operator

impl Shr<u8> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: u8) -> isize

The method for the >> operator

impl<'a> Shr<u8> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: u8) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a u8> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u8) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a u8> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u8) -> isize::Output

The method for the >> operator

impl Shr<u16> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: u16) -> isize

The method for the >> operator

impl<'a> Shr<u16> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: u16) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a u16> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u16) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a u16> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u16) -> isize::Output

The method for the >> operator

impl Shr<u32> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: u32) -> isize

The method for the >> operator

impl<'a> Shr<u32> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: u32) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a u32> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u32) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a u32> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u32) -> isize::Output

The method for the >> operator

impl Shr<u64> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: u64) -> isize

The method for the >> operator

impl<'a> Shr<u64> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: u64) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a u64> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u64) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a u64> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u64) -> isize::Output

The method for the >> operator

impl Shr<u128> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: u128) -> isize

The method for the >> operator

impl<'a> Shr<u128> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: u128) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a u128> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u128) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a u128> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a u128) -> isize::Output

The method for the >> operator

impl Shr<usize> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: usize) -> isize

The method for the >> operator

impl<'a> Shr<usize> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: usize) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a usize> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a usize) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a usize> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a usize) -> isize::Output

The method for the >> operator

impl Shr<i8> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: i8) -> isize

The method for the >> operator

impl<'a> Shr<i8> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: i8) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a i8> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i8) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a i8> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i8) -> isize::Output

The method for the >> operator

impl Shr<i16> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: i16) -> isize

The method for the >> operator

impl<'a> Shr<i16> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: i16) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a i16> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i16) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a i16> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i16) -> isize::Output

The method for the >> operator

impl Shr<i32> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: i32) -> isize

The method for the >> operator

impl<'a> Shr<i32> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: i32) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a i32> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i32) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a i32> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i32) -> isize::Output

The method for the >> operator

impl Shr<i64> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: i64) -> isize

The method for the >> operator

impl<'a> Shr<i64> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: i64) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a i64> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i64) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a i64> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i64) -> isize::Output

The method for the >> operator

impl Shr<i128> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: i128) -> isize

The method for the >> operator

impl<'a> Shr<i128> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: i128) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a i128> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i128) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a i128> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a i128) -> isize::Output

The method for the >> operator

impl Shr<isize> for isize

type Output = isize

The resulting type after applying the >> operator

fn shr(self, other: isize) -> isize

The method for the >> operator

impl<'a> Shr<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: isize) -> isize::Output

The method for the >> operator

impl<'a> Shr<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a isize) -> isize::Output

The method for the >> operator

impl<'a, 'b> Shr<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the >> operator

fn shr(self, other: &'a isize) -> isize::Output

The method for the >> operator

impl From<i8> for isize

fn from(small: i8) -> isize

Performs the conversion.

impl Binary for isize

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Debug for isize

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl ShlAssign<u8> for isize

fn shl_assign(&mut self, other: u8)

The method for the <<= operator

impl ShlAssign<u16> for isize

fn shl_assign(&mut self, other: u16)

The method for the <<= operator

impl ShlAssign<u32> for isize

fn shl_assign(&mut self, other: u32)

The method for the <<= operator

impl ShlAssign<u64> for isize

fn shl_assign(&mut self, other: u64)

The method for the <<= operator

impl ShlAssign<u128> for isize

fn shl_assign(&mut self, other: u128)

The method for the <<= operator

impl ShlAssign<usize> for isize

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl ShlAssign<i8> for isize

fn shl_assign(&mut self, other: i8)

The method for the <<= operator

impl ShlAssign<i16> for isize

fn shl_assign(&mut self, other: i16)

The method for the <<= operator

impl ShlAssign<i32> for isize

fn shl_assign(&mut self, other: i32)

The method for the <<= operator

impl ShlAssign<i64> for isize

fn shl_assign(&mut self, other: i64)

The method for the <<= operator

impl ShlAssign<i128> for isize

fn shl_assign(&mut self, other: i128)

The method for the <<= operator

impl ShlAssign<isize> for isize

fn shl_assign(&mut self, other: isize)

