0% found this document useful (0 votes)
115 views

Lesson 4 - LEDs and Photodiodes

This document discusses light emitting diodes (LEDs) and photodiodes. It explains that LEDs emit light when forward biased due to electron-hole recombination. The color emitted depends on the semiconductor material. Photodiodes operate in reverse bias and generate a photocurrent proportional to light intensity. Circuits are analyzed using LEDs and photodiodes, including calculating resistor values to operate an LED at its rated current and designing a circuit to convert a photodiode photocurrent into a voltage. Videos further explain the operation of LEDs and photodiodes. The document concludes by mentioning other applications and topics for next week's lessons on transistors.

Uploaded by

S.m. Ferdous
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
115 views

Lesson 4 - LEDs and Photodiodes

This document discusses light emitting diodes (LEDs) and photodiodes. It explains that LEDs emit light when forward biased due to electron-hole recombination. The color emitted depends on the semiconductor material. Photodiodes operate in reverse bias and generate a photocurrent proportional to light intensity. Circuits are analyzed using LEDs and photodiodes, including calculating resistor values to operate an LED at its rated current and designing a circuit to convert a photodiode photocurrent into a voltage. Videos further explain the operation of LEDs and photodiodes. The document concludes by mentioning other applications and topics for next week's lessons on transistors.

Uploaded by

S.m. Ferdous
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

Lesson 4

Light Emitting Diodes (LEDs) and


Photodiodes
Learning Outcomes
• Explain the characteristics of light emitting
diodes and photo-diodes.
• Analyse simple circuits with light emitting diodes
and photodiodes.
Light Emitting Diodes (LEDs)
• LED’s are a special category of diodes which emit
light when forward biased.
• Light is emitted due to the recombination
process occurring close to the junction.
Light Emitting Diodes (LEDs)
• The colour of light emitted depends on the
material used in the construction of LED.
• When forward biased, diodes constructed out of
GaAs (Gallium Arsenide) emit light in the infra-
red (invisible) zone.
• Diodes made out of GaAsP (Gallium Arsenide
Phosphide) emit orange or red light.
LEDs
• Have a higher on-voltage (VON).
• GaAs diodes have VON of around 2 V.
• The light intensity is proportional to the forward
current.
• Light Intensity = kiD
Operation of LED
• https://www.youtube.com/watch?v=NUR9tebFD
Rc
• https://www.youtube.com/watch?v=wl45Rrt4j2
U
• https://www.youtube.com/watch?v=u3H9Z7ABV
KU
• https://www.youtube.com/watch?v=Hl4v1aUFWr
s
Example
• The simple LED circuit shown uses a GaAs diode
with VON of 2 V and maximum rated current of 20
mA. Find a suitable resistor value, so that the
diode operates at its rated current.
Solution

• Using KVL
Photodiodes
• Performs the inverse function of an LED.
• A photodiode is operated in its reverse-bias
region.
• A light shining on semiconductor material has
enough energy to break co-valent bonds and
create free electron-hole pairs.
Photodiodes
• These free electron-hole pairs would increase the
reverse saturation current.
• The photocurrent is proportional to light
intensity.
• Photodiode characteristic:
Photodiode Characteristic
Example
• A given photodiode generates up to 50 A of
current under typical lighting conditions. Design
a circuit that converts the photocurrent into a
voltage, and select element values such that a
current of 50 A is converted into a 5 V output.
Solution

• Use Ohm’s Law:


• For the given specification
Operation of Photodiode
• https://www.youtube.com/watch?v=KgKcbW77t
xY
• https://www.youtube.com/watch?v=UoHgPZzu_
g8
• https://www.youtube.com/watch?v=8k9UIlwo7
W4
• https://www.youtube.com/watch?v=n3CIV0ctN
Ms
Opto-coupler or Opto-isolator
• Combination of an LED and photodiode
Other Applications
• Alarm system Counter operation

Reference: R. L. Boylestad and L. Nashelsky (2013) Electronic Devices and Circuit Theory (11th ed), Upper Saddle River: Pearson, pp. 826
Next Week
• Lesson 5: Transistor Behaviour and Models
• Lesson 6: The Transistor Inverter

You might also like