Scribd
Upload
20 views

Solar Power System Design Guide Example

This document provides a guide for sizing solar power system components based on daily energy consumption. It outlines steps to determine battery chemistry and capacity needed. For a sample daily load of 4kWh, a lithium battery system would require a minimum of 1030Ah at 12V, while a lead-acid battery would need 1646Ah at 12V. The guide recommends adding capacity for losses and rounding up size. Battery banks can be wired at 12V, 24V or 48V depending on the system size.

Uploaded by

calabi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Solar Power System Design Guide Example

This document provides a guide for sizing solar power system components based on daily energy consumption. It outlines steps to determine battery chemistry and capacity needed. For a sample daily load of 4kWh, a lithium battery system would require a minimum of 1030Ah at 12V, while a lead-acid battery would need 1646Ah at 12V. The guide recommends adding capacity for losses and rounding up size. Battery banks can be wired at 12V, 24V or 48V depending on the system size.

Uploaded by

calabi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Solar Power System Design Guide

Example
Part 1: Load & Battery Storage Capacity Sizing
Step 1: Determine your typical daily power consumption
in Watt-Hours (Wh), note that 1000Wh is equal to 1kWh
(Kilo Watt-Hour).
If you already have a power meter installed, just monitor the daily
difference in electricity units consumed, or better yet get the weekly or
monthly power consumption and find the daily average by dividing the
total units consumed by the number of sampled days (7 days for a
week, 30 days for a month).

You can also estimate daily power usage by finding the power rating of
appliances used and multiplying by the number of hours run per 24hr
period, then summing up all the appliances in the household.
Example:

Appliance Power Rating Hours Used per Daily Watt-


(Watts) day Hours
Consumption
Laptop 60 10 600
Electric Kettle 2000 0.16 332
LED Bulbs 12 6 432
(6pcs)
Refrigerator 150 5 750
Phone Charger 37 1.5 56
Smart TV 60 6 360
Wi-Fi Router 18 24 432
Sound System 65 10 650
Inverter 15 24 360
(Standby)
TOTAL DAILY WATT HOUR CONSUMPTION 3972Wh

For this example, let’s assume a daily power consumption of 4kWh or


4000Wh.
Step 2: Determine the battery Chemistry and
Capacity.
Typically, there are Lead-Acid and Lithium based batteries commonly
used. For Lead, you can use Flooded Lead-Acid batteries or Sealed AGM
(Absorbed Glass Mat) batteries.

For a Lithium based battery, just use LiFePO4 (Lithium Iron Phosphate)
battery.

Its clear Lithium based battery storage for off-grid solar systems is
relatively more expensive upfront but ends up being much cheaper in
the long run. Lead acid-based battery storage is cheaper to install but
due to the low lifespan and low depth of discharge, it’s advisable to
install Lithium iron phosphate batteries for future savings. However, if
on a budget just use Flooded of AGM lead acid batteries which are more
affordable upfront. A lead acid-based battery will need to have a much
larger capacity to have the same usable capacity as a lithium-based
battery.

Days of autonomy is the number of days the battery system can


continue delivering power even in the absence of sunlight, its usually
between 2 and 5 depending on your location.

It’s good practice to add about 20% more battery capacity to the final
calculated value to cater for various system losses and gradual battery
capacity degradation due to charge-discharge cycles.
For LiFePO4 battery system:
Use Depth of discharge of 80%, 2 days of autonomy, Temperature
compensation factor of 1.1 for the lowest temperature of about 16
degrees Celsius, and inverter efficiency of 90%

Battery capacity required =


𝑫𝒂𝒊𝒍𝒚 𝑷𝒐𝒘𝒆𝒓 𝑼𝒔𝒂𝒈𝒆
*1.1
𝑫𝒊𝒔𝒄𝒉𝒂𝒓𝒈𝒆 𝒆𝒇𝒇𝒊𝒄𝒊𝒆𝒏𝒄𝒚 ∗𝑫𝒆𝒑𝒕𝒉 𝒐𝒇 𝑫𝒊𝒔𝒄𝒉𝒂𝒈𝒆

𝟒𝟎𝟎𝟎𝑾𝒉
= *1.1 = 5555 Watt hours
𝟎.𝟗𝟗 ∗𝟎.𝟖
Divide this value by 0.9 to cater for inverter conversion efficiency

5555/0.9 = 6173Watt hours


Note this is the minimum battery capacity required ignoring future
battery degradation and system losses such as cable resistance, standby
consumption etc.

Divide by battery voltage to get capacity in Amp hours (Ah)

For 12V battery;


Capacity = 6173/12 = 515Ah
Double this value for 2 days of autonomy

Final battery Capacity = 1030 Amp hours


Note: The higher the battery voltage you use, the more efficient your
system will be due to reduced electrical losses.

A 24Volt battery string (Two 12V batteries in series) will work with half
the final Amp hours value, while a 48Volt battery string (Four 12V
batteries in series) should work with a quarter of this value.

Note It’s usually a good idea to round up, to help cover inverter
inefficiencies, voltage drop and other losses. Think of this as the
minimum battery bank size based on your typical usage.

Battery banks are typically wired for either 12 volts, 24 volts or 48 volts
depending on the size of the system.

Note: It’s recommended to use no more than 2 parallel battery


connections. You can add as many batteries in series as possible, but
ensure you use matched batteries for optimal performance.
For Lead Acid based battery system:
Use Depth of discharge of 50%, 2 days of autonomy, Temperature
compensation factor of 1.1 for a lowest temperature of about 16
degrees Celsius, and inverter efficiency of 90%.
𝑫𝒂𝒊𝒍𝒚 𝑷𝒐𝒘𝒆𝒓 𝑼𝒔𝒂𝒈𝒆
Battery capacity required = *1.1
𝑫𝒊𝒔𝒄𝒉𝒂𝒓𝒈𝒆 𝒆𝒇𝒇𝒊𝒄𝒊𝒆𝒏𝒄𝒚 ∗𝑫𝒆𝒑𝒕𝒉 𝒐𝒇 𝑫𝒊𝒔𝒄𝒉𝒂𝒈𝒆

𝟒𝟎𝟎𝟎𝑾𝒉
= *1.1 = 8889 Watt hours
𝟎.𝟗𝟗 ∗𝟎.𝟓
Divide this value by 0.9 to cater for inverter conversion efficiency

8889/0.9 = 9877Watt hours


Divide by battery voltage to get capacity in Amp hours (Ah)

For 12V battery;


Capacity = 9877/12 = 823 Amp hours
Double this value for 2 days of autonomy

Final battery Capacity = 1646 Amp hours

A 24Volt battery string (Two 12V batteries in series) will work with half
the final Amp hours value, while a 48Volt battery string (Four 12V
batteries in series) should work with a quarter of this value.

Note It’s usually a good idea to round up, to help cover inverter
inefficiencies, voltage drop and other losses. Think of this as the
minimum battery bank size based on your typical usage.

Battery banks are typically wired for either 12 volts, 24 volts or 48 volts
depending on the size of the system.

Note: It’s recommended to use no more than 2 parallel battery


connections. You can add as many batteries in series as possible, but
ensure you use matched batteries for optimal performance.

You might also like