Scribd
Upload
45 views

Computer Networking

The document provides steps to share a computer drive and connect computers to a home network. It also discusses network topologies and configuring a wireless router, including choosing its location, connecting devices to it, and configuring wireless settings in a web browser.

Uploaded by

Animim Igbanibo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
45 views

Computer Networking

The document provides steps to share a computer drive and connect computers to a home network. It also discusses network topologies and configuring a wireless router, including choosing its location, connecting devices to it, and configuring wireless settings in a web browser.

Uploaded by

Animim Igbanibo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

How to Share (c)

Click on your computer


Right Click on drive C;
Click on properties
Click on advance sharing
Click on sharing this folder and apply
To see if the computers are connected and are seeing
each other, click on start, my computer on the same
home group, click on the LAN network from the task bar
on the desktop.
Click on network and sharing center
Click on home group, choose home group and click join
Enter the administrative password and click next and
then finish after joining
Password: cRIXc7G2dJ
Things to look out for in network
1. Ensure LAN is enabled
Share C:
Name PC
Same work group
Use default I.P address

DTE DCE
1)Computers Gateway modem
2)Router Switch, hub
3)DTE DCE
A A
PC PC
4) DTE DTE
PC POWER
A B
A B
Network topology
Host -- Server
Wireless Networking
Router – Wireless
Computer – wireless enabled
PC/Ethernet wireless card
Router:- It helps to transfer data packets across networks

Router Configuration
1)Choose a convenient location during initial installation
2)Connect the router to power and turn on.
3)Connect your internet modem to the router via a USB
cable.
4)Connect on to the router via a network cable it is a
wireless even though it is a wireless connection.
Once the wireless or router configuration is
complete, the computer can then be changed to a
wireless configuration.
5)Open the router setup/configuration platform through
the computer that is connected to the router, to do
this, open your web browser (opera, firefox, explorer)
enter the router admin address, or consult your router
manual difficult router have different admin address
e.g. http 192.162.1.1 or 192.168.0.1
6)Enter the router name and password or consult the
router manual for an exact username and password.
7)To connect your router to the internet you must choose
the point to point protocol over Ethernet (PPOT) option.
You must choose the internet protocol (I.P) you must
choose the internet mask address, you must choose
your gateway given to you by your internet service
provider (ISP).
Name of some ISP, internet service provider:
COOLINK
CINFORES
SWIFT
POPC (direct on PC)
HYPERIA
ZOOM
Or
You choose the dynamic host communication
protocol (DICP) option to assign I.P address
automatically.
8)You must name your WLAN (wireless area network).to
name your WLAN you must choose the service set
identifier (SSID). SSID is a name of a WLAN.
All wireless/computer devices on WLAN must bear the
same SSID in order to communicate with each other.
SSID are case sensitive.
To change SSID password.
Enter your browser
Type 192.168.1.1
Admin= admin
Password: resac (12345)

Router name Default I.P Username


Password
Address
3-com 192.168.1.1 adminttd Adminttd
Cisco 196.168.62.1 Cisco Cisco
N/a San-fran

D-link 192.168.0.1 n/a n/a


D-link 192.168.0.30n/a n/a
D-link 192.168.0.50 n/a n/a
D-link 192.168.1.1 Admin Admin
n/a 1234
n/a Year 2000
Linksys 192.168.1.1 admin Admin
192.168.1.251 admin Admin
Netgear 192.168.0.1 admin Password
192.168.0227 Admin Password
n/a 1234
n/a 1234
zoom 217.212.231.174 admin admin

You might also like