Scribd
Upload
44 views

Fadal Commands

Uploaded by

gachitudrema69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views

Fadal Commands

Uploaded by

gachitudrema69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Fadal Commands

The more you know about the available commands on your Fadal control, the more efficient you become running the
machine. Below is a complete list of Fadal commands with a brief description of what the command does.

Description Command Parameters


Auto AU, From, to, dry run option, direct block start.
Axis no. Amount to center at negative limit again at the positive
Backlash BL, 1,2,3
limit
Change device CD, Baud rate, line feed option, command echo, device option
Change program blocks CH, From, through which program blocks
Copy program blocks CO, From, through, to just after
Command lock CL This locks out certain functions of the control
Cold start CS This zeros your machine upon startup
Display bucket # DD
Delete program blocks DE, From, through
Diagnostic mode DI For service personal only
Display fixture offsets DF
Display feed forward DFF
Display tool table DT
Display tool time DTT
Direct numerical control DNC (DNCX) Video option, error option, dry run, start block number
Draw DR Displaying from, through, CRC option, list option
Display variable table DV
Fixture offset FO Number, X, Y & Z amounts
Home all axes HO
Insert program blocks IN, From, increment
Learn mode LE First block number, increment
List program blocks LI, From, through
Macros MA
Memory ME
Menu MU
Manual data input MD
This will erase the current program in memory. See the PR
New program NE
command.
Program number NU, Increment for renumbering
Program maintenance PR, Program number
Program page edit PA
Punch program PU, Data option, code option, TTY option
Reinitialize RI
Parameter code (SETX, SETY, SETZ, SETA, SETB, SETHO,
Set (parameter) SET
SETME, SETIN)
Save parameters SP Parameter#, Option#

CNCPros International, Inc., 208-855-9426 | Fadal Commands 1


©Copyright 2015
This command is used to tell the control which pallet is loaded
Set (pallet) (SETPA)(SETPB)
in the machine and only occurs at start-up
SETTO SETTO Setting tool number one
SETTO, #: SETTO# Set specific tool number in the spindle
Let length offset SL, Tool number, optional change value
Sum program SU, Displaying from, through, CRC option, list option
Survey SV For use by trained technicians only
System parameters SETP
Tape reader input TA, Device option, error option, add at end
Tool changer home TC, Option
Tool parameter definition TO, Tool number, diameter, length offset.
Utility UT, Tool number
Verification of tape VT

For an in-depth description of the user codes, refer to the maintenance manual.

CNCPros International, Inc., 208-855-9426 | Fadal Commands 2


©Copyright 2015

You might also like