The method for the <<= operator

impl Add<isize> for isize

type Output = isize

The resulting type after applying the + operator

fn add(self, other: isize) -> isize

The method for the + operator

impl<'a> Add<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the + operator

fn add(self, other: isize) -> isize::Output

The method for the + operator

impl<'a> Add<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the + operator

fn add(self, other: &'a isize) -> isize::Output

The method for the + operator

impl<'a, 'b> Add<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the + operator

fn add(self, other: &'a isize) -> isize::Output

The method for the + operator

impl BitXorAssign<isize> for isize

fn bitxor_assign(&mut self, other: isize)

The method for the ^= operator

impl BitOrAssign<isize> for isize

fn bitor_assign(&mut self, other: isize)

The method for the |= operator

impl BitAndAssign<isize> for isize

fn bitand_assign(&mut self, other: isize)

The method for the &= operator

impl BitAnd<isize> for isize

type Output = isize

The resulting type after applying the & operator

fn bitand(self, rhs: isize) -> isize

The method for the & operator

impl<'a> BitAnd<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the & operator

fn bitand(self, other: isize) -> isize::Output

The method for the & operator

impl<'a> BitAnd<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the & operator

fn bitand(self, other: &'a isize) -> isize::Output

The method for the & operator

impl<'a, 'b> BitAnd<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the & operator

fn bitand(self, other: &'a isize) -> isize::Output

The method for the & operator

impl RemAssign<isize> for isize

fn rem_assign(&mut self, other: isize)

The method for the %= operator

impl DivAssign<isize> for isize

fn div_assign(&mut self, other: isize)

The method for the /= operator

impl Ord for isize

fn cmp(&self, other: &isize) -> Ordering

This method returns an Ordering between self and other.

impl Neg for isize

type Output = isize

The resulting type after applying the - operator

fn neg(self) -> isize

The method for the unary - operator

impl<'a> Neg for &'a isize

type Output = isize::Output

The resulting type after applying the - operator

fn neg(self) -> isize::Output

The method for the unary - operator

impl MulAssign<isize> for isize

fn mul_assign(&mut self, other: isize)

The method for the *= operator

impl Clone for isize

fn clone(&self) -> isize

Returns a deep copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl SubAssign<isize> for isize

fn sub_assign(&mut self, other: isize)

The method for the -= operator

impl Step for isize

fn step(&self, by: &isize) -> Option<isize>

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Steps self if possible.

fn steps_between(start: &isize, end: &isize, by: &isize) -> Option<usize>

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Returns the number of steps between two step objects. The count is inclusive of start and exclusive of end.

fn is_negative(&self) -> bool

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Tests whether this step is negative or not (going backwards)

fn replace_one(&mut self) -> isize

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Replaces this step with 1, returning itself

fn replace_zero(&mut self) -> isize

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Replaces this step with 0, returning itself

fn add_one(&self) -> isize

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Adds one to this step, returning the result

fn sub_one(&self) -> isize

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Subtracts one to this step, returning the result

fn steps_between_by_one(start: &isize, end: &isize) -> Option<usize>

🔬 This is a nightly-only experimental API. (step_trait #27741)

likely to be replaced by finer-grained traits

Same as steps_between, but with a by of 1

impl Hash for isize

fn hash<H>(&self, state: &mut H) where H: Hasher

Feeds this value into the state given, updating the hasher as necessary.

fn hash_slice<H>(data: &[isize], state: &mut H) where H: Hasher

Feeds a slice of this type into the state provided.

impl AddAssign<isize> for isize

fn add_assign(&mut self, other: isize)

The method for the += operator

impl ShrAssign<u8> for isize

fn shr_assign(&mut self, other: u8)

The method for the >>= operator

impl ShrAssign<u16> for isize

fn shr_assign(&mut self, other: u16)

The method for the >>= operator

impl ShrAssign<u32> for isize

fn shr_assign(&mut self, other: u32)

The method for the >>= operator

impl ShrAssign<u64> for isize

fn shr_assign(&mut self, other: u64)

The method for the >>= operator

impl ShrAssign<u128> for isize

fn shr_assign(&mut self, other: u128)

The method for the >>= operator

impl ShrAssign<usize> for isize

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl ShrAssign<i8> for isize

fn shr_assign(&mut self, other: i8)

The method for the >>= operator

impl ShrAssign<i16> for isize

fn shr_assign(&mut self, other: i16)

The method for the >>= operator

impl ShrAssign<i32> for isize

fn shr_assign(&mut self, other: i32)

The method for the >>= operator

impl ShrAssign<i64> for isize

fn shr_assign(&mut self, other: i64)

The method for the >>= operator

impl ShrAssign<i128> for isize

fn shr_assign(&mut self, other: i128)

The method for the >>= operator

impl ShrAssign<isize> for isize

fn shr_assign(&mut self, other: isize)

The method for the >>= operator

impl Sub<isize> for isize

type Output = isize

The resulting type after applying the - operator

fn sub(self, other: isize) -> isize

The method for the - operator

impl<'a> Sub<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the - operator

fn sub(self, other: isize) -> isize::Output

The method for the - operator

impl<'a> Sub<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the - operator

fn sub(self, other: &'a isize) -> isize::Output

The method for the - operator

impl<'a, 'b> Sub<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the - operator

fn sub(self, other: &'a isize) -> isize::Output

The method for the - operator

impl UpperHex for isize

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl BitOr<isize> for isize

type Output = isize

The resulting type after applying the | operator

fn bitor(self, rhs: isize) -> isize

The method for the | operator

impl<'a> BitOr<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the | operator

fn bitor(self, other: isize) -> isize::Output

The method for the | operator

impl<'a> BitOr<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the | operator

fn bitor(self, other: &'a isize) -> isize::Output

The method for the | operator

impl<'a, 'b> BitOr<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the | operator

fn bitor(self, other: &'a isize) -> isize::Output

The method for the | operator

impl Default for isize

fn default() -> isize

Returns the "default value" for a type.

impl PartialOrd<isize> for isize

fn partial_cmp(&self, other: &isize) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &isize) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &isize) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &isize) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &isize) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl Octal for isize

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Not for isize

type Output = isize

The resulting type after applying the ! operator

fn not(self) -> isize

The method for the unary ! operator

impl<'a> Not for &'a isize

type Output = isize::Output

The resulting type after applying the ! operator

fn not(self) -> isize::Output

The method for the unary ! operator

impl Zero for isize

fn zero() -> isize

Deprecated since 1.11.0

: no longer used for Iterator::sum

🔬 This is a nightly-only experimental API. (zero_one #27739)

unsure of placement, wants to use associated constants

The "zero" (usually, additive identity) for this type.

impl Mul<isize> for isize

type Output = isize

The resulting type after applying the * operator

fn mul(self, other: isize) -> isize

The method for the * operator

impl<'a> Mul<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the * operator

fn mul(self, other: isize) -> isize::Output

The method for the * operator

impl<'a> Mul<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the * operator

fn mul(self, other: &'a isize) -> isize::Output

The method for the * operator

impl<'a, 'b> Mul<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the * operator

fn mul(self, other: &'a isize) -> isize::Output

The method for the * operator

impl TryFrom<i8> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: i8) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<i16> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: i16) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<i32> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: i32) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<i64> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: i64) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<i128> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: i128) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<isize> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: isize) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<u8> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: u8) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<u16> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: u16) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<u32> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: u32) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<u64> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: u64) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<u128> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: u128) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl TryFrom<usize> for isize

type Err = TryFromIntError

🔬 This is a nightly-only experimental API. (try_from #33417)

The type returned in the event of a conversion error.

fn try_from(u: usize) -> Result<isize, TryFromIntError>

🔬 This is a nightly-only experimental API. (try_from #33417)

Performs the conversion.

impl FromStr for isize

type Err = ParseIntError

The associated error which can be returned from parsing.

fn from_str(src: &str) -> Result<isize, ParseIntError>

Parses a string s to return a value of this type.

impl PartialEq<isize> for isize

fn eq(&self, other: &isize) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &isize) -> bool

This method tests for !=.

impl BitXor<isize> for isize

type Output = isize

The resulting type after applying the ^ operator

fn bitxor(self, other: isize) -> isize

The method for the ^ operator

impl<'a> BitXor<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the ^ operator

fn bitxor(self, other: isize) -> isize::Output

The method for the ^ operator

impl<'a> BitXor<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the ^ operator

fn bitxor(self, other: &'a isize) -> isize::Output

The method for the ^ operator

impl<'a, 'b> BitXor<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the ^ operator

fn bitxor(self, other: &'a isize) -> isize::Output

The method for the ^ operator

impl Div<isize> for isize

This operation rounds towards zero, truncating any fractional part of the exact result.

type Output = isize

The resulting type after applying the / operator

fn div(self, other: isize) -> isize

The method for the / operator

impl<'a> Div<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the / operator

fn div(self, other: isize) -> isize::Output

The method for the / operator

impl<'a> Div<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the / operator

fn div(self, other: &'a isize) -> isize::Output

The method for the / operator

impl<'a, 'b> Div<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the / operator

fn div(self, other: &'a isize) -> isize::Output

The method for the / operator

impl Product<isize> for isize

fn product<I>(iter: I) -> isize where I: Iterator<Item=isize>

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a isize> for isize

fn product<I>(iter: I) -> isize where I: Iterator<Item=&'a isize>

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Shl<u8> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: u8) -> isize

The method for the << operator

impl<'a> Shl<u8> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: u8) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a u8> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u8) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a u8> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u8) -> isize::Output

The method for the << operator

impl Shl<u16> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: u16) -> isize

The method for the << operator

impl<'a> Shl<u16> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: u16) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a u16> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u16) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a u16> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u16) -> isize::Output

The method for the << operator

impl Shl<u32> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: u32) -> isize

The method for the << operator

impl<'a> Shl<u32> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: u32) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a u32> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u32) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a u32> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u32) -> isize::Output

The method for the << operator

impl Shl<u64> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: u64) -> isize

The method for the << operator

impl<'a> Shl<u64> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: u64) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a u64> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u64) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a u64> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u64) -> isize::Output

The method for the << operator

impl Shl<u128> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: u128) -> isize

The method for the << operator

impl<'a> Shl<u128> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: u128) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a u128> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u128) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a u128> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a u128) -> isize::Output

The method for the << operator

impl Shl<usize> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: usize) -> isize

The method for the << operator

impl<'a> Shl<usize> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: usize) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a usize> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a usize) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a usize> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a usize) -> isize::Output

The method for the << operator

impl Shl<i8> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: i8) -> isize

The method for the << operator

impl<'a> Shl<i8> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: i8) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a i8> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i8) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a i8> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i8) -> isize::Output

The method for the << operator

impl Shl<i16> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: i16) -> isize

The method for the << operator

impl<'a> Shl<i16> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: i16) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a i16> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i16) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a i16> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i16) -> isize::Output

The method for the << operator

impl Shl<i32> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: i32) -> isize

The method for the << operator

impl<'a> Shl<i32> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: i32) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a i32> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i32) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a i32> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i32) -> isize::Output

The method for the << operator

impl Shl<i64> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: i64) -> isize

The method for the << operator

impl<'a> Shl<i64> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: i64) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a i64> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i64) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a i64> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i64) -> isize::Output

The method for the << operator

impl Shl<i128> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: i128) -> isize

The method for the << operator

impl<'a> Shl<i128> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: i128) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a i128> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i128) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a i128> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a i128) -> isize::Output

The method for the << operator

impl Shl<isize> for isize

type Output = isize

The resulting type after applying the << operator

fn shl(self, other: isize) -> isize

The method for the << operator

impl<'a> Shl<isize> for &'a isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: isize) -> isize::Output

The method for the << operator

impl<'a> Shl<&'a isize> for isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a isize) -> isize::Output

The method for the << operator

impl<'a, 'b> Shl<&'a isize> for &'b isize

type Output = isize::Output

The resulting type after applying the << operator

fn shl(self, other: &'a isize) -> isize::Output

The method for the << operator

impl LowerHex for isize

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Display for isize

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Zeroable for isize

impl One for isize

fn one() -> isize

Deprecated since 1.11.0

: no longer used for Iterator::product

🔬 This is a nightly-only experimental API. (zero_one #27739)

unsure of placement, wants to use associated constants

The "one" (usually, multiplicative identity) for this type